Brica firefly baby-in-sight User manual

Owner’s Manual
Notice d’utilisation
Firefly™ Baby In-Sight®Car Safety Mirror
Firefly™ Baby In-Sight®Miroir d’auto de sécurité
KEEP FOR FUTURE REFERENCE
À CONSERVER POUR TOUTE CONSULTATION FUTURE
CCD-0176-000 Rev 2

Important Information
3
Contents | Contenu
2 3
IMPORTANT INFORMATION
Warnings................................................................................................................................................ 4
FCC Information ..................................................................................................................................4
HOW TO USE
Included Parts ...................................................................................................................................... 5
Using The Mirror .................................................................................................................................6
Installing Batteries .............................................................................................................................. 7
Attaching The Mirror...........................................................................................................................8
Cleaning ............................................................................................................................................... 10
CUSTOMER SERVICE
Contact Us ........................................................................................................................................... 10
RENSEIGNEMENTS IMPORTANTS
Précautions...........................................................................................................................................12
Déclaration De La CC .........................................................................................................................13
MODE D’EMPLOI
Pièces Comprises................................................................................................................................14
Utilisation Du Miroir...........................................................................................................................15
Installation Des Piles ........................................................................................................................ 16
Fixation Du Miroir ...............................................................................................................................17
Nettoyage............................................................................................................................................ 19
SERVICE À LA CLIENTÈLE
Contactez-nous .................................................................................................................................. 19
WARNING!:
• Prevent strangulation or entanglement. Never place in or attach to a crib. Never add
strings or ties to the product. Never leave child unattended.
• Inside car temperatures can rise rapidly and create a safety hazard. Children have died
when left unattended inside vehicles.
• Do not attach to vehicle’s tether anchor if child safety seat is installed with the same
tether anchor.
• Keep mirror out of baby’s reach and direct sunlight. Always follow car seat
manufacturer’s directions for correct installation and position of child safety seat.
• Do not operate while driving.
• Always verify that the mirror is properly secured. Check frequently.
Discard and replace if damaged.
• Cut the plastic attachments with wire cutters and discard the pieces.
BATTERY INFORMATION
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium,
lithium-ion) batteries.
• Do not charge non-rechargeable batteries.
• Insert batteries in the correct polarity position.
• Do not short circuit battery terminals.
• Remove batteries during long periods of non-use. Always remove exhausted batteries
from product. Dispose of batteries properly.
• Use caution when opening battery compartment as some batteries may leak,
explode or catch on fire.
• Rechargeable batteries are to be removed before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not submerge in water or other liquids.
CR2032
Lithium Battery
3 V
This is actual size.
1.5V x 3
“AA” (LR6)
This is actual size.
BATTERIES
• Actual Size
• Included

How to Use How to Use
5
Important Information
4
FCC INFORMATION
The device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may cause undesired
operation.
WARNING!: Changes or modifications to this unit not
expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and if not installed and used
in accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular instal-
lation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to
try to connect the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver. Connect the equipment
into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This CLASS(B) DIGITAL APPARATUS complies with CANADIAN ICES-3 (B)/NMB-3(B)
INCLUDED PARTS
MIRROR FRONT
a. Soothing Mode
a
REMOTE CONTROL FRONT
j. Remote Transmitter
k. Entertainment Mode
l. Soothing Mode
m. Volume Buttons
j
k
l
m
REMOTE CONTROL BACK
n. Visor Clip
o. Battery Compartment
n
o
MIRROR BACK
b. D-Ring
c. Adjustable Stand
d. Battery Compartment
e. ON/OFF Switch
f. Fastener
g. Clamp
h. Strap
i. Clip
i
d
b
e
c
f
g
h

How to Use How to Use
6 7
USING THE MIRROR
Before use, remove the plastic demo tab located on the back of the mirror battery
box to exit "demo mode."
1. Move the ON/OFF switch on the back of the mirror to the ON position. NOTE: While
the switch is in the OFF position, none of the mirror's functions can be activated.
2. Select desired mode.
ENTERTAINMENT MODE 12 MINUTES
Press on the remote control to activate Entertainment Mode. Press again during
playback to stop.
SOOTHING MODE 12 MINUTES
Press on the remote control or on the front of the mirror to activate Soothing Mode.
Press again during playback to stop.
NOTE: For optimum performance, ensure the remote control has an unobstructed
view of the mirror.
3. Adjust volume using or on the remote control.
AUTO STOP: All modes stop automatically after 12 minutes. Press the same button again
to restart, or press another button to activate a different mode.
COMPLETE SHUT-OFF: To shut off all mirror functions completely, move the ON/OFF
switch on back of mirror to the OFF position.
INSTALLING BATTERIES
MIRROR BATTERIES
3 AA batteries are included for in-store demonstration
only. Battery life may be impaired. Replace with 3 new
AA alkaline batteries for normal use.
1. Unscrew the battery compartment door using a
Phillips-head screwdriver.
2. Insert 3 new AA batteries. Ensure correct polarity
as indicated in the battery compartment.
3. Close the compartment door and tighten the
screw. Do not overtighten.
NOTE: Under normal use, the batteries in the mirror
will require replacement more often than the battery
in the remote control. When the mirror's music
becomes faint, replace the batteries in the mirror.
REMOTE CONTROL BATTERY
Remote comes with battery already installed.
1. Unscrew the battery compartment door using
a Phillips-head screwdriver.
2. Insert 1 new CR2032 button cell battery.
Ensure correct polarity as indicated in the
battery compartment.
3. Close the compartment door and tighten the
screw. Do not overtighten.
NOTE: If the mirror does not respond to the remote
control, please check the orientation of the battery
in the compartment.

How to Use How to Use
8 9
ATTACHING THE MIRROR
ON BACKSEAT HEADREST
1. Raise backseat headrest and slide clamp
underneath.
2. Wrap adjustable stand over top of headrest.
3. Bend clamp upward to conform to headrest.
4. Attach strap's clip to D-ring.
5. Lower headrest to secure mirror in place.
6. Tighten strap and adjust mirror to desired
angle so that the child is visible to the driver
in the vehicle's rearview mirror.
ON BENCH SEAT
1. Position mirror on top of seat back.
2. Bend clamp to conform to top of seat back.
3. Squeeze clamp firmly to secure mirror in place.
4. Unfasten adjustable stand from clamp and tilt
mirror to desired angle so that the child is visible
to the driver in the vehicle's rearview mirror.
NOTE: If a tether anchor is accessible and not in use
by a child safety seat, attach strap's clip to tether
anchor and tighten strap. This will help increase the
stability of the mirror. If you own a minivan, station
wagon or SUV, you may need a tether extender to
reach the tether anchor. Please visit munchkin.com
or call 1-800-344-2229 to purchase a tether extender.
Strap
Clamp
ClipD-ring
Adjustable
stand
Fastener
Attache
Clamp
Pince
Adjustable
stand
Clamp
USING TETHER ANCHOR
IMPORTANT: Do not attach this mirror to your
vehicle’s tether anchor if a child safety seat is using
the same anchor.
1. Position mirror on seat back in front of tether
anchor location.
2. Insert clamp between seat back and rear deck
of your vehicle.
3. Bend clamp to conform to shape of seat back.
4. Attach strap's clip to vehicle tether anchor
and tighten strap.
5. Unfasten adjustable stand from clamp and tilt mirror
to desired angle so that the child is visible to the
driver in the vehicle's rearview mirror.
NOTE: If you own a minivan, station wagon or SUV, you may need a tether extender to
reach the tether anchor. Please visit munchkin.com or call 1-800- 344-2229 to purchase
a tether extender.
ON FRONTSEAT HEADREST
IMPORTANT: This method is used for mounting
mirror to backside of front seat to entertain forward-
facing children.
1. Raise headrest and slide clamp underneath.
2. Wrap adjustable stand over top of headrest.
3. Bend clamp to conform to shape of seat back.
4. Attach strap's clip to D-ring.
5. Lower headrest to secure mirror.
6. Tighten strap and adjust mirror so that the child
can see themselves.
Strap
Clamp
Clip D-ring
Adjustable
stand
Adjustable stand
Strap
Clip
Tether anchor
Clamp