(5)
Click " Lighting " on the left side of page and then click
" Strip Lights (BLE+Wi-Fi) or Strip Lights (Wi-Fi) "
(6)
Follow APP prompts to complete configuration.
(7)
Added devices will be displayed on home page after network
configuration is successful.
(8)
Click device you want to control to enter the control interface.
9.3. APP control
(1)
Click " device " or " group " you want to control on homepage to
enter control page, where you can control color, saturation,
brightness, color temperature, and scene.
(2)
Click music to enter music rhythm mode, light will change with
rhythm of music.
Note: Music rhythm mode requires phone keep on this page.
11. Support Google Home Control
Pleasesearch " Smart Life "skill in Google HomeAPP and activate
the skill
9. APP Installation
9.1. Download and install
or [Tuya Smart] APP
[Smart Life]APP
9.2. Network Configuration
(1)
Connect controller with power supply.
(2)
Confirm Pilot lamp is flashing quickly (2 flashes per second)
If Pilot lamp isn't in fast flashing state, there are two ways to enter:
●Long press " SET " key until Pilot lamp flashing quickly.
●Power OFF and ON once, long press Zone ON button of linked
remote until the LED strip blinking 3 times.(available remote model:
FUT089,B8,FUT088,B0,LM09)
(3)
Connect phone with home WiFi network in the 2.4GHz frequency.
(4)
Open homepage of APP and click " + " button at the upper right
corner of page.
Search for [Smart Life] in Apple or
Googlestore or scan following QR code
to download and install the app.
Please click
"
Register
"
button to create
account while using it in the first time, Login
directly if you already had account.
(3)
In the page of creating smart, you can set command to be executed
under the specified conditions (such as: turn on or turn off light, color,
brightness, mode, etc.)
9.5. Intelligent control
(1)
Click " Smart " at the bottom.
(2)
Click " + " in the upper right corner to create intelligent control.
10. Support Amazon Alexa Control
Please search "Smart Life "skill in Alexa APP and activate
the skill
9.4. Devicename editing, third-party control, device
sharing, group control.
(1)
Click " "on the upper right corner of control page toenteredit
page, where you can modify device name, icon, etc.
Click icon under third-party control to view detailed description of
(2)
third-party control.
(3)
Click " Share Device" to share device with familyandfriends.
(4)
Click " CreateGroup " and follow APP prompt after settingis
completed, the device can be controlled by group. WL5 and WB5
can not be the same group.
8.www.btf-lighting.com
Made in China
12.Detailed function introduction:
Controller can not
use in humid area
1. This link http://bitly.ws/jTnp
2. You can know more about this controller function ,On-off
,Dimmer,Scene,Music,Plan,Random timing ,Cycle timing,Sleep
plan,Wake up plan,Schedule,Timer,Biorhythm,Power on behavior
