
You must follow steps 1to 5to complete the setup.
1 5
Anda harus mengikuti tahap 1hingga 5untuk menyelesaikan pengaturan.
Quick Setup Guide
Panduan Cepat
Read the Product Safety Guide first, then read this guide for the correct installation procedure.
Keep this guide next to your machine for quick reference.
Bacalah Panduan Keselamatan Produk (Product Safety Guide) terlebih dahulu, kemudian bacalah panduan
ini untuk langkah-langkah pemasangan yang benar.
Simpanlah panduan ini di dekat mesin Anda untuk referensi cepat.
Remove the protective tape
and the film covering the
machine.
Buka pita dan film pelindung
yang menutupi mesin.
en th id
1Unpack the machine and check the components
Mengeluarkan mesin dari kemasan dan memeriksa komponennya
DCP-T220 / DCP-T225
DCP-T420W / DCP-T425W
NOTE
• The components may differ depending on your country.
• Save all packing materials and the box in case you must ship your machine.
• We recommend using a USB 2.0 cable (Type A/B) that is no more than
2 metres long (included in some countries).
•
•
•
CATATAN
• Komponen mungkin berbeda tergantung negara Anda.
• Simpan semua bahan dan kotak kemasan jika sewaktu-waktu Anda harus
mengirimkan mesin Anda.
• Kami merekomendasikan penggunaan kabel USB 2.0 (Jenis A/B) yang
panjangnya tidak lebih dari 2 meter (sudah disertakan di beberapa negara).
2Fill the ink tanks with inbox ink
Isi tangki tinta dengan kotak tinta
IMPORTANT
Check the ink bottle model name on the label.
Using the incorrect ink may cause damage to the
machine.
PENTING
Periksa nama model botol tinta pada label.
Penggunaan tinta yang tidak benar dapat
mengakibatkan kerusakan pada mesin.
Open the ink tank cover a,
remove the cap b, and place
it on the back of the cover c.
a
b
c
Buka penutup tangki tinta a,
lepaskan tutupnya b, dan
letakkan di bagian belakang
penutup c.
Remove the film and tighten the cap firmly.
Lepaskan film dan kencangkan tutup
dengan kuat.
The bottle is self-standing and
the ink fills automatically until
the bottle is empty. To fill the
ink tank faster, squeeze the
bottle on both sides.
Botol tinta dapat berdiri sendiri
dan tinta terisi secara otomatis
sampai botol kosong. Untuk
mengisi tangki tinta lebih
cepat, remas kedua sisi botol.
Remove the nozzle cap and insert the bottle nozzle firmly into the ink tank so
that the ink does not spill.
Buka penutup nosel dan masukkan nosel botol dengan kuat ke dalam tangki
tinta agar tinta tidak tumpah.
When finished, remove the bottle,
pointing the nozzle upward so the ink
does not spill.
Setelah selesai, keluarkan botol,
arahkan nosel ke atas agar tinta
tidak tumpah.
Replace the ink tank cap. Repeat
step 2for the other ink tanks, and
then close the ink tank cover.
2
Pasang kembali tutup tangki tinta.
Ulangi langkah 2untuk tangki-
tangki tinta yang lain, dan kemudian
pasang penutup tangki tinta.
Video setup instructions:
Video petunjuk pengaturan:
support.brother.com/videos
BTD60BK
BT5000CMY
BT5001CMY
BT5009CMY
BT6000BK
BT6001BK
BT6009BK
1
2
3
D01GTE001-00
ASA/SAF/THA/IDN
Version//Versi 0