BRONZE GYM A9 Series User manual

A9 SERIES -020A USE MANUAL
SMITH MACHINE
http://bronze-gym.ru/bronze-gym-a9-020a-mashina-smita-s-naklonom

1
CONTENT
IMPORTANT DECLARATION………………………………………..1
WARNING………………………………………………………………..2
USE INSTRUCTION……………………………………………………..3
REGULAR MAINTENANCE…………………………………………....4
EXPLODED PICTURE…………………………………………………...5
ASSMBLE STEP…………………………………………………………..6
IMPORTANT DECLARATION:
First we are highly appreciated that you buy A9-020A SMITH
MACHINE.
For your health and safe, before you exercise please consult from your
doctor and define a appreciated exercise burden for yourself. Before using this
equipment read carefully all related instructions and notice. In this way you gain
more happiness during exercise. When you begin to use A9-020A SMITH
MACHINE , our company think you have read use manual already.
After you buy this equipment, please fill carefully ‘post-sale service
warranty card’ and keep it, meanwhile, post return receipt (stub) back to our
company so that we provide better service for you.
This manual is the first edition 2011 of series products A9-020A SMITH
MACHINE The content of manual will change along with promotion of products,
and we will not inform you.
All notice and instruction are in order to keep yoafe and use this
equipment correctly. If not obeying the suggestion, take the consequence yourself.
After reading, the user must keep this manual in the place you can see it at
anytime.
PRODUCTS INTRODUCTION:
1 The main frame adopts the high-quality steel tube of for use, durable and safe.
2 Adopt high strength steel cable as transmitting wire and you will feel safe and
durable.
3 The weight stack adopts casting iron and has protective cover.
4Rotating part adopts the high-quality bearing, durable in use and there is no
noise while using.
5The high quality leader makes it smoother while using.

2
WARNING
1. This training equipment is only intended for use in training areasof organizations
such as sport associations, educational establishment, hotels, clubs and studios,
where access and control is specifically regulated by the owner (person who has the
legal responsibility).
2. The training equipment shall only be used in areas where access control is specifically
regulated by the owner; the extent of control depends on the users,
e.g. degree of reliability, age, experience, etc.
3. The training equipment shall only be used in supervised areas.
4. Always keep unsupervised children and disabled away from the equipment.
5. Injury to health may result from incorrect or excessive training, please consult the
couch to choice correct exercise method and proper burden.
6. Please adjust the load and equipment further (e.g. seat adjustment) before using.
7. Please check if the bolt and handrail are out of work before you start to use it.
8. When weight stacks, booms and other parts of this equipment are blocked, must
handle with other people’s assistance, in case that the weight stacks may suddenly
drop and cause accident.
9 .Adjust the length of the steel cable properly and never make the steel wire rope
twist. After using the machine for a period, the owner shall check the steel cable to
make sure no unusual phenomena in connecting. When meet any problems, please
consult the professional maintenance personal at once.
10. Do not suddenly drop the weight stack. In order to avoid destroying other weight
stacks, please raise it when the weight stacks nearly collide.
11. While using, forbid hands stretching into the weight stacks or the relative motion
parts, so as not to injure the finger.
12. Never allow person with heart disease and children under 12 to use this
equipment.
13.The training equipment is in compliance with EN 957-2 class S(S=studio);
14.The max training weight is 150kgs (330pound). The max user’s body weight is
150kg (330pound).
15.The machine should be located stably. A space of 2000mm*2000mm should be
around the machine。
16.The scope of products: Primary use in professional fitness club.The second is the
residence community，gym of some company
17. If you feel swirl, surfeit and other discomfort sense, Please stop exercising and go
for doctor.
18. The equipment should be installed on stable even surface.
19. The machine shall only be used indoor and be avoid of moisture.
20. Wear right shoes and coat
21. Warm up before exercising
22. Don’t use the equipment to do the impossible function
23. Please exercise under instruction by professional coach.
24. Inspect if the equipment is fastness before using
25. Any of the adjustment devices that could interfere with the user movement
should not be left projecting.

3
USE INSTRUCTION:
A9-020ASMITH MACHINE
Exercise position: Pectorals, Shoulder Muscles, Triceps muscle group
Dimension: 2500mm (L)*1730mm(W)*2390 mm(H) weight : 235kg
Use Instruction:
1Read all caution Warning Labels before using this equipment.
2Adjust seat pad and sit with your back firmly against back pad.
3Insert pin into weight stack at desired resistance level.
4Hold the lever firmly, securely position both hands in an overhand grip or with
palms facing each other.
5Keeping your arms close to your sides, slowly push forward while maintaining a
smooth, comfortable exercise movement.
6Parse for a moment, then slowly return to the start position and repeat the
movement.
NOTICE:
1.Warm-up…..It needs warm-up for 5-10 minutes before starting exercise, for
instance mark time, free-standing exercises etc., in order to move each
joint muscle, so as not to injure the joint muscle while exercising.
2 Diet ………Eat some more protein, vegetables, and fruit. Begin to do exercises until
40 minutes after a meal. Taking food until half an hour after doing
exercises and drink little water while doing exercise.
3.Breath….….Breathe in while exerting oneself, exhale while relaxing. To coordinate
breathe with movement.
4 Frequency…It needs to take a rest over 48 hours before exercising the same muscle.
5 Burden…….Exerciser should choose suitable weight according to one's own actual
conditions, make sure not to be overweight, so as not to cause the
muscle to draw wounded. Exercises should according to the
progressive principle; it is normal to feel ache while exercise for the
first time.

4
REGULAR MAINTENANCE
1．The safety level of the equipment can be maintained only if it is examined
regularly for damage and wear, e.g. ropes, pulleys, connection points;
2．Pay special attention to components most susceptible to wear.
3．Replace defective components immediately and /or keep t he equipment out
of use until repair;
4．This equipment should carry on regular maintenance according to the
following chart:
INSTALL SKETCH MAP
Let assembly become easier
All the content of user’s manual is to assured the strength training machine can be
installed more easily
Reading the details and instructions before installing:
1．Because the size and weight of equipment is so large, Please choose the installed
place near the desired station and assured there is enough space to exercise
2．All parts can be put on the clear area, then backout the wrapper. And the wrapper
can’t be through away before installation finished.
3．Screw the bolt tightly except the additional instruction
4．All parts must be installed according the illustration indication.
5．Installation work can be finished by tow men
6．Identify all parts by part identify chart
MAINTENANCE
EVERYDAY
EVERY WEEK
THREE MONTHS
Check: connecting, bolt,
Weight stack bolt
√
Clearance:
cushion and cover
√
Lubrication:
place of sliding
√
Check:
bolt if tighten
√
Lubrication:
Bracket of bearing
√

5
Exploded Picture
4-C11
4-M13
4-M05
C23
C19
C17 C20
C19
C17 C21
C23
C20
C21
5-C62 5-C10
C22
C17
5-C62
5-C10
C22
C17
4-C12
4-C14
4-C14
4-C12
C17
M16
M16
4-C10
4-C42
AE1
8-C42
8-C10
2-AE1
AC1
2-AH3
2-M71
2-C17
2-AH4
2-N08
2-C68
2-AH1
2-M68
2-C66
2-C69
2-C69
2-C66
C17
2-C67
2-C17 2-AH2
H11
2-C72
C19
C17
C19
C17
2-C65
2-C17
2-C17
2-C70
2-C65
2-D103
4-B35
4-C63
4-C12
4-C12
4-C14

6
Assmble Step：
Use tool：
1. M6 Hex spanner
2. M10 Hex spanner
3. Two 13-16 spanner
4. Two 17-19 spanner

7
AC1
AC1
step 1
N0. Description SPEC. QTY.
AC1 Main frame welding group
of Smith Machine 2
AE1 Connect support welding
group
C1O Flat gasket
C17 Inner hexagon
fillisterhead screw
C42 Outer hexagon bolt
M24 gasket
3
12
∮13.5*∮24*2.5t
M8*1.25P-15L 4
12
4
M12*1.75P-20L
82*142
4-C10
4-C42
AE1
4-C10
4-C42
AE1
4-C10
4-C42
AE1
4-M24 4-C17

8
4-C14
4-C12
step 2 C11
C12 C14
M13
M05
Barrel
∮11*∮20*2t
∮16*215L 8
8
M10*1.5P
Locknut 8
Foam barrel
A9-40 8
8
A9-006
N0. Description SPEC. QTY.
Flat gasket
8-C11
8-M13
8-M05
4-C12
4-C14

9
2-C17
2-AH2
H11
2-C72
2-C65
2-C17
2-AH3
2-C10
2-H17
step 3 AH2
AH3 C10 C17
C65
2
2
2
6
2
C72
H11
H17
M71
∮13.5*∮24*2.5t
Hook rack welding group
M8*1.25P-15L
Fastening screw M8*1.25P-8L
2
Embossing Bearing ∮30*2420L 1
Inner hexagon
fillisterhead screw M12*1.75P-30L 2
Bearing end cover ¡Ó 2
∮45*∮35*26L
N0. Description SPEC. QTY.
Hook rack welding group
Flat gasket
Inner hexagon
fillisterhead screw
Smith shelves collar
2-AH3
2-M71
2-C17
2-N08
2-M68