BRZBrands Hot Art TH-810TN User manual

Hot Art™ Temperature Controller
Manual TH-810TN
Reference Diagram

Before using the controller, please read the following instructions carefully.
1. Heating / Cooling:
Press PWR and UP utton simultaneously for a out 3 seconds to
switch etween heating and cooling.
2. Temperature-value °C and °F:
Press UP and DOWN utton simultaneously for a out 3 seconds
to switch etween °C and °F.
3. Settings:
4.1 Press the Power utton (PWR) to set the value of temperature.
4.2 Cooling (Snowflake):
A. Press “UP” or “DOWN” repeatedly, set “SET” temperature
at least 2° C lower than “RM” temperature.
After 1-3 minutes, LED will turn green, outlet will turn on.
B. When “RM” temperature reaches “SET” temperature, LED
will turn red and snowflake will disappear, outlet will turn off.
C. When “SET” temperature is higher than “RM” temperature,
LED will display red and outlet will turn off.
4.3 Heating (Flame):
A. Press “UP” or “DOWN” repeatedly; set “SET” temperature
at least 2° C higher than “RM” temperature.
After 1-3 minutes, LED will display green, outlet will turn on.
B. When “RM” temperature reaches “SET” temperature, LED
will turn red and flame will disappear, outlet will turn off.
C. When “SET” default temperature is lower than “RM”
temperature, LED will display red and outlet will turn off.

General Specifications:
1. Operating voltage: 230V AC/ 50Hz
2. Load (Max):
• 10A / 2300W – Resistive load
• 2A / 460W – Inductive load
3. Operating Temperature: -10° C ~ 70° C
4. Temperature Control range: 5° C (40° F) ~ 30° C (85° F)
5. Precision: ±1° C
6. Measuring period: 10 sec.
Important safety precautions:
Do not plug any device performing mechanical movement directly into the
temperature controller. Fan or other appliances with exposed elements should
not e left unattended, and it is recommended that these types of appliances are
not connected to the temperature controller. Do not insert needles or any other
metal o jects into mains outlet. Avoid moisture, extreme temperatures, shock
and vi ration. Recommended am ient temperature is 10° C to 40° C. To clean
casing and display use a soft cloth. Do not use chemical or scouring agents. Do
not su merge in water. Keep device out of the reach of children.