Bryant 580J*16D Series User manual

580J*16D
SINGLE PACKAGE ROOFTOP, GAS HEATING/ELECTRIC COOLING UNIT
WITH PURONR(R--410A) REFRIGERANT
SIZE: 16
Electrical Data Supplement
NOTE: Read the entire instruction manual before starting the installation
This supplement only applies to 580J size 16 units when the 13th digit of the Model Number is a “3”, as
shown in the Model Number Nomenclature diagram below. Check the Unit Nameplate (see Figs. 1 & 2). If
the digit in the 13th position is not a “3” discard this document.
MODEL NUMBER NOMENCLATURE
580JE16D240A3A0 AA
Model
580J = Gas Heating Rooftop Unit
Cooling Tons
16 = 15 ton
123456789
10 11 12 13 14 15 16 17
Coil Options For Round Tube/Plate Fin Condenser Coil Models Only
(Outdoor – Indoor – Hail Guard)
A = Al/Cu – Al/Cu
B = Precoat Al/Cu – Al/Cu
C = E-coat Al/Cu – Al/Cu
D = E-coat Al/Cu – E-Coat Al/Cu
E = Cu/Cu – Al/Cu
F = Cu/Cu – Cu/Cu
M = Al/Cu – Al/Cu – Louvered Hail Guards
N = Precoat Al/Cu – Al/Cu – Louvered Hail Guards
P = E-coat Al/Cu – Al/Cu – Louvered Hail Guards
Q = E-coat Al/Cu – E-coat Al/Cu – Louvered Hail Guards
R = Cu/Cu – Al/Cu – Louvered Hail Guards
S = Cu/Cu – Cu/Cu – Louvered Hail Guards
Coil Options For All Aluminum-Novation Condenser Coil Models Only
(Outdoor – Indoor – Hail Guard)
G = Al/Al – Al/Cu
H = Al/Al – Cu/Cu
J = Al/Al – E-coat Al/Cu
K = E-coat Al/Al – Al/Cu
L = E-coat Al/Al – E-coat Al/Cu
T = Al/Al – Al/Cu – Louvered Hail Guards
U = Al/Al – Cu/Cu – Louvered Hail Guards
V = Al/Al – E-coat Al/Cu – Louvered Hail Guards
W= E-coat Al/Al – Al/Cu – Louvered Hail Guards
X = E-coat Al/Al – E-coat Al/Cu – Louvered Hail Guards
Voltage
E = 460-3-60
P = 208/230-3-60
T = 575-3-60
Refirg. System/Gas Heat Options
A = Standard One Stage Cooling Models/Natural Gas Heat
B = Standard One Stage Cooling Models/Low NOx Heat
C = Standard One Stage Cooling Models/SS HX Heat
D = Two Stage Cooling Models
F = Two Stage Cooling Models and
Stainless Steel Gas Heat Exchanger
Heat Level
Standard/Stainless Steel
072 = 72,000 224 = 224,000
115 = 115,000 240 = 240,000
150 = 150,000 250 = 250,000
180 = 180,000 350 = 350,000
Low Nox
060 = 60,000
090 = 90,000
120 = 120,000
Indoor Fan Options
1 = Standard Static Option
2 = Medium Static Option
3 = High Static Option
C11016

2
SAFETY CONSIDERATIONS
Improper installation, adjustment, alteration, service,
maintenance, or use can cause explosion, fire, electrical
shock or other conditions which may cause personal
injury or property damage. Consult a qualified installer,
service agency, or your distributor or branch for
information or assistance. The qualified installer or
agency must use factory--authorized kits or accessories
when modifying this product. Refer to the individual
instructions packaged with the kits or accessories when
installing.
Follow all safety codes. Wear safety glasses and work
gloves. Use quenching cloths for brazing operations and
have a fire extinguisher available. Read these instructions
thoroughly and follow all warnings or cautions attached to
the unit. Consult local building codes and appropriate
national electrical codes (in USA, ANSI/NFPA70,
National Electrical Code (NEC); in Canada, CSA C22.1)
for special requirements.
It is important to recognize safety information. This is the
safety--alert symbol . When you see this symbol on the
unit and in instructions or manuals, be alert to the
potential for personal injury.
Understand the signal words DANGER, WARNING,
CAUTION, and NOTE. These words are used with the
safety--alert symbol. DANGER identifies the most serious
hazards which will result in severe personal injury or
death. WARNING signifies hazards which could result in
personal injury or death. CAUTION is used to identify
unsafe practices, which may result in minor personal
injury or product and property damage. NOTE is used to
highlight suggestions which will result in enhanced
installation, reliability, or operation.
ELECTRICAL HAZARD
Failure to follow this caution may result in personal
injury or product and property damage.
The electrical data contained in this document is only
for use with 48TC size 16 units which display a “3” in
the 13th position of the 17 digit model number as
displayed on the unit’s nameplate.
See Fig. 1 for location of the unit’s nameplate.
See Fig. 2 for details of the 17 digit model number.
CAUTION
!
ELECTRICAL SHOCK HAZARD
Failure to follow this warning could cause personal
injury or death.
Before performing service or maintenance operations
on unit, always turn off main power switch to unit and
install lockout tag. Unit may have more than one
power switch.
!WARNING
Nameplate Location
C11014
Fig. 1 -- Location of Unit Nameplate
580J*16D

3
580JE16D240A3A0AA
5
1
8
2
6
7
D
8
0
3
J
4
E
5
1
6
2
9
4
10
0
11
A
12
3
13
A
14
0
15
A
16
A
17
Model Number
Position of Digit
C11017
Fig. 2 -- Example of Nameplate with Model Number
580J*16D

4
Table 1 – Unit Wire/Fuse or HACR Breaker Sizing Data
UNIT
NOM.
V --- P h --- H z
IFM
TYPE
COMBUSTION
FAN MOTOR
POWER
EXHAUST NO C.O. or UNPWR C.O.
FLA FLA
NO P.E. w/ P.E. (pwrd fr/ unit)
MCA
FUSE
or
HACR
BRKR
DISC. SIZE
MCA
FUSE
or
HACR
BRKR
DISC. SIZE
FLA LRA FLA LRA
580J*16D
208/230--- 3--- 60
STD
0.48 3.8
68.3 80 71 396 72.1 80 76 400
MED 70.8 80 74 413 74.6 90 79 417
HIGH 77.8/75.8 100/100 82/80 424 81.6/79.6 100/100 87/84 428
4 6 0 --- 3 --- 6 0
STD
0.25 1.8
34.0 45 35 234 35.8 45 37 236
MED 35.0 45 37 243 36.8 45 39 245
HIGH 38.2 50 40 248 40.0 50 42 250
5 7 5 --- 3 --- 6 0
STD
0.24 3.8
26.5 30 28 184 30.3 40 32 188
MED 26.5 30 28 184 30.3 40 32 188
HIGH 29.8 35 31 187 33.6 40 36 191
Table 1 — Unit Wire/Fuse or HACR Breaker Sizing Data (cont)
UNIT
NOM.
V --- P h --- H z
IFM
TYPE
COMBUSTION
FAN MOTOR
POWER
EXHAUST w/ PWRD C.O.
FLA FLA
NO P.E. w/ P.E. (pwrd fr/ unit)
MCA
FUSE
or
HACR
BRKR
DISC. SIZE
MCA
FUSE
or
HACR
BRKR
DISC. SIZE
FLA LRA FLA LRA
580J*16D
208/230--- 3--- 60
STD
0.48 3.8
73.1 80 77 401 76.9 100 81 405
MED 75.6 100 80 418 79.4 100 84 422
HIGH 82.6/80.6 100/100 88/85 429 86.4/84.4 100/100 92/90 433
4 6 0 --- 3 --- 6 0
STD
0.25 1.8
36.2 45 38 236 38.0 50 40 238
MED 37.2 50 39 245 39.0 50 41 247
HIGH 40.4 50 43 250 42.2 50 45 252
5 7 5 --- 3 --- 6 0
STD
0.24 3.8
28.2 35 30 186 32.0 40 34 190
MED 28.2 35 30 186 32.0 40 34 190
HIGH 31.5 40 33 189 35.3 45 38 193
Legend and Notes for Table 1
LEGEND:
BRKR --- Circuit breaker
CO --- Convenience outlet
DISC --- Disconnect
FLA --- Full load amps
IFM --- Indoor fan motor
LRA --- Locked rotor amps
MCA --- Minimum circuit amps
P E --- Po w e r e x h a u s t
PWRD CO --- Powered convenient outlet
UNPWR CO --- Unpowered convenient outlet
NOTES:
1. In compliance with NEC requirements for multimotor and
combination load equipment (refer to NEC Articles 430 and
440), the overcurrent protective device for the unit shall be
fuse or HACR breaker. Canadian units may be fuse or circuit
breaker.
2. Unbalanced 3-Phase Supply Voltage
Never operate a motor where a phase imbalance in supply
voltage is greater than 2%. Use the following formula to de-
termine the percentage of voltage imbalance.
% Voltage Imbalance = 100 x
max voltage deviation from average voltage
average voltage
Example: Supply voltage is 230-3-60
AB = 224 v
BC = 231 v
AC = 226 v
Average Voltage = (224 + 231 + 226) =681
33
= 227
Determine maximum deviation from average voltage.
(AB) 227 – 224 = 3 v
(BC) 231 – 227 = 4 v
(AC) 227 – 226 = 1 v
Maximum deviation is 4 v.
Determine percent of voltage imbalance.
% Voltage Imbalance = 100 x 4
227
= 1.76%
This amount of phase imbalance is satisfactory as it is below the
maximum allowable 2%.
IMPORTANT: If the supply voltage phase imbalance is more than
2%, contact your local electric utility company immediately.
2011 Bryant Heating and Cooling Systems. D7310 W. Morris St. DIndianapolis, IN 46231 Printed in U.S.A. Edition Date: 01/11
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
Catalog No: SS580J---02
Replaces: New
580J*16D