Brighter HexaPatt One User manual

User manual
Please read the instructions carefully before use
This
product
manual
contains
important
information
about
the
safe
installation
and
use
of
this
projector.
Please
read
and
follow
these
instructio
ns
carefully
and
keep
this
manual
in
a
safe
place
for
future
reference.
HexaPatt One
Vintage Retro Lamp with 3x60W Warm White LED modules

User manual
Please read this user manual before using this product
Contents
1.Safety Instruction ..................................................3
2.Function Menu.......................................................4
3.Function Operation ................................................7
4.Channel Function ..................................................11
5.Pixel Control ..........................................................12
6.Product Dimension Drawing...................................12
7.Technical Parameter .............................................13

Safety Notes
Note : To ensure reasonable consistency of operation, please read this instruction carefully.
Any damages caused by the non-observance of this manual or any unauthorized
modification to this product are not be subject to warranty .
1. This product belongs to high temperature products. Do not touch the lamp body when
working, carefully scalds!
2. Maintain a 50CM space at the back of the lamp body for dissipate heat.
3. When installing/replacing the lamp tube, turn off the lamp power!
4. This lamp is used for indoor lighting, not waterproof ! When lamp works, lamp tube at high
temperature.
5. Make sure the voltage and frequency of power supply match the power require of this
devise.
6. Please do not operate the equipment in the condition of wire damage or wear.
7. Do not remove any part of the equipment during the use of lamps.
8.Any unauthorized modification to this product are not be subject to warranty .

Function Menu
Address
Setting
001-512
DIMX
6CH/8CH/12CH
Red
0-255 Brightness 0-100%
Green
0-255 Brightness0-100%
Blue
0-255 Brightness0-100%
LED 1
0-255 Brightness0-100%
Manual
Test
LED 2
0-255 Brightness0-100%
LED 3
0-255 Brightness0-100%
Running
Mode
Dimmer
0-255 Brightness0-100%
Shutter
0-3 No Function

4-7 Dimmer
8-76 Synchronizing Strobe ,from
slow to fast
Menu
77-145 Pulse Strobe ,from slow to
fast
146-215 Random Strobe ,from slow
to fast
216-255 Dimmer
Program
Program Speed 001-009
Program Num 001-015
Sound
Screen
Yes/No

Reverse
Lamp Light Set
0-255
Advance
Setting
Language
CN/EN
Sound
Control
Sensitivity
0-100
Dimmer Speed
Fast/Slow
Dimming
Curve
LNR Linear
Dimmer
SIN
L1S
L2S
System
Information
V 2.0

Function Operation
Keys diagram
2.1 built-in program Automatic function
1. Select the working mode menu.
2. Select automatic mode.
3.Choose one of Fifteen programs.
4. Setting program speed.
2.2 manual mode function
The manual mode function is consistent with the Pixel control 12CH channel but in manual
mode DMX address is not working in that condition . The 12 sub-menus correspond to three
functions .

2.3 Sound control function
1. Select the working mode menu.
2. Select automatic mode. Because sound control is based on the automatic program, so
you need to choose the automatic program before you turn on the sound control .
3.Choose one of nine programs .
4. Select the working mode menu.
5. Select sound control mode.
6. Set the sound control sensitivity.From 16 to 255 sound control will not work.From 16 to
255 sound control will more and more sensitive .
Channel Function
DMX 512 function
1. Select the working mode menu.
2. Select DMX mode（6/8/12CH）.
3. Set to 1 channel mode.
4. Exit the working mode menu, select the DMX menu, and set the DMX menu address.
The DMX address can be set to 001.
6CH DMX general function
1. Select the working mode menu.
2. Select DMX mode.
3. Set to 6 channel mode.

4. Exit the working mode menu, select the DMX menu, and set the DMX menu address.
The DMX address can be set to 001
8CH DMX Pixel Control function
1. Select the working mode menu.
2. Select DMX mode.
3. Set to 8 channel mode.
4. Exit the working mode menu, select the DMX menu, and set the DMX menu address.
The DMX address can be set to 001.
Channel
Function
From
To
Feature
1
Red
0
No function
1
255
Red 1—100%
2
Green
0
No function
1
255
Green 1—100%
3
Blue
0
No function
1
255
Blue 1—100%
4
LAMP1
0
No function
1
255
Brightness 1—100%
5
LAMP2
0
No function
1
255
Brightness 1—100%
6
LAMP3
0
No function
1
255
Brightness 1—100%

Channel
Function
From
To
Feature
1
Red
0
No function
1
255
Red 1—100%
2
Green
0
No function
1
255
Green 1—100%
3
Blue
0
No function
1
255
Blue 1—100%
4
LAMP1
0
No function
1
255
Brightness 1—100%
5
LAMP2
0
No function
1
255
Brightness 1—100%
6
LAMP3
0
No function
1
255
Brightness 1—100%
7
Dimmer
0
255
Brightness 1—100%
8
Strobe
0
3
No function
4
7
Dimmer
8
76
Synchronizing strobe;
Strobe from slow to fast
77
145
Pulse strobe ;
Strobe from slow to fast
146
215
Random strobe ;
strobe from slow to fast
216
255
Dimmer