Briggs & Stratton 20228 User manual

Safety Rules
SAVE THESE [NSTRUCTmONS
TABLE OF CONTENTS
Section H oSafety RuHes .......................... 2-4
Section 2 - Features and ControHs ................... 5
Section 3 o AssembHy ............................ 6-8
Section 4 o Operation .......................... 9- H3
Section 5 ° Product Specifications ................... H4
Section 5 o Maintenance ........................ H4oH6
Section 6 o Storage .............................. H7
Section 7 oTroubleshooting ........................ H8
Warranty ...................................... H9
EQUmPNENT
-] Read this manuamcarefummyand become famimiar
pressure washer. Know its
Jwith
...... your
appmications,its mimitations _d any hazards
invomved.
This manuaH contains information for a pressure washer
that operates up to a maximum of 2,200 PSI and at a
maximum flow rate of 2.2 gallons per minute.This high
quality residential system features 14" wheels, axial cam
pump with stainHess steel pistons, automatic cooH down
system, chemical iniection system, and a variety of nozzle
sizes.AHso incHudes safety goggHes, heavy duty 25' hose, and
more.
Every effort has been made to ensure that information in
this manual is accurate and current. However, we reserve
the right to change, alter or otherwise improve the product
and this document at any time without prior notice.
SAFETY RULES
This is the safety amert symbol it is used to
amert you to potentiam personam iniury hazards_
Obey atomsafety messages that fommow this
symbom to avoid possibme iniury or death.
The safety aHert symboH (_) is used with asignaH word
(DANGER, CAUTION,WARNING), a pictoriaHand/or a
safety message to aHert you to hazards. DANGER indicates
a hazard which_ if not avoided_ will resuHt in death or serious
iniury. WARNING indicates a hazard which, if not avoided,
could resuHt in death or serious iniury. CAUTION
indicates a hazard which, if not avoided, might resuHt in
minor or moderate iniury. CAUTION, when used
without the aHert symbol indicates a situation that couHd
resuHt in equipment damage. FoHHow safety messages to
avoid or reduce the risk of iniury or death.
[
Hazard Symbols and Meanings
Toxic Fumes
Slippery Surface
Fire
Electrical Shock
Fail Fluid Hniection
Explosion Hot Surface
Moving Parts Hying Obiects Kickback

Section 1: Safety RuJes
WARNING
Operate pressure washer ONLY outdoors.
Keep exhaust gas from entering a confined area through
windows, doors, ventilation intakes or other openings.
DO NOT operate pressure washer inside any building or
endosure.
Use a respirator or mask whenever there is a chance that
vapors may be inhaled.
Read all instructions with mask so you are certain the mask wilI
provide the necessary protection against inhaling harmful vapors.
WARNING
Keep spray nozzle between 8 to 24 inches away from cleaning
Surface,
Operate this unit on a stable surface.
The cleaning area should have adequate slopes and drainage to
reduce the possibility of a fall due to slippery surfaces.
Be extremely careful if you must use the pressure washer from
a ladder; scaffolding or any other relativdy unstable location.
Firmly grasp spray gun with both hands when using high
pressure spray to avoid injury if gun kicks back.
When starting engine, pull cord slovdy until resistance is felt
and then pull rapidly to avoid kickback.
If engine starts and fails to continue to run or if increased
resistance is felt during starting pull attempts, squeeze trigger
on spray gun.
WARNING
WHEN ADDmNG FUEL
Turn pressure washer OFF and let it cool at least 2 minutes
before removing gascap,
Fillfi]eI tank outdoors.
DO NOT overfill tank.AIIow space for"fuel expansion.
Keep fuel away E'om sparks, open flames, pilot lights, heat, and
other" ignition sources.
DO NOT light a cigarette or smoke.
VHEN OPERATING EQUIPMENT
•Transport/repair with fue! tank EHPTY or with fue! shutoff
valve OFE
WHEN STORING FUEL OR EQUIPMENT WiTH FUEL
iN TANK
Store away from furnaces, stoves, water heaters, clothes
dryers or other appliances that have pilot light or other
ignition source because they can ignite fuel vapors.
WARNING
NEVER aim spray gun at people, animals or plants.
DO NOT allow CHILDREN to operate pressure washen
NEVER repair" high pressure hose. Replace it.
Keep high pressure hose connected to pump and spray gun
while systemis pressurized,
Squeezetrigger on spray gunto relieve trapped pressure,
every time you stop engine. Engagetrigger lock on spraygun.
WARNING
Keep water spray away from electric wiring or fatal electric
shock may result.
0

Section 1: Safety Rules
WARNING
DO NOT touch hot surfaces,
Allow equipment to coo[ before touching.
The pressure washer must be at least 5 feet from structures
having combustible walls and/or other combustible materials.
Keep at least 3feet of clearance on all sides of pressure
washer for adequate cooling, maintenance and servicing.
In the State of California a spark arrester is required by law
(Section 4442 of the California Public Resources Code). Other
states may have similar laws. Federa[ laws apply on federal
lands. [f you equip the muffler with a spark arrester; it must be
maintained in effective working order:
WARNING
. DO NOT wear loose clothing, ieweIry or anything that may
be caught in the starter or" other rotating parts.
. Tie up long hair and remove jewelry;
WARNING
. Always wear eye protection when using this equipment or in
vicinity of where equipment is in use.
WARNING l
WHEN ADJUSTING OR MAKING REPAiRSTOYOUR
PRESSURE WASHER
Disconnect spark plug wire from spark plug and place wire
where it cannot contact spark phJ 8.
CAUTION
DO NOT tamper with governed speed.
DO NOT operate pressure washer above rated pressure.
CAUTION
DO NOT secure spray gun in open position,
DO NOT leave spray gun unattended while machine is
running.
NEVER use a spray gun which does not have a trigger lock or
trigger guard in place and in working order:
Always be certain spray gun, nozzles and accessories are
correctly attached.
DO NOT point spray gun at glass when using PIAX (pin
point) nozzle.
NEVER aim spray gun at plants,
If you have questions about intended use, ask dealer or
contact griggs & Stratton Power Products.
NEVER operate units with broken or missing parts, or
without protective housing or covers,
DO NOT by-pass any safety device on this machine.
Before starting pressure washer in cold weather, check all
parts of the equipment to be sure ice has not formed there.
NEVER move machine by pulling on high pressure hose. Use
handle provided on unit.
Check fuel system for leaks or" signs of deterioration, such as
chafed or spongy hose, loose or missing damps, or damaged
tank or cap. Correct all defects before operating pressure
waghe[:
This equipment is designed to be used with Briggs & Stratmn
Power Products authorized parts ONLY. If equipment is used
with parts that DO NOT comply with minimum specifications,
user assumes all risks and liabilities_

Features and Controls
KNOWYOUR PRESSURE WASHER
Read this owner's manual and safety rules before operating your pressure washer,
Compare the ilhstradons with >,our pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
Spray Gun Nozzle Extension
with Quick Connect
AccessoryTray Turbo Nozzle
ProiectPro TM
Recoil Sgarter Nozzles
Air Filter
Primer Bulb
Throttle Lever
High Pressure Hose
Oil Fill/Dipstick
High Pressure Outlet
& VVater inlet
Chemical Injection
Accessory Tray -- Provides convenient storage for
standard and optional accessories_ such as brushes_ turbo
wands_etc.
Air Filter -- Protects engine by filtering dust and debris
out of intake air.
Automatic Cool Down System -- Cycles water
through pump when water reaches [25°, [55°E'Warm
water will discharge from pump onto ground.This system
prevents internal pump damage.
Chemical injection Siphon/Filter -- Use to siphon
detergent or other pressure washer chemicals into the low
pressurestream.
DataTag (not shown, near rear of base pmate) -
Provides mode[ and serial number of pressure washer.
Please have these readily available if calling for assistance.
Fue[ Tank -- Fill tank with regular unleaded fuel.Always
leave room for fuel expansion,
High Pressure Hose -- Connect one end to water
pump and the other end to spray gun.
Pump equipped with
Automatic Cool Down System
High Pressure Outlet -- Connection for high pressure
hose.
Nozzme Extension with Quick Connect --Allows you
to switch between four different nozzles.
Oil Fill/Dipstick -- Check and fill with oil here.
Primer Bumb -- Prepares a cold engine for starting.
Pump -- Develops high pressure.
Recoil Starter -- Used for starting the engine manually.
Spray Gun -- Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.
ProjectPro TMNozzmes -- Detergent_ Max, General and
Delicate nozzles: for various pressure cleaning applications.
Throtde Lever -- Sets engine in starting mode for recoil
starter and stops a running engine.
Turbo Nozzle -- Ro[ates a high pressure stream in a
rapid circular pattern.
Water [rimer -- Connection for garden hose.

ASSEMBLY
iMPORTANT: Read entire owner's manuai before you
attempt to assemble or operate your new pressure washer.
Remove Pressure Washer From
H. Remove the parts bag, accessoNes, and inserts inciuded
with pressure washer.
2. SHice two corners at the end of carton from top to
bottom so the panei can be foided down fiat.
3. Remove pressure washer from carton.
Carton Contents
items in the carton include:
Hain Unit
Handle
High Pressure Hose
Spray Gun
Nozzie Extension with Quick Connect Fitting
Piastic Accessory Tray
Safety Go_les
OH Bottle
Turbo Nozzle with Quick Connect
Parts Bag (which includes the following):
Owner's Hanual
Engine Hanual
Owner's Registration Card
Bag containing 4multi-colored ProjectPro TM
Nozzles
Handle/Tray Fastening Hardware Kit (which
inciudes):
Carriage Bolts (2)
Piastic Knobs (2)
Tree Clips (4)
PREPARING PRESSURE
WASHER FOR USE
If you have any problems with the assembly of your
pressure washer or if parts are missing or damaged, cail the
pressure washer helpline at J-8e0-743-41 l S. If calling for
assistance, please have the model revision, and serial
number from the data tag available.
To prepare your pressure washer for operation, you
will need to perform these tasks:
I. Fill out and send in registration card.
2. Attach handle to main unit, then attach accessory tray
to handle.
3. Add oii to engine crankcase.
4. Add fuel to fuel tank.
S. Connect high pressure hose to spray gun and pump.
6. Connect water suppiy to pump.
7. Attach nozzle extension to spray gun.
8. Selecdattach quick connect ProjectPro TMnozzle to
nozzle extension.
Attach Handle and Accessory Tray
l, Place handle onto handle supports connected to main
unit. Hake sure holes in handle align with holes on
handle supports (Figure I).
NOTE: It may be necessary to move the handle supports
from side to side in order to align the handle so it will slide
over the handle supports,
0

Section 3: Assembly
2. Insert carriage bolts through holes from outside of unit
and attach a phstic knob from inside of unit (Figure 2).
Tighten by hand.
3. Placeaccessorytray over holes on handle (viewing
from front of unit). Pushthe tree clips into the holes
until they sit fiat againstthe accessory tray (Figure 3).
4. Insert multi-colored Pro]ectPro TMnozzles and other
supplied accessories in spaces provided in accessory
tray. See "How to Use AccessoryTray'.
Add Engine Oil and Fuel
°Place pressure washer on a [eve[ surface.
•Refer to engine manual for oil and fuel fill information.
• Damage to equipment resulting from failure to follow this
instruction will void warranty,
" Refer to engine owner's manual and follow oil and fuel
recommendations and instructions.
NOTE: Check oil often during engine break-in. Refer to
engine owner's manual for recommendations.
O

Section 3: Assembly
Connect Hose and Water Supply to
iMPORTANT: To avoid pump damage, you must assemble
the nozzle extension to the spray gun and attach all hoses
before you start the engine.
NOTE: Remove and discard the shipping caps from the
pumps high pressure outlet and water inlet before
attaching hoses.
I. Uncoil high pressure hose and attach one end of hose
to base of spray gun (Figure 4).Tighten by hand.
hose here
2. Attach other end of high pressure hose to high
pressure outlet on pump (Figure 5).Tighten by hand.
Before connecting garden hose to water inlet, inspect
inlet screen (Figure 6). Clean screen if it contains
debris or have it replaced if damaged. DO NOT RUN
PRESSUREWASHEP, IF INLET SCREEN IS DAMAGED.
Inspect inlet
screen_ DO NOT
use if damaged;
clean if dirty.
4. Run water through your garden hose for 30 seconds
to clean out any debris.
mMPORTANT: DO NOT siphon standing water for the
water supply. Use ONLY cold water (less than 100°F).
S. Connect the garden hose (not to exceed 50 feet in
length) to the water inlet.Tighten by hand (Figure 6).
Damage to equipment resulting from failure to follow this
instruction wilI void warranD,,
Turn ON the water and squeeze the trigger on the
gun to purge the pump system of air and impurities.
WARNING
Always wear eye protection when using this equipment or in
vicinity of where equipment is in use.
Before starting she pressure washer,be sure you are wearing
adequate eye protection.
Cheddist Before Startin Eg LEn ine
Review the unit's assembly to ensure you have performed
all of the following.
I. Hake sure handle is in place and secure.
2. Check that oil has been added to proper level in the
engine crankcase.
3. Add proper gasoline to fuel tank.
4. Check for properly tightened hose connections.
S. Check to make sure there are no kinks, cuts, or
damage to high pressure hose.
6. Provide a proper water supply at an adequate flow.
7. Be sure to read "Safety Rules" and "HowTo UseYour
Pressure _A/asher" before using pressure washer.
O

Operation
HOWTO USEYOUR
PRESSURE WASHER
If you have any problems operating your pressure washer,
please call the pressure washer heIpline at 1-800-743-4115.
Operate pressure washer ONLY outdoors.
Keep exhaust gasfrom entering a confined area through
windows, doors, ventilation intakes or other openings.
DO NOT operate pressure washer inside any building or
enclosure.
The pressure washer must be at least 5 ft. (I 52 cm) from
structures having combustible walls and/or other
combustible materials. Leave at least 3 ft. (92 cm) all around
pressure washer including overhea& for adequate cooling,
maintenance and servicing.
Place pressure washer in a well ventilated area, which will
allow for removal of deadly exhaust gas. DO NOT place
pressure washer where exhaust gas could accumulate and
enter inside or be drawn into a potentially occupied
building. Ensure exhaust gas is kept away from any
windows, doors, ventilation intakes or other openings that
can allow exhaust gas to collect in a confined area
(Figure 7). Prevailing winds and air currents should be taken
into consideration when positioning pressure washer.
/
/
/
/
Typical Pressu_ e
Washe_ Shown
Exhaust Port
How to StartYour Pressure Washer
To start your pressure washer for the first time, follow
these instructions step-by-step.This starting information
also applies if you have let the pressure washer sit idle for
at least a day.
I. Place pressure washer near an outside water source
capable of supplying water at a flow rate greater than
3.2 gallons per minute and no less than 20 PSI at
pressure washer end of garden hose.
2. Check that high pressure hose is tightly connected to
spray gun and pump. See "Preparing Pressure VVasher
for Use" for illustrations.
3. Hake sure unit is in a level position.
4. Connect garden hose to water inlet on pressure
washer pump. Turn ON water.
• Damage to equipment resulting from failure to follow this
instruction will void warrant>.,
5. Attach nozzle extension to spray gun (Figure 8).
Tighten by hand.
Choose ProjectPro TMnozzle you want to use, pull
back on collar of nozzle extensiom insert nozzle and
release colhr.Tug on nozzle to make sure it is securely
in place (Figure 9). See "How to Use ProiectPro TM
7. Engage trigger loci< on spray gun trigger (Figure 10).
O

Section 4: Operation
8. Start engine according to instructions given in engine
owner's manuaLAHso see operating instructions tag
Hocated on the pressure washer,
When starting engine, pull cord slowiy undJ resistance is felt
and then pull rapidly to avoid kickback.
If engine starts and fails to continue to run or if increased
resistance is felt during starting pull attempts, squeeze trigger
on spray gun.
NOTE: Always keep the throttle lever in the "Fast"
)osition when operating the pressure washer.
WARNING
DO NOT touch hot surfaces.
Allow equipment to cool before touching.
The pressure washer must be at least 5 feet from structures
having combustible wails and/or other combustible materials.
Keep at least 3feet of clearance on all sides of pressure
washer for" adequate cooling, maintenance and servicing.
In the State of California a spark arrester is required by law
(Section 4442 of the California Public Resources Code), Other"
states may have similar laws. Federal laws apply on federal
lands. If you equip the muffler" with a spark arrester, it must be
maintained in effective working order:
How to Sto Your Pressure Washer
I. Let engine idle for two minutes.
2. Turn engine off according to instructions given in
engine owner's manual,
3. Squeeze trigger on spray gun to relieve trapped
pressure in hose to avoid iniury.
NOTE: A small amount of water will squirt out when
pressure is released.
1
WARNING
Keep high pressure hose connected to pump and spray gun
while system is pressurized.
Squeeze triter on spray gun to relieve trapped pressure,
every time you stop engine. Engage triter lock on spray gun.
4. Engage trigger lock on spray gun when not in use.
The unit is equipped with an accessory tray with places to
store your spray gun_ nozzle extension, turbo nozzle_ and
ProjectPro TM nozzles.There is also a hook at the front of
the accessory tray to hold your high pressure hose.
NOTE:The extra hole in the tray is for storing a utility
brush.The brush is NOT included with your pressure
washer.You can buy the brush as an optional accessory,
I. Place nozzle extension through hole on accessory tray,
as shown in Figure II.
2. Place spray gun through hole on accessory tray on
right side of unit (Figure II).
3. Push turbo nozzle up and into clip on accessory tray
until it snaps in, as shown in Figure I I.
4. Hang high pressure hose on hook attached to accessory
tray on front of tray, as shown in Figure I I.