Brizo SmartTouch VoiceIQ EP100854 User manual

Brizo Voice Activation Technology allows you to dispense the exact amount of water you
need, completely hands-free. Just command your faucet to turn on and off, warm the water,
dispense a metered amount or create custom container amounts–luxury answers to you.
COMMAND THE ROOM

MATERIALS REQUIRED
For more product details, installation assistance and other helpful information, visit
brizo.com/voiceactivation.
These instructions begin with an installed Brizo SmartTouch®faucet*. If you have not
installed your faucet yet, please follow the instructions for faucet installation prior to
installing your Brizo VoiceIQ™ Module. You will also need a smartphone or tablet and
the following to complete the set-up:
A POWER SOURCE
Under the sink.
Not controlled by a switch.
A CONNECTED
HOME DEVICE
Amazon®Alexa®or
Google®Assistant.
A HOME WI-FI SYSTEM
And your login
information.
Before you begin, remove the batteries from your SmartTouch®solenoid.
*manufactured after 01/01/18

INSTALLATION INSTRUCTIONS
STEP 1.
Turn off your water supply.
STEP 2.
Remove the plastic clip from the
bottom of your existing solenoid.

STEP 3.
Remove the existing hose by
gently pulling it downward.
STEP 4.
Slide the new VoiceIQ™ Module unit
onto the bottom of your existing
solenoid.

STEP 5.
Swivel the retainer clip upward
and click it into place.
STEP 6.
Slide the hose onto the VoiceIQ™
Module and secure it with the
retaining clip.

STEP 7.
Connect the ethernet cable to the
voice module and the existing
solenoid.
STEP 8.
Connect the power supply to the solenoid and
to an outlet that is not controlled by a switch.
Reinstall SmartTouch®solenoid batteries* and
turn on water supply.
* in case of power outage, touch activation will revert to battery power.

104181 Rev. A 03/12/2019

INSTALLATION INSTRUCTIONS (CON’T)
Connect your Smartphone or tablet to your VoiceIQ™ Module’s Wi-Fi
signal, “BRIZO-ABC”. Your VoiceIQ™ Module will have a unique identifier
in the name of the Wi-Fi connection, shown here as “ABC”
Open a browser and enter the URL 10.10.10.1 for product setup. Follow
the steps on screen.
Bookmark device.brizo.com for easy access to the Web app, where you
can see settings, FAQs and a list of voice commands.

VOICEIQ™MODULE LED COLOR INDICATORS
BLINKING GREEN
Wi-Fi setup mode: indicates the VoiceIQ™ Module is trying to connect to Wi-Fi.
If blinking continues for more than 3 minutes, you may need to reconnect it to
your home Wi-Fi.
BLINKING RED
Indicates that the required AC power is not connected
(blinks once every 5 seconds).
SOLID GREEN
Indicates a successful connection to the Wi-Fi.
SOLID RED
Indicates an interrupted or failed connection.
This light can be found on your VoiceIQ™ Module under the sink, not at the faucet base.

TROUBLESHOOTING TIPS
If your VoiceIQ™ Module is blinking a red light every 5 seconds, this indicates an
issue with the power supply. Verify that the outlet you’ve plugged your module into
isn’t connected to your garbage disposal switch by plugging something else into the
outlet (lamps and other lights work best, but anything that lights up or makes noise
and doesn’t have a backup battery will work), then switching your garbage disposal
on and off. If the item plugged into the outlet only works with the garbage disposal
switched on, your outlet is connected to your garbage disposal and isn’t compatible
with your VoiceIQ™ Module.
If you can’t locate BRIZO-ABC on your list of available Wi-Fi networks, check for a
flashing green light on your VoiceIQ™ Module under the sink. If the light is blinking
green, re-scan for Wi-Fi networks on your mobile device. If the light is blinking red,
see the above troubleshooting tip about power supply.
If the VoiceIQ™ Module setup page fails to load on your mobile device after entering
10.10.10.1, check the following:
A. If the LED light on your VoiceIQ™ Module is blinking green, it’s still in Wi-Fi setup
mode. Re-scan for Wi-Fi networks on your mobile device and connect to
“Brizo-ABC” (“ABC” is used here to mark your module’s unique identifier code).
B. If the LED light on your VoiceIQ™ Module is blinking red, it isn’t connected to a
power source. See the first troubleshooting tip, above.
C. Turn off cellular data on your mobile device, but leave Wi-Fi on, then refresh
the webpage.

TROUBLESHOOTING TIPS (CON’T)
CONTINUOUS SUPPORT
For warranty information visit
www.brizo.com/customer-support/warranty-and-returns
If device fails to connect after entering Wi-Fi network name and password and the
LED on voice module is solid red, check the following:
A. Double check that the password for your VoiceIQ™ Module’s Wi-Fi was
entered correctly.
B. The VoiceIQ™ Module works with 2.4 GHz Wi-Fi. If your router has both 2.4 GHz
and 5.0 GHz, please make sure you use 2.4 GHz. When scanning for Wi-Fi networks
on your mobile device, only the 2.4 GHz network will appear.
We’re here to help. You’ll find a full list of frequently asked questions at
device.brizo.com. You’re also welcome to call our customer solutions line
at 833-297-8482.
The VoiceIQ™ Module is designed to work with Brizo SmartTouch®Faucets
manufactured after 01/01/2018.

VOICE ACTIVATION
by