Brother DCP-1610W User manual

Unpack the machine and check the components
Read the Product Safety Guide first, then read this Quick Setup Guide for the
correct installation procedure.
NOTE:
•The components included in the box and the AC power plug may differ
depending on your country.
•The illustrations in this Quick Setup Guide are based on the MFC-1910W.
•You must purchase the correct interface cable for the interface you want to use.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than
2 metres long.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T
or 100BASE-TX Fast Ethernet Network.
Remove the packing materials and install the toner cartridge
Load paper in the paper tray
Connect the machine to your computer/mobile device
Connect the power cord and turn on the machine
Change your language (if needed)
Only for certain models
Inbox Toner Cartridge Telephone Line Cord
(For MFC models)
(For MFC-1915W and
MFC-1916NW)
CD‑ROM A5 Long Edge Paper Input
Support
1. (DCP models)
1. Press Menu,andthenpress▲or▼tochoose1.General Setup.
2. Press OK.
(MFC models) Press Menu, 0, 0, and go to step 3.
2. Press▲or▼tochoose0.Local Language, and then press OK.
3. Press▲or▼toselectyourlanguage,andthenpressOK.
4. Press Stop/Exit.
3
5
2
7
1
• Windows®PC with a CD-ROM drive, go to step 7A
• Windows®PC without a CD-ROM drive, go to step 7B
• Macintosh, go to step 7B
• Mobile device users with a WPS/AOSS™-supported access point/router, go to step 7C
Back Front
Select your country/language
(Initial setup only)
After turning on the machine, you may be required to set your
country or language (depending on your machine).
If required, follow the on-screen instructions.
4
Adjust the paper guides to fit
the paper being used.
To use A5 Long Edge paper.
Connect the telephone line cord (for MFC models only)
(MFC-1915W / MFC-1916NW)
6
(MFC-1910W / MFC-1911W /
MFC-1911NW)
Quick Setup Guide
DCP‑1610W / DCP‑1615NW / DCP‑1616NW / MFC‑1910W /
MFC‑1911W / MFC‑1911NW / MFC‑1915W / MFC‑1916NW
Not all models are available in all countries.
The latest manuals are available at the Brother
Solutions Center: solutions.brother.com/manuals.
Watch our FAQ Videos for help
with setting up your Brother
machine:
solutions.brother.com/videos.
Version 0
OCE/ASA/SAF/GLF/TWN

Brother support web site http://support.brother.com
Configuration using the CD-ROM (Windows®)
Follow the on-screen
instructions until the
Connection Type screen
appears.
Finish
7A
Download the full driver and software package from the Brother Solutions Center.
(For Windows®) solutions.brother.com/windows
(For Macintosh) solutions.brother.com/mac
After you download the driver and software package, follow the on-screen instructions until the Connection Type screen appears. Refer to 7A Configuration using the CD-ROM
(Windows®).
If your wireless LAN access point/router supports automatic wireless (one-push) setup (WPS/AOSS™), you can set up your machine without using a computer.
Connection Type
Print and scan using your mobile device
For USB Connection
For Wireless Network Connection
We recommend preparing a USB cable
to use temporarily during the wireless
setup.
Follow the on-screen
instructions to continue
installation.
NOTE:
If connection is unsuccessful, repeat this step.
One-push wireless setup for mobile devices (Wireless models only)
Wireless Network Connection
[Recommended]
Select this option if you have a USB cable to
use temporarily for wireless setup.
Select this option if you do not have a USB cable.
Follow the on-screen
instructions to continue
installation.
NOTE:
If connection is unsuccessful, repeat this step.
Configuration without using the CD-ROM (Windows®without CD-ROM drive or Macintosh)
7C
7B
Finish
Press the WPS or AOSS™ button on your
wireless LAN access point/router.
Press the WiFi button on your machine.
Download “Brother iPrint&Scan” to start using your machine with mobile devices.
solutions.brother.com/ips
Wireless setup is now complete.
NOTE:
Before you can use your machine with your mobile device, download
“Brother iPrint&Scan.”
NOTE:
If the Brother screen does not appear automatically, go to Computer (My Computer).
(For Windows®8: click the (File Explorer) icon on the taskbar, and then go to Computer.)
Double-click the CD-ROM icon, and then double-click start.exe.
For Wired Network Connection
Connect a network cable first.