BRITISH RECYCLED PLASTIC TODMORDEN MKII User manual

FIX A-FRAMES TO TABLE TOP USING 70mm SCREWS
THROUGH PRE-DRILLED HOLES IN FIXING BARS
BEFORE FULLY TIGHTENING ALL SCREWS CHECK THAT
THE PICNIC TABLE IS SQUARE BY MEASURING ACROSS
THE DIAGONALS
F
4 no
E
4 no
E
4 no
E
12 no
E
4 no
E
4 no
F
4 no
E
12 no
E
12 no
F
4 no
IMPORTANT! - ONLY SCREW
HALFWAY IN AT THIS STAGE
& FULLY TIGHTEN WHEN
SEATS ARE TO BE FIXED
B
C
B
ENSURE END A-FRAMES HAVE
THE SEAT FIXING BLOCKS
FACING INWARDS AS SHOWN
BEGIN ASSEMBLY WITH TABLE TOP
TURNED UPSIDE DOWN
A
PARTS LIST - 2 PERSON ASSEMBLY:-
A PRE-ASSEMBLED TABLE TOP 1 no.
B END A-FRAME 2 no.
C MIDDLE A-FRAME 1 no.
D PRE-ASSEMBLED SEAT 2 no.
E 70mm BRASS SCREWS 52 no.
F 70mm S/STEEL SCREWS 28 no.
TOOLS:-
POWER DRILL WITH PHILIPS-HEAD BIT
MEASURING TAPE & STRAIGHT EDGE
B
TODMORDEN PICNIC TABLE:
Assembly Guide - 1 of 2.
TODMORDEN MKII
IMPORTANT:-
Ensure that you are familiar with these assembly
instructions prior to commencing assembly.
We will not accept any claims resulting from
products that have been wrongly assembled.
Employ safe lifting procedures when handling
components.
22/05/2019
Registered Office: Unit 8C, Top Land Country Business Park,
Cragg Road, Mytholmroyd, West Yorkshire, HX7 5RW
Freephone: 0808 281 2929 - E-mail: [email protected]

BEFORE FULLY TIGHTENING ALL SCREWS
CHECK THAT THE SEATS ARE SQUARE
IMPORTANT - ENSURE THAT THE 16 no BRASS SEAT
FIXING SCREWS ARE NOW FULLY TIGHTENED - THESE
ARE SHOWN ON PAGE 1 OF 2
ENSURE CHAMFERED ENDS OF
THE SEAT FIXING BLOCKS ARE
FACING OUTWARDS AS SHOWN
F
2 no
F
4 no
F
2 no
TURN PICNIC TABLE OVER ONTO FEET
& FIX PRE-ASSEMBLED SEATS USING 70mm
SCREWS THROUGH PRE-DRILLED HOES
IN SEAT FIXING BLOCKS
F
2 no
F
4 no
F
2 no
D
D
TOOLS:-
POWER DRILL WITH PHILIPS-HEAD BIT
MEASURING TAPE & STRAIGHT EDGE
B
TODMORDEN PICNIC TABLE:
Assembly Guide - 2 of 2.
TODMORDEN MKII
IMPORTANT:-
Ensure that you are familiar with these assembly
instructions prior to commencing assembly.
We will not accept any claims resulting from
products that have been wrongly assembled.
Employ safe lifting procedures when handling
components.
22/05/2019
Registered Office: Unit 8C, Top Land Country Business Park,
Cragg Road, Mytholmroyd, West Yorkshire, HX7 5RW
Freephone: 0808 281 2929 - E-mail: [email protected]