Britz Airborne User manual

Airborne
compatible with Stereo
Bluetooth Device
The nation's first
2HC bluetooth speaker
SMART READY USER MANUAL
Please use it for its original purpose after reading its instruction for your safety
Product size/appearance written in instruction can be changed without any notice for quality
improvement.
This product is produced for 220V exclusive. It is advised to use carefully.
Product component and names for each part
[Speaker front] [Speaker side] [Speaker
back part]
2
① Tweeter Unit : High note output
② Mid-Range Unit : Middle/low note output
③ Treble Volume Knob : High note volume control
④ Power On/Off, Main Volume Knob : Power supply on/off, main volume control
⑤ Bass Volume Knob : Low note volume control
⑥ Fabric Mesh Cover : Mid-range unit protection
⑦ LED Indicator : Power supply/Indicate mode condition
⑧ Mode Selector : Bluetooth / Aux mode setting
⑨ Headphone Connecting Socket : Headset terminal connection
⑩ Aux Connecting Soket : Aux terminal connection
⑪ Air-Duct : Air ventilation/ventilation duct
⑫ Wall Mount Hole : Wall-hanging
⑬ Clip Spring Terminal : Clip terminal
⑭ Power Cable : Power wires
① Manual : Instruction manual
② Clip Type Cable : Connection cable between speakers
③ Stereo Cable : Aux input cable
[Extra component]
[Extra component]
*Product warranty
included

Speaker connection method
4
Speaker connection method
3
[environment
setting]
[Click setting] [Click general]
[Slide it towards arrow to operate bluetooth]
[Click BRITZ-V01]
[Connected]
[Bluetooth start working
and equipment search]
[Click bluetooth menu]
[Wireless/network]
[Bluetooth check] [Device check]
[Click BRITZ -V01]
[Connected]
[Click connection]
※If asked for password, insert
"0000"
※connected in pair :
genuine Korean word for
bluetooth connected
※If asked for password, insert
"0000"
[Bluetooth setting]
1. To connect with Bluetooth ex)apple I phone, I pad
Very first pairing
Power on by turn POWER ON/OFF KNOB to right at front body after turning
on speaker's power.
Press mode setting button to play bluetooth mode on side
part of main speaker which will start pairing automatically
※Mode condition check
_BLUETOOTH L: LED flicker continuously
_AUX: continuously light on
Equipment search after setting it on bluetooth mode from your connecting
device(smart phone,lap top, PMP etc.)
a.Equipment search using Smart phone,tablet PC, PMP and ETC
ex) Samsung Galaxy
b.Equipment search at desk top,lap top and ETC
[Click BRITZ-V01 again]
[Bluetooth set up window]
[Quick menu at right
bottom on window screen]
Double-click

c. To reconnect/disconnect with pairing device
d. Bluetooth FAQ
Double-click
: connection fail
: connected
Speaker connection method
6
Speaker connection method
5
[Practice new connection adding wizard] [Equipment search]
[Clear completed condition]
[Connection completed]
[Select equipment]
[Register device and connection completed]
④ Play and enjoy music file/video from device program you wanted
[Insert password]
BRITZ-V01
BRITZ-V01
Click next
Click next Click confirm
Input ‘0000’
Check
② To reconnect with pairing device
a. First, to allow speaker to operate and turn right POWER ON/OFF KNOB at
front body then press setting mode during POWER ON in order to change
its mode to bluetooth.
Tip. Airborne standard mode sets on AUX mode
b. Revitalize bluetooth with pairing connecting device, then click "BRITZ-V01"
from device inventory to be connected.
c. Play and enjoy music, video, game file from connecting device program
① To reconnect bluetooth connection
Click “BRITZ-V01” from bluetooth device inventory to disconnect bluetooth.
_ It may not operate properly in case version of bluetooth signal transmitter is lower
than transmitter.
_ It may not compatible with some of built in profile supported with window7 64bit
OS since manufacture does not support some of it.
→ Above issue can be resolved using bluetooth dongle or bluetooth set up program.
_ Sound source may not come out properly with application/program which does
not support bluetooth
_ Maximum reception distance for bluetooth is 15m (some can support up to 25m)
and stable reception distance is 8m
※ Deviation is possible according to different surroundings and condition of
bluetooth signal transmitter.
_ This product adopted with 1:1 communication method, does not compatible with
multi-pairing.
_ Head set terminal outputs its original sound adopting bypass method.
→Available to output sound source from connecting device when it is off
→Volume control at device/application/program
_ Bluetooth dongle enables to connect with transmitter not compatible with bluetooth

Speaker connection method
7
To connect with left/right speaker
① Connect left/right speakers through enclosed Clip Type Cable.
2. To connect with AUX/Head set
Connect with AUX
① To allow speaker to operate and turn right
POWER ON/OFF KNOB at front body in
order to POWER ON
② Connect AUX connection terminal to
sound output terminal at connecting
device using enclosed stereo cable
③ Press mode set up button in order to
convert into AUX mode (when set up AUX
mode, LED will stay up on its ON condition)
④ Play and enjoy music/video/game file from
connecting device program
When connected with head set
① To allow speaker to operate and turn right
POWER ON/OFF KNOB at front body in
order to POWER ON
② Connect sound input cable to the side
head set terminal at main speaker
③ Play and enjoy music/video/game file from
connecting device program