Brighter Extreme 350 User manual

Extreme 350

1. Introduction…………………………..……………………………………………………………..….03
2. General Guidelines…………….………………………………………………………………….…03
3. Safety Instructions……………………………………………………….....………………………04
4. Cleaning and Maintenance………………………………………………...……………………05
5. Technical Parameters…………………..…………………………………..………………………06
6. Fixture Size…………………..…………………………………...…………………………………….07
7. Color Wheel………………………………………………………………..…………………………...07
8. Gobo Wheel………………………………………………………………..……………………………07
9. Function of Buttons………………………………………………………………..…………………08
10. Menu Function………………………………………………………………..………………………..09
11. DMX Channels………………………………………………………………..…………………………10
2

Thank you for your patronage!
We are confident that our excellent products and service can satisfy you.
For your own safety, please read this user manual carefully before installing
the device.
In order to install, operate, and maintain the lighting safety correctly.
We suggest that the installation and operation should be done by the
verified technician and follow the instruction strictly.
CAUTION!
Keep this device away from rain and moisture!
CAUTION!
Unplug mains lead before opening the housing!
Every person involved with the installation, operation and maintenance of this device
has to:
-be qualified
-follow carefully the instructions of this manual
INTRODUCTION:
Thank you for having chosen this professional moving head.
You will see you have acquired a powerful and versatile device.
Unpack the device. Inside the carton box you should find:
1. One power in cable
2. One 3-Pin DMX cable
3. Two bracket clamps
4. One English user manual
（Flight case, Clamps are optional, please contact your dealer）
Please check carefully that there is no damage caused by transportation. Should
there be any questions, please consult your dealer and don’t install this device.
GENERAL GUIDELINES
This device is a lighting effect for a professional use on stages, TV, in discotheques,
theaters, etc., The device was designed for indoor use only.
This fixture is only allowed to be operated with the max alternating current which
stated in the technical specifications in 6th page of this manual.
Lighting effects are not designed for permanent operation. Consistent operation
breaks may ensure that the device will serve you for a long time without defects.
Do not shake the device. Avoid brute force when installing or operating the device.
While choosing the installation-spot, please make sure that the device is not exposed
3

to extreme heat, moisture or dust. Please don’t project the beam onto combustible
substances. The minimum distance between light-output from the projector and the
illuminated surface must be more than 0,5 meter.
If you use the quick lock cam in hanging up the fixture, please make sure the quick
lock fasteners turned in the quick lock holes correctly.
Operate the device only after having familiarized with its functions. Do not permit
operation by persons not qualified for operating the device. Most damages are the
result of unprofessional operation.
Please use the original packaging if the device is to be transported.
For safety reasons, please be aware that all modifications on the device are
forbidden. If this device will be operated in any way different to the one described in
this manual, the product may suffer damages and the guarantee becomes void.
Furthermore, any other operation may lead to short-circuit, burns, electric shock,
crash, etc.
SAFETY INSTRUCTIONS
CAUTION!
Be careful with your operations. With a dangerous voltage you can suffer a
dangerous electric shock when touching wires!
This device has left the factory in perfect condition. In order to maintain this
condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this user manual.
1. In order to guarantee the product’s life, please don’t put it in the damp places or
even the environment over 60degress.
2. Always mount this unit in safe and stable matter.
The qualified professionals are allowed to carry out the lamp installation, operation
and maintenance, but they must guarantee to operate in strict accordance with the
instructions referred to.
▲Important:
Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability for any resulting defects or
problems.
If the device has been exposed to temperature changes due to environmental
changes, do not switch it on immediately. The arising condensation could damage
the device. Leave the device switched off until it has reached room temperatures.
This device falls under protection-classⅠ. Therefore it is essential that the device be
earthed.
The electric connection must carry out by qualified person.
Make sure the power cord is never crimped or damaged by sharp edges. If this would
be the case, replacement of the cable must be done by an authorized dealer.
4

Always disconnect from the mains, when the device is not in use or before cleaning it.
Only handle the power cord by the plug. Never pull out the plug by tugging the power
cord.
During initial start-up some smoke or smell may arise. This is a normal process and
does not necessarily mean that the device is defective, it should decrease gradually.
Please don’t project the beam onto combustible substances.
If the external flexible cable or cord of this luminaire is damaged, it shall be
exclusively replaced by the manufacturer or his service agent or a similar qualified
person in order to avoid a hazard.
CAUTION!
Never touch the device during operation!
The housing may heat up!
CCAUTION!
NNever look directly into the light source,
AAs sensitive persons may suffer an epileptic shock.
Please be aware that damages caused by manual modifications to be the device are
not subject to warranty. Keep away from children and non-professionals.
CLEANING AND MAINTENANCE
1. To reduce the risk of electrical shock or fire, do not expose this unit to rain or
moisture.
2. Do not spill water or other liquids into or on to your unit.
3. During long periods of non-use, disconnect the unit’s main power.
4. It should be installed in a well-ventilated place, at a distance of 50 centimeters or
more with the walls. At the same time, please check if the fan and ventilation holes
are unobstructed.
The following points have to be considered during the inspection
1) All screws for installing the devices or parts of the device have to be tightly
connected and must not be corroded.
2) There must not be any deformations on the housing. Fixations and installations
spots(ceiling, suspension, trussing).
3) Mechanically moved parts must not show any traces of wearing and must not
rotate with unbalances.
4) The electric power supply cables must not show any damage, material fatigue or
sediments. Further instructions depending on the installation spot and usage
have to be adhered by a skilled installer and any safety problems have to be
removed.
CAUTION!
Disconnect from mains before starting maintenance operation!
5

In order to make the lights in good condition and extend the life time, we suggest a
regular cleaning to the lights.
1) Clean the inside and outside lens each week to avoid the weakness of the lights
due to accumulation of dust.
2) Clean the fan each week.
3) A detailed electric check by approved electrical engineer each three month, make
sure that the circuit contacts are in good condition, prevent the poor contact of
circuit from overheating.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth.
Never use alcohol or solvents.
TECHNICAL PARAMETERS
Input: AC100~240V, 50/60Hz
Power Consumption: 500W
Lamp source: Philips MSD Platinum 16R 330W
Zoom angle: 0°~7°(Beam mode)
5°~40°(Spot mode)
Color temperature：8000K
Control mode: DMX512/automatic and master/slave mode
PAN =540°
TILT = 250°
Pan/Tilt Resolution: 16 bit
LCD display in black white background, display flip on two-buttons
3and 5-pin DMX in/out
Channel：18CH
Electronic Focus: 0°~40°
Colors: 1 color wheel with 13 fixed colors + open with rainbow effect
Rotating gobos : 1 gobo wheel with 12 gobos+ open
Static gobos: 1 gobo wheel with 17 gobos +
open Excellent color macro effect
0~100% linear electronic dimmer
8and 24 facet rotating prism
0-100% frost effect
Various speed of strobe
effect Size: 370×300×550mm
Weight: 21kg
6

COLOR WHEEL:
GOBO WHEEL:
FIXTURE SIZE:
FIXTURE SIZE:
7

FUNCTIONS OF BUTTONS
Reversal of the display
To activate this function, press UP and DOWN keys simultaneously while the display
is in the rest mode.This status will be memorised and maintained even for the next
time it will be switched on. To return to the initial state, repeat the operation all over
again.
Confirms the displayed value, or activates the
displayed function, or enters the successive menu.
Decreases the value displayed (with auto-repetitions)
or passes to the next item in the menu.
Increases the value displayed (with auto-repetitions)
or passes to the previous item in a menu.
Return to the top level.
Commute from units, tens, hundreds, in the
"Address", "Fixture ID" and "Calibration" menu.
USING THE MENU:
1 ) Press “OK” once – “Main Menu” appears on the display.
2) Use the UP and DOWN keys to select the menu to be used:
• Setup (Setup Menu): To set the setting options.
• Option (Option Menu): To set the operating options
• Informations (Informations Menu): To read the counters, software version and
other information.
• Manual Control (Manual control Menu): To trigger the test and manual control
functions.
• Test (Test Menu): To check the proper functionning of effects
• Advanced (Advanced Menu): Access to the "Advanced menu" is recommended for
a trained technical personnel.
"Advanced" password:988
3) Press “OK” to display the first item in the selected menu.
4) Use the UP and DOWN keys to select the MENU items.
8

MENU FUNCTION
9

DMX CHANNELS
CHANNEL ST 18 CHANNEL
1Pan
2Pan Fine
3Tilt
4Tilt Fine
5Pan Tilt speed/ time
6Control
7Color
8Static gobo
9Rotation gobo
10 Gobo Rot
11 8 facet Rotating Prism
12 24 facet Rotating Prism
13 Prism Rot
14 Frost
15 Zoom
16 Focus
17 Shutter
18 Dimmer
1
Pan
0-255
Pan Movement by 540°
2
Pan Fine
0-255
Fine Control of Pan movement
3
Tilt
0-255
Tilt Movement by 250°
4
Tilt Fine
0-255
Fine control of Tilt movement
5
0-255
Pan/Tilt speed fast-slow
Control
0-129
Reserved
130-139
Lamp ON
140-149
Pan/Tilt reset
6
150-159
Colour system reset
160-169
Gobo wheels reset
170-179
Dimmer/Shutter reset
180-189
Zoom/focus/prism reset
190-199
Reserved
200-209
Total reset
10

210-229
Reserved
230-239
Lamp Off
240-255
Reserved
Color
0
Open/white
1-9
Continuous Position Colour1
orange
10-18
Continuous Position Colour2
magenta
19-27
Continuous Position Colour3
light green
28-36
Continuous Position Colour4
red
37-46
Continuous Position Colour5
aquamarine
47-55
Continuous Position Colour6
cyan
56-64
Continuous Position Colour7
lavender
65-73
Continuous Position Colour8
3200K
74-82
Continuous Position Colour9
light yellow
83-92
Continuous Position Colour10
deep green
93-101
Continuous Position Colour11
yellow
102-110
Continuous Position Colour12
pink
111-120
Continuous Position Colour13
dark blue
121-129
White
7
130-134
Colour1
orange
135-138
Colour2
magenta
139-143
Colour3
light green
144-147
Colour4
red
148-152
Colour5
aquamarine
153-157
Colour6
cyan
158-161
Colour7
lavender
162-166
Colour8
3200K
167-171
Colour9
light yellow
172-176
Colour10
deep green
177-180
Colour11
yellow
181-185
Colour12
pink
186-189
Colour13
dark blue
190-215
Forwards rainbow effect from fast to slow
216-218
No rotation
219-243
Backwards rainbow effect from slow to fast
244-249
No rotation
250-255
Auto random colour selection from fast to slow
Static Gobo
8
0-3
Open
4-9
Gobo 1
10-15
Gobo 2
16-21
Gobo 3
11

22-27
Gobo 4
28-33
Gobo 5
34-39
Gobo 6
40-45
Gobo 7
46-51
Gobo 8
52-57
Gobo 9
58-63
Gobo 10
64-69
Gobo 11
70-75
Gobo 12
76-81
Gobo 13
82-87
Gobo 14
88-93
Gobo 15
94-99
Gobo 16
100-105
Gobo 17
Shaking gobos from slow to fast
106-111
Gobo 1 shake slow to fast
112-116
Gobo 2 shake slow to fast
117-121
Gobo 3 shake slow to fast
122-126
Gobo 4 shake slow to fast
127-131
Gobo 5 shake slow to fast
132-136
Gobo 6 shake slow to fast
137-141
Gobo 7 shake slow to fast
142-146
Gobo 8 shake slow to fast
147-151
Gobo 9 shake slow to fast
152-156
Gobo 10 shake slow to fast
157-161
Gobo 11 shake slow to fast
162-166
Gobo 12 shake slow to fast
167-171
Gobo 13 shake slow to fast
172-176
Gobo 14 shake slow to fast
177-181
Gobo 15 shake slow to fast
182-186
Gobo 16 shake slow to fast
187-191
Gobo 17 shake slow to fast
192
Open/hole
193-223
Forwards gobo wheel rotation from fast to slow
224
No rotation
225-255
Backwards gobo wheel rotation from slow to fast
Rotating gobo wheel
0-3
Open
9
4-12
Gobo 1
13-21
Gobo 2
22-30
Gobo 3
31-39
Gobo 4
12

40-48
Gobo 5
49-57
Gobo 6
58-66
Gobo 7
67-75
Gobo 8
76-84
Gobo 9
85-93
Gobo 10
94-102
Gobo 11
103-111
Gobo 12
Shaking gobos from slow to fast
112-120
Gobo 1
121-129
Gobo 2
130-138
Gobo 3
139-147
Gobo 4
148-156
Gobo 5
157-165
Gobo 6
166-174
Gobo 7
175-183
Gobo 8
184-192
Gobo 9
193-201
Gobo 10
202-210
Gobo 11
211-219
Gobo 12
220
Open/hole
221-237
Forwards gobo wheel rotation from fast to slow
238
No rotation
239-255
Backwards gobo wheel rotation from slow to fast
Gobo Rot
0-3
Open/no rotation
10
4-131
Rotating position
132-192
Forwards gobo rotation from fast to slow
193-194
No rotation
195-255
Backwards gobo rotation from slow to fast
11
8 Facet Prism
0-128
Open
129-255
Prism indexing
12
24 Facet Rotating Prism
0-128
Open
129-255
Prism indexing
Prism Rot
13
0-128
Rotating position
129-190
Forwards gobo rotation from fast to slow
191-193
No rotation
194-255
Backwards gobo rotation from slow to fast
14
Frost
13

0-3
Open
4-179
Frost from 0% to 100%
180-189
100% frost
190-211
Pulse closing from slow to fast
212-233
Pulse opening from fast to slow
234-255
Ramping from fast to slow
15
Zoom
0-225
Zoom from min to max
16
Foscus
0-225
Continuous adjustment from far to near
Shutter/strobe
0-31
Shutter closed
32-63
Shutter open
64-95
Strobe-effect from slow to fast
17
96-127
Shutter open
128-143
Opening pulse in sequences from slow to fast
144-159
Closing pulse in sequences from slow to fast
160-191
Shutter open
192-223
Random strobe-effect from slow to fast
224-255
Shutter open
18
Dimmer intensity
0-255
Dimmer intensity from 0% to 100%
REMARK
The product has perfect performance and intergrity packing. All users should be
strictly comply with the warning and operating instructions as stated. Or we aren’t in
charge of any result by misusing.
Any damage resulting by misuse is not within the Company’s warranty.
Any fault or problem caused by neglecting the manual is also not in the charge of
dealers. Errors and omissions for every information given in this manual excepted. All
information is subject to change without prior notice
14