BST E806TW User manual

BST-E806TW /BST-E816TW
Body Temperature Measurement
BSTsecurity ©7493 trans-Canada High Way, Saint Laurent (Montreal), QC, Canada H4T 1T3 . Tel: [phone] / www.bstsecurity.com
FEATURES
•FRP IP67 Case
•Sony IMX326 CMOS Sensor
•Visual Resolution 2592X1944
•160X120 Thermal Detector:
•High Temperature Measurement ( -10 ℃~ 450 ℃)
•Thermal/Overlay Mode: 1920X1080 (FHD)
•White LED: For Night Visual Image
•Manual On/Off or Automatic “ON” on temperature event
•Power LED: To check camera power status
SPECIFICATIONS
Models BST-E806TW BST-E816TW
Thermal
IR Sensor Frame Rate < 9 Hz
IR Sensor Resolution 80 (h) × 60 (v) 160 (h) ×120 (v)
Spectral Range LWIR , 8 to 14
Field of View (FOV) 51’ HFOV, 63.5 diagonal
(f/1.1 silicon doublet)
56 ‘ HFOV, 71 diagonal
(f/1.1 silicon doublet)
Temperature Sensitivity
(NETD) <50 mK (0.05℃)
Temperature Range Low Gain Mode: -10 ℃~ 140 ℃
High Gain Mode: -10 ℃~ 450 ℃
Visual
CMOS Sensor Sony Diagonal 6.15mm CMOSProgressive Scan
Effective Pixels 3096(H) X 2202(V) : 6.82M Pixel
Frame Rate 30 fps
Resized Resolutions Visual Mode Only: 2592X1944, 2048X1536, 1600X1200. All
Modes: 1920X1080, 1280X720, 1024X768, 640X480
Multi User Access 8
General
Alarm Out 1 port(Dry contact, relay out)
Operating Temperature 0℃~ 50℃
Power PoE(802.3.af), DC12V
Power Consumption 5W (LEDON)
IPLevel IP67
Dimension(wxhxd) 80x131X47(mm)

BST-E806TW /BST-E816TW
Body Temperature Measurement
BSTsecurity ©7493 trans-Canada High Way, Saint Laurent (Montreal), QC, Canada H4T 1T3 . Tel: [phone] / www.bstsecurity.com
Temperature Compensation
Maximum Temperature Point on the screen.
Measure the maximum temperature of the
face of a person with normal body temperature
at a distance of 1M from the camera and enter
an offset value in "offset" item on thermal
parameter setup page to a measurement error.
ex) 2 for 34 / +2 for 32 Celsius measurement
Emissivity Setup
•One of the most important parameters when measuring temperature using a non contact infrared thermometer is
the emissivity according to the object being measured
•Emissivity determines how accurately the temperature of an object can be measured
•The object that absorbs external energy and does not reflect is referred to as "Blackbody", which defines emissivity
as "1”
•This thermal camera has been calibrated for measuring temperature by using "black body“.
•To measure the skin temperature of human body more accurately, human skin emissivity should be applied.
•The emissivity of skin of human body is 0.985.

BST-E806TW /BST-E816TW
Body Temperature Measurement
BSTsecurity ©7493 trans-Canada High Way, Saint Laurent (Montreal), QC, Canada H4T 1T3 . Tel: [phone] / www.bstsecurity.com
Temperature
Change by
Distance
•Test Environment : Room
Temperature 23.7℃
•Human Skin Temperature
Measured by Infrared
Thermometer : 32.5℃
33.44℃ / 0.5M
32.78℃ / 1M
32.38℃ / 1.5M
31.91℃ / 2M

BST-E806TW /BST-E816TW
Body Temperature Measurement
BSTsecurity ©7493 trans-Canada High Way, Saint Laurent (Montreal), QC, Canada H4T 1T3 . Tel: [phone] / www.bstsecurity.com
31.50℃/ 2.5M
31.77℃ / 3M
31.32℃ / 3.5M
31.03℃ / 4M
•Within a distance of 50Cm, about 1 ℃is measured higher than the actual temperature.
•1.75 ℃difference is made from 1~4M distance. (Accuracy within ±2 ℃)
Temperature
Change by
Distance