Bridge ESOL Static Fogger User manual

ESOL™static fogger
User manual

Specifications:

Important instructions
When using the ESOL fogger, basic electrical safety precautions should always be
followed.
WARNING: TO AVOID THE RISK OF ELECTRICAL SHOCK, FIRE OR INJURY TO
PERSON, ALWAYS MAKE SURE THE PRODUCT IS UNPLUGGED FROM THE
ELECTRICAL OUTLET BEFORE RELOCATING, SERVICING, OR CLEANING IT.
•Read all the instructions before using the ESOL fogger
•Use this ESOL fogger only as described in this manual. Anything outside the guidelines is
not recommended, may cause fire, electric shock or injury to persons
•Ensure all packaging is removed before use
•Check the power cord and plug regular for damage. If the power cord or plug is damaged,
DO NOT use. It must be replaced by manufacturer or a qualified person in order to avoid
an electrical hazard
•DO NOT pull the cord too hard as it could damage and fray. If it becomes damaged after
prolonged useitshouldberepairedbyaqualifiedtechnician
•Ensure that the voltage used corresponds to the voltage indicated on the rating plate
•DO NOT allow the power cord to touch hot surfaces and DO NOT place near hot gas or
electric burners
•Place the ESOL fogger on a flat, level surface away from direct sunlight
•NEVER operate the unit without ESOL or water
•Use only clean, cool water to fill the tank. (If you have hard tap water, it is strongly
suggested to use distilled water)
•During operation, rotate the mist nozzle so it aims away from children,walls and
furniture
•DO NOT add medication of any type into the nozzle, base or water tank
•DO NOT cover any openings on the unit or insert objects into any openings
•DO NOT tilt or tip the unit or attempt to empty or fill while in operation
•DONOT leave the unit unattended in closed rooms for a long period of time as the air could
become saturated and leave condensation on walls or furniture. Always ensure good
ventilation
• Toprotect against electric shock, donot immerse unit,plug orcordin water or other liquids
•Keep the cord away from areas where it could be walked on or tripped over

•Close supervision is necessary when any appliance is used by or near children
•To disconnect, first turn the unit OFF, grip the plug and pull from the wall outlet. Never
pull the plug by the cord
•Turn the unit OFF and unplug from the outlet when not in use
•Turntheunit OFF when moving to another location and before cleaning
• DONOToperatetheESOL fogger inthepresence ofexplosive and/or flammable fumes
•DO NOT place the ESOL fogger or any parts near an open flame, cooking or other
heating appliance
• Theuseofattachments notrecommended bythemanufacturer may be hazardous
•DO NOT place ESOL fogger on a wooden or polished surface
•DO NOT operate if the housing is damaged
•There are no user serviceable parts in this product. Refer servicing to a qualified
person
•This is NOT a toy
To prolong the life of this ESOL fogger, run through once a week with tap water. Do
not add fragrance or oil in the water, it will cause the machine to malfunction and
void thewarranty.
2

Parts Description :
Directional Mist Nozzle
Four Directional MistNozzle
Small Lid
TopCover Medium Lid
Water TankStand
Water-RetainingPlate
Water Stop Valve
”Water Tank
Water Blocking Plate
Display Screen
Base
Solenoid Valve
Mist Block Plate
PCB Board
Bottom Plate
Shell

Operating Instructions
Ensureunitisnot plugged intomainswhenfillingwithESOL — switchoffandunplug
Place unit on a smooth level surface that can support the unit when filled with
ESOL. Lift and remove the top small cover
NOTE: Do not lift unit when full, please use the wheels to move to desired area
Plug inpower source andpress the Power button — the power on indicator
will illuminate (Green) (for ESOL fogger+ only)
To adjust mist intensity, turn the control knob clockwise to increase and — anti
clockwise to decrease
If the Red indicator light illuminates after powering on, either the unit is out of water
or tank is not properly aligned. (See trouble shooting) (for ESOL fogger+ only)
Use the multiway directional nozzle to help vapor dispel. Ensurevapor is directed
away from walls and furniture
Pay attention to the ESOL level —add ESOL when low
(Red indicator light illuminates when water is out) (for ESOL fogger+ only)

• DO NOT clean whilst the unit is switched on. Turn off power and unplug unit
• DO NOT use cleaning detergents or chemicals to clean the tank or base.
Detergent dissolved in the water supply can interfere with the mistoutput
• Wipe the exterior of the body with a damp cloth
• DO NOT spray water or any liquid onto the control
• Never immerse the base in water or let water enter the air outlet or other
openings
• Clean and rinse the water tank and mist nozzle with lukewarm water
frequently to avoid mineral build up
• Keep the nebulizer and water sensor free of mineral deposits. Remove water tank
and empty the reservoir. Clean the nebulizer and sensor with a soft brush (old
toothbrush)
• DO NOT scrape the nebulizer or water sensor
• DO NOT clean with tools that have metal parts
• DO NOT leave water to sit in the tank for more than a couple days as it may cause
bacterial growth
• Always empty the tank if not planning to use for a few days
Storage
• When not in use, store in a cool dry location. To prevent dust and dirt use the
packaging to repack the unit
• Follow the maintenance instructions
• If water is left in the unit during storage, it may harden and leave deposits that
may affect the unit from operating properly
• Leave the cap of the water tank loose. This will prevent the cap and gasket from
sticking together and prolong the life of the gasket

Problem Solving
PROBLEM
REASON
SOLUTION
Light off, fan not working,
no mist.
Power not connected or
issue with power source.
Try another power socket.
Lighton,fannotworking,
no mist.
Too much water is in the
base.
Pour out water from the
base and restart.
Only a small amount
of mist.
Transducer cover by furring.
Clean the furring away
and change water.
Water can not reach
base.
Valve stuck or water tank
positioned incorrectly on base.
Clean valve and reposition the
water tank onto base.
Water higher than
the mark.
Pouroutsomewatertillits
lower thanthe mark.
General advice
Always use a hygrometer to check the humidity levels are correct.
In cold weather, windows and walls may sometimes fog or develop excess
condensation from too much humidity. If this occurs, reduce the mist intensity
setting.
Allowing too much moisture to accumulate, could allow bacteria and fungi to
grow, and can also damage furniture, walls and wallpaper.
To prolong the life of this humidifier, using distilled water is highly recommended. Do
not add fragrance or oil in the water, it will cause the machine to malfunction and void
the warranty.
Conformity with directives
This product is CE marked to denote conformity with Directives 2014/35/EU
(low Voltage) and 2014/30/EU (Electromagnetic Compatibility), as amended.
Environmental protection
Disposal
This marking indicates that this product should not be disposed
with other household wastes throughout the EU. To prevent possible
harm totheenvironment or human health from uncontrolled waste
disposal, recycle it responsibly to promote the sustainable reuse of
material resources.

Warranty
Thisproductisguaranteedunderwarrantyandcoversdefects in materialorworkmanship from1
yearofdateofpurchase.Theoriginalbillofpurchase (withpurchasedate)mustbesubmitted.
•Thewarranty willnotapplyincasesof:
•Misuse:bynon-complianceoftheinstructions
•Normal wearandtear
•Incorrectuse,e.g.overloading,non-approvedaccessories
•Forceordamaged causedbyexternalforces
•Iftheplughasbeentamperedwithorremoved
•Partiallyorcompletely dismantled product
•Interference by non-qualified persons
ESOL reordering
To reorder ESOL for fogging visit:
https://www.bridgebiotechnology.com/product/fogging/
Alternatively, you can email us at ord[email protected]
Contact details
Bridge Biotechnology
4 Castle Court
Carnegie Campus
Dunfermline
Fife
KY11 8PB