Brookstone Single Watch Winder User manual


Watch Winder

1

Location of Controls 2
Setting your Watch Winder 3
Daily Operation4
Resetting the Timer4
Care and Maintenance                                                       4
Warnings and Cautions5-8
Warranty 9-10

2

1
2
3
4
Main Housing Lid
On/Off Button (2)
Directional Switch (2)
1
2
3
TPD (Turns Per Day) Switch (2)
Watch Cushion and Mount (2)
Main Housing
4
5
6
5
6


    
    

   
   
    
    

   
   
   
   

  
  
    
    

   
   

3

The two ON/OFF BUTTONS control the power of each WATCH MOUNT separately
The two three-position DIRECTIONAL SWITCHES control the direction of winding:
 I Clockwise
 0 Counterclockwise
 II Automatic Bidirectional
The two four-position TPD (Turns Per Day) SWITCHES control the watch winding
sequences Please see sequence chart below
Note: All switches in the down position while the main power is ON will result in
constant motion

4

Plug Adapter into connection on the bottom of the unit, being careful not
to scratch the finish as you turn the unit over, and plug into wall outlet
Pull WATCH CUSHION off WATCH MOUNT
Affix watch around WATCH MOUNT with the watch face on top and
secure with WATCH CUSHION
Choose desired direction from the list on page 3 and adjust the DIRECTIONAL
SWITCH accordingly
Choose desired sequence and adjust the TPD SWITCH accordingly


6 Turn power on with the ON/OFF BUTTON
7 Repeat steps 2 through 6 for the second WATCH MOUNT to wind an
additional timepiece
 Do not insert or remove any watch while mechanism is turning

To reset the timer, switch the power off then unplug the Adapter from the back of the
winder for 3 seconds Insert Adapter back into winder and switch the power on

Wipe with a soft, dry cloth Do not use abrasive cleaning agents
1
2
3
4
5

5

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
THERE ARE NO SERVICEABLE PARTS INSIDE
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE
The lightning ash with arrow-head symbol within an equilateral
triangle is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the unit’s enclosure that may be of
sufcient magnitude to constitute a risk of electric shock
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the unit

All the safety and operating instructions should be read, adhered to and followed
before the unit is operated
•
•

6

To reduce the risk of electric shock, burns, fire or injury:
Always unplug the unit from the electrical outlet immediately after using
Do not use while bathing or in a shower
Do not place or store unit where it can fall or be pulled into a tub or sink
Do not place in or drop into water or other liquid
Do not reach for unit that has fallen into water Unplug it immediately
Care should be taken so that objects do not fall and liquids are not
spilled onto the unit
•
•
•
•
•
•

7

Close supervision is necessary when this unit is used by or near children
Use this unit only for its intended use as described in this manual
Unplug this unit during lightning storms or when unused for long periods
of time
Never drop or insert an object into any opening
Protect the power cord from being walked on or pinched, particularly at plug
outlets, convenience receptacles and the point where it exits the unit
Do not allow cord to touch hot surfaces Wrap cord loosely around the unit
when storing
The unit should be situated away from direct sunlight or heat sources such
as radiators, electric heaters, heat registers, stoves, or other units (including
amplifiers) that produce heat Avoid placing on top of stereo equipment that
radiates heat
Never block the air openings of the unit with materials such as clothing, plastic
bags or papers, or place it on a soft surface such as a bed or couch, where the
air openings may be blocked
Do not overload electrical outlet Use only the power source as indicated
Do not carry this unit by cord or use cord as handle
1
2
3
4
5
6
7
8
9
10

8
Never operate this unit if it has a damaged cord or plug, if it is not working
properly, or if it has been dropped or damaged, or dropped into water
If the unit’s power supply cord or plug is damaged, do not attempt to fix
it yourself
To avoid the risk of electric shock, do not disassemble or attempt to repair the
unit Incorrect repair can cause risk of electric shock or injury to persons when
unit is used
Do not operate in the presence of explosive and/or flammable fumes
11
12
13


Brookstone® warrants this product against defects in materials and/or workmanship
under normal use for a period of ONE (1) YEAR from the date of purchase by the
original purchaser (“Warranty Period”) If a defect arises and a valid claim is received
within the Warranty Period, at its option, Brookstone will either 1) repair the defect
at no charge, using new or refurbished replacement parts, or 2) replace the product
with a new product that is at least functionally equivalent to the original product, or
3) provide a store credit in the amount of the purchase price of the original product
A replacement product or part, including a user-installable part installed in accordance
with instructions provided by Brookstone, assumes the remaining warranty of the
original product When a product or part is exchanged, any replacement item becomes
your property and the replaced item becomes Brookstone’s property When a store
credit is given, the original product must be returned to Brookstone and becomes
Brookstone’s property
 To obtain warranty service, call Brookstone Limited Warranty Service at
1-800-292-9819 Please be prepared to describe the product that needs service and
the nature of the problem A purchase receipt is required All repairs and replacements
must be authorized in advance Service options, parts availability and response times
will vary You are responsible for delivery and the cost of delivery of the product or any
parts to the authorized service center for replacement, per our instructions
 Coverage under this Limited Warranty is limited to the United
States of America, including the District of Columbia and the US Territories of
Guam, Puerto Rico, and the US Virgin Islands This Limited Warranty applies only
to products manufactured for Brookstone that can be identified by the “Brookstone”
trademark, trade name, or logo affixed to them or their packaging The Limited
Warranty does not apply to any non-Brookstone products Manufacturers or
suppliers other than Brookstone may provide their own warranties to the purchaser,
9

but Brookstone, in so far as permitted by law, provides these products “as is”
This warranty does not apply to: a) damage caused by failure to follow instructions
relating to product’s use or the installation of components; b) damage caused by
accident, abuse, misuse, fire, floods, earthquake or other external causes; c) damage
caused by service performed by anyone who is not a representative of Brookstone;
d) accessories used in conjunction with a covered product; e) a product or part
that has been modified to alter functionality or capability; f) items intended to be
periodically replaced by the purchaser during the normal life of the product including,
without limitation, batteries or light bulbs; g) any product sold “as is” including, without
limitation, floor demonstration models and refurbished items; or h) a product that is
used commercially or for a commercial purpose

         


     
       
       

          

Some states disallow the exclusion or limitation of incidental or consequential damages
or how long an implied warranty lasts, so the above exclusions or limitations may not
apply to you This warranty gives you specific legal rights and you may also have other
rights, which vary from state to state
10

615096
Merrimack, New Hampshire USA 03054 • 800-846-3000 • wwwBrookstonecom