Brookstone DUAL SMART PLUG User manual

USER MANUAL
For more products please visit www.brookstone.com
DUAL SMART PLUG
FCC ID: 2ANJP-AWP12L

For more products please visit www.brookstone.com
FCC Statement:
1. This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Caution: The user is cautioned that changes or modifications not
expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
2. This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20cm between
the radiator and any part of your body.

For more products please visit www.brookstone.com
SPECIFICATIONS
Model: BKSPDUAL
Size:100x45x45mm
Input Voltage: AC 100-240V 50/60Hz
Rated Current: 10A
Rated Power: 1200W
Wi-Fi Standard: 2.4GHz 802.11b/g/n
System Support: Android/iOS
WARRANTY INFORMATION
One Year Limited Warranty.
Customer Service Number: 732-994-2301
©Smartpoint LLC,
250 Liberty Street, Suite 1A
Metuchen, NJ 08840
The BROOKSTONE trademark. names and logos are owned by
BKST Brand Holdings LLC ©2019. All rights reserved.
Manufactured, marketed and distributed by Smartpoint LLC, under license.
Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
Google and Google Play are trademarks of Google LLC.
App Store
®
is a registered trademark of Apple, Inc.
All trademarks and registered trademarks are property of their respective owners.
Made in China

FEATURES
• Wi-Fi remote controlled
• Programmable with Schedule
• App and Voice Control
• Energy monitoring
• Works with Amazon Alexa and
the Google Assistant

PRODUCTCONFIGURATION
On/Off Button
(one on each side)
Power Socket 1
Power Socket 2
Indicator Light
Prongs
• White light: Power on
• Light off: Power off
• Blue light / Blue and White rapidly blinking: Wi-Fi Connect
• Blue light / Blue and White slowly blinking: AP Mode

DOWNLOAD APP
Brookstone Smart
1. Android: download “Brookstone Smart” app
on GooglePlay.
2. iPhone: download “Brookstone Smart” app
from the App Store.

REGISTRATION AND LOGIN
1. Run the “Brookstone Smart” app from your
smart phone.
2. Register and login.

1. Plug in Dual Smart Plug into electrical
socket. Wait 3-5 seconds and lights will start
blinking white and blue rapidly.
2. Make sure phone is connected to your Wi-Fi
network and that it is a 2.4GHz network.
3. Press the (+) symbol in the top right corner of
the app and select the Smart Plug from
the list of devices to add.
ADD DEVICE

1. Plug in Dual Smart Plug into electrical
socket. Wait 3-5 seconds and lights will start
blinking white and blue rapidly.
2. Make sure phone is connected to your Wi-Fi
network and that it is a 2.4GHz network.
3. Press the (+) symbol in the top right corner of
the app and select the Smart Plug from
the list of devices to add.
5. Make sure phone is connected to the Wi-Fi
network that the device will be connected to.
Enter your password for the Wi-Fi network.
4. Confirm indicator light is blinking and press
the “confirm indicator rapidly blinks” button.

6. Connecting process will begin. Do not turn off
Dual Smart Plug or phone while connecting.
Wait for connection process to complete.
7. Once device has been successfully added, name
the device what you would like it to be called in
the app. The Dual Smart Plug is ready for use.
5. Make sure phone is connected to the Wi-Fi
network that the device will be connected to.
Enter your password for the Wi-Fi network.
4. Confirm indicator light is blinking and press
the “confirm indicator rapidly blinks” button.

PUSH NOTIFICATIONS
1. You can turn on/off notifications for all devices
connected to app by clicking on the “Me” button at the
bottom right of the screen.
2. Then click on ”Settings” button. From there you can turn
on/off all notifications.

CONTROLLING DUAL SMART PLUG
1. From the home screen of your app click on Dual Smart
Plug. On the next screen you can independently
control both outlets of the plug or the whole dual plug
all together.
2. You can also create separate schedules for each outlet
of the plug. Click on the schedule button near the top
and then you will see that you can click on each
individual outlet of the plug. After that click on “add
schedule” at the bottom.
power
control set schedule

MONITORING ENERGY USAGE
1. From the home screen of your app click on Dual Smart
Plug. Next, click on the electricity symbol at the top
right.
2. On the next screen you will be able to view your energy
usage of the plug in total and month by month.

REMOVE A DEVICE
1. From the home screen, click on the device you would like
to remove.
2. Then click on the edit symbol on the top right of the
screen.
3. From there you would then click the “Remove Device”
button at the bottom of the screen.

1. From the home screen, click on the device you would like
to remove.
2. Then click on the edit symbol on the top right of the
screen.
3. From there you would then click the “Remove Device”
button at the bottom of the screen.
How to control the Smart Plug with Amazon Alexa
Please make sure that your Alexa app is
connected to your Amazon Echo and both
work together successfully on your Wi-Fi
home network.
Step A. Log into your Alexa app, tap top left
corner, and tap “Skills”.

Step E. Wait a few seconds for Alexa to detect the Dual Smart
Plug from the Brookstone Smart app and you will find the device
named “Dual Smart Plug” has been paired to Alexa app from
“Brookstone Smart” app.
Since color Dual Smart Plug has two outlets, the device will show
as three devices. One for the plug as a whole and one for each
of the outlets. This way they can be named three different
names and be controlled separately.
When you click on a device you can then name them what you
choose.
Step D. Once your Brookstone Smart account is successfully
linked to Alexa, the next page will pop up. Tap ”Done” on the
top left corner, then tap “Discover Devices” on the next page.
Step B. Type “Brookstone Smart”, find “Brookstone Smart”
app in the search results and tap “enable” button.
Step C. Enter your account info for the “Brookstone
Smart” app, tap “Link Now”, then tap “Authorize” on the
next page to link Brookstone Smart account to Alexa.

Step E. Wait a few seconds for Alexa to detect the Dual Smart
Plug from the Brookstone Smart app and you will find the device
named “Dual Smart Plug” has been paired to Alexa app from
“Brookstone Smart” app.
Since color Dual Smart Plug has two outlets, the device will show
as three devices. One for the plug as a whole and one for each
of the outlets. This way they can be named three different
names and be controlled separately.
When you click on a device you can then name them what you
choose.

Step E. Wait a few seconds for Alexa to detect the Dual Smart
Plug from the Brookstone Smart app and you will find the device
named “Dual Smart Plug” has been paired to Alexa app from
“Brookstone Smart” app.
Since color Dual Smart Plug has two outlets, the device will show
as three devices. One for the plug as a whole and one for each
of the outlets. This way they can be named three different
names and be controlled separately.
When you click on a device you can then name them what you
choose.
After Step E is done, you can now control the Dual Smart Plug
with Alexa app from the devices page.
Step F. Now you are able to control the Dual Smart Plug
via Amazon Alexa. Any device plugged into the plug will
turn on and off with Alexa.
Try these commands and see what happens by
asking Alexa:
• Alexa, turn on “device name”
• Alexa, turn off “device name”
Note: The device name is the one you give to the
smart plug on “Brookstone Smart” app. You can also
rename the plug in the Alexa app. Let’s name the outlets
on the plug ”Switch 1” and “Switch 2”.
For example, now you can say:
• “Alexa, turn on Switch 1”,
• “Alexa, turn on Switch 2”, etc.
If you also want to control the Dual Smart Plug with the
Google Assistant, please read the next page.
How to control the Smart Plug with the Google Assistant

How to control the Smart Plug with the Google Assistant
1. Pair Dual Smart Plug with Brookstone Smart
App and name it with an easily recognizable
name.
2. Download the Google Home App and
register and log in with your Google
account info.
3. Finish setting up the Google Assistant.
Step A. Once you are logged into your Google Home App, you
should see buttons at the top to connect your Brookstone
Smart account to the Google Home App.
Step B. Tap the Brookstone Smart button to link your
account with the Google Assistant.

How to control the Smart Plug with the Google Assistant
1. Pair Dual Smart Plug with Brookstone Smart
App and name it with an easily recognizable
name.
2. Download the Google Home App and
register and log in with your Google
account info.
3. Finish setting up the Google Assistant.
Step C. Enter your account info for the “Brookstone Smart”
app, tap “Link now”, then tap “Authorize” on the next
page to link your Brookstone Smart account to the Google
Assistant.