Bticino 3500 User manual

Part. T8115A/GB - 04/04 - PC
User’s manual
Burglar alarm unit
Item No. 3500

Table of contents 1 Introduction 5
The Unit
The keypad
The display
What is the display showing
2 Operation 11
Enabling – disabling the burglar alarm (antitheft)
Activating - deactivating the zones
Stopping the siren sound
What type of alarm occurred?
3 Editing 17
The Unit menu
Accessing the edit menu
Setting the date and hour
Storing the Jolly number
Making your own list of telephone numbers
Setting up the calls
How many times should the calls be made?
Editing vocal messages
Changing the user code
Using an answering machine
4 Remote use 31
The My Home portal
Answering a call from the Unit
Querying the Unit
Controlling your home from a distance
Memo card

51
Introduction
The Unit
The keypad
Navigation keys
Alphanumeric keypad
The display
What is the display showing

6
Introduction
1
■The Burglar alarm (antitheft) Unit
1 -Loudspeaker
2 -Graphic display
3 -IR infrared receiver
4 -Tr ansponder keys reader
1
2
3
4
7
5
6
5 -Alphanumeric keypad
6 -Microphone
7 -Navigation keys
The Burglar alarm (antitheft) unit combines both Burglar alarm
(antitheft) and telephone Dialling device (communicator) func-
tions in one apparatus to give you an intelligent detecting and
remote alarm signalling system.
The Burglar alarm (antitheft) guards the safety of your house;
the system is split into zones that can be activated separately;
for example, at night, you can have protection only in the day
zone or only around your house, so you can move around
freely even when the system is on.
In case of an alarm, the Telephone dialling device
(communicator) warns you with a message, allowing you to
have direct control on what is happening in your house even
when you’re not there.
You can check the status of the Unit and system from a fixed
or mobile phone, listen to what is happening at home from a
distance or send a vocal message, which will be emitted
through the Unit loudspeaker or, if connected, through the
sound system.
The combination of roller shutter movement devices and lights
turning on lets you program the roller shutters to go up in case
of an alarm in order to confuse the burglar.
You can control the functions in your house (lights, roller
shutters, etc.) remotely with just a telephone call.
My Home portal Services
This lets you connect to the My Home portal and makes available
the My Home web service; for further details see page 30.

7
Introduction 1
■The keypad
Scroll keys
allow you to scroll the list
of items in the menu
Selection keys
allow you to select the
functions, which in some
menus, may appear in the
last line
OK - Key for entering the
selection or data
CLEAR - Key for cancelling
the selection and for
returning to the previous
page – if it is held down,
you can escape from the
programming menu
Writing the text
◆Press a numeric key several times until the required character
is displayed; if the required letter is near the same key as the
present letter, wait until the cursor moves
◆To enter a space, press
0
◆To move the cursor, use the keys
◆To delete a letter, position the cursor over it with the keys
and press
0
◆To change from lower case to upper case, hold down the button
when the required character is displayed.The next characters
will be upper case; the procedure is the same to go back to
lower case
◆You can enter punctuation marks by pressing
Navigation keys  Alphanumeric keypad

8
Introduction
1
■What is the display showing
1 2 3 4 -- -- -- --
15/07/03 14:22
1 2 3 4 -- -- -- --
1 2 3 4 -- -- -- --
15/07/03 14:22
System off,
e.g.: zones 1, 2, 3, 4 active
System on,
e.g.: zones 1 and 4 enabled,
zones 2 and 3 disabled
System off,
Technical alarm signal
■The display
 Initial page
1 2 3 4 -- -- -- --
15/07/03 14:22
1 2 3 4 -- -- -- --
ZONES
1:Entrance
2:Perimeter
3:Night
Exclude
System zones
(Max 8 zones)
Date and
hour
on/off indication
Technical indications
Alarm signal zone
 In case of an alarm
 Edit menu
Functions
Active zones
Disabled zones

9
Introduction 1
1 2 3 4 -- -- -- --

1 2 3 4 -- -- -- --
1 2 3 4 -- -- -- --
System on,
Burglar alarm (antitheft) signal
and telephone call in progress
System off,
recharging Unit battery
System off,
no power
1 2 3 4 -- -- -- --
15/07/03 14:22
1 2 3 4 -- -- -- --
15/07/03 14:22
1 2 3 4 -- -- -- --
-
+
System off,
Burglar alarm (antitheft)
battery
dead or damaged and
technical alarm
■What is the display showing
System off,
Te lephone call disabled
(Important Unit functions are
disabled; disable only if
extremely necessary.)
System off,
Detector disabled
(Important Unit functions are
disabled; disable only if
extremely necessary.)

11
Enabling - disabling the burglar alarm (antitheft)
 With user code
 With remote control
 With transponder key
Activating - deactivating the zones
 With remote control
 With transponder key
 From the Zone menu
Stopping the siren sound
 With remote control
 With user code
 With transponder key
What type of alarm occurred?
2
Operation

12
Operation
2
■Enabling - disabling the burglar alarm
(antitheft)
 With user code
When the burglar alarm
(antitheft) is disabled, an open
lock appears in the middle of
the display
The display will show a closed
lock; if the sound system is
enabled, you will hear an
“enabled” vocal message;
execute the same operation to
disable the burglar alarm
(antitheft)
1 2 3 4 -- -- -- --
25/05/03 12:23
1 2 3 4 -- -- -- --
25/05/03 12:23
1 2 3 4 -- -- -- --
25/05/03 12:23
 With remote control
When the burglar alarm (antitheft)
is disabled, an open lock
appears in the middle of the
display
To enable the burglar alarm
(antitheft), press the remote
control button after directing it
towards the Unit infrared receiver
at a distance of 30 cm (max).
Press the key
Type in the user code
(basic 00000)
1 2 3 4 -- -- -- --
25/05/03 12:23
1 2 3 4 -- -- -- --
25/05/03 12:23
The display will show a closed
lock; if the sound system is
enabled, you will hear an
“enabled” vocal message;
execute the same operation to
disable the burglar alarm
(antitheft)

13
Operation 2
1 2 3 4 -- -- -- --
25/05/03 12:23
1 2 3 4 -- -- -- --
25/05/03 12:23
1 2 3 4 -- -- -- --
25/05/03 12:23
 With transponder key
When the burglar alarm
(antitheft) is disabled, an open
lock appears in the middle of
the display
To enable the burglar alarm
(antitheft), press the key on
the Unit keypad and then bring
the key (less than one
centimeter) near the reader for 2
seconds
The display will show a closed
lock; if the sound system is
enabled, you will hear an
“enabled” vocal message;
execute the same operation to
disable the burglar alarm
(antitheft)

14
Operation
2
■ Activating - deactivating the zones
You can deactivate (reactivate) one or more zones at any time.
This will allow you to personalise the burglar alarm (antitheft)
operation according to your needs.
For instance, if you want to have protection even if you’re not
at home, you can deactivate the infrared detector zones,
leaving the outer zones (entrance door and windows) active.
This will allow you to move around freely inside your house
without making any alarms go on and without giving up safety.
The zones in which your burglar alarm (antitheft) is split into
appear in the first line of the display.
The active zones are shown in a dark box;
the following example shows the system made up of 4 zones,
all active; zone 3 is deactivated.
The zones (max 8) of the
system are all active
(e.g. 1-2-3-4)
Press the corresponding key on the
Unit keypad to deactivate zone 3
The Unit confirms the operations
with the vocal message
“executed”; the display shows
zone 3 without the dark box
(deactivated)
1 2 3 4 -- -- -- --
25/05/03 12:23
1 2 34 -- -- -- --
25/05/03 12:23
1 2 34 -- -- -- --
25/05/03 12:23
Press the remote control button
within 5 seconds to enter operation.
 With remote control

15
Operation 2
 From the Zone menu With transponder key
The zones (max 8) of the system
are all active
(e.g. 1-2-3-4)
Press the corresponding key on
the Unit keypad to deactivate
zone 3
The Unit confirms the operations
with the vocal message
“executed”; the display shows
zone 3 without the dark box
(deactivated)
Confirm the operation by bringing
a transponder near the reader
within 5 seconds.
After accessing the edit menu (next
section)
Select the zone you want to
activate or deactivate with the
keys (e.g. 3)
Hold down the key to escape
from menu
1 2 3 4 -- -- -- --
25/05/03 12:23
1 2 34 -- -- -- --
25/05/03 12:23
1 2 34 -- -- -- --
25/05/03 12:23
SELECT
Antitheft
Communicator
ANTITHEFT
Zones
Devices
Event memory
Date and hour
1 2 34 -- -- -- --
25/05/03 12:23
ZONES
1:Entrance
2:Perimeter
3:Night
Exclude
Press to access the burglar
alarm (antitheft) menu
Press to access the zone menu
Press to enter

16
Operation
2
■Stopping the siren sound
If the alarm goes on while you’re there, you can stop the siren
as follows:
 With remote control
1 2 3 4 -- -- -- --
1 2 3 4 -- -- -- --
1 2 3 4 -- -- -- --
Make sure there are no
trespassers in the house
Press the remote control button
after directing it towards the Unit
infrared receiver at a distance of
30 cm (max).
The siren stops; the Unit answers
with the vocal message
“disabled”.
 With user code
Make sure there are no
trespassers in the house
Press the key
Type in the user code
(basic 00000)
The siren stops;
the Unit answers with the vocal
message “disabled”.
1 2 3 4 -- -- -- --
1 2 3 4 -- -- -- --

17
Operation 2
 With transponder key
1 2 3 4 -- -- -- --
1 2 3 4 -- -- -- --
1 2 3 4 -- -- -- --
Press the key on the Unit
keypad and then bring the key
(less than one centimeter) near
the reader for 2 seconds
Make sure there are no
trespassers in the house
The siren stops;
the Unit answers with the vocal
message “disabled”.

18
Operation
2
■What type of alarm occurred?
When an alarm signal is displayed, you can find out what type
it is (intrusion, technical, etc.) and which detector has
detected it; a name has been given to each detector (kitchen
window, entrance, etc.) by the installer for easier identification.
Press just one key to get this information.
To learn more, press the key.
The display provides the following information:
-detector and its name (kitchen window)
-type of alarm (intrusion)
-burglar alarm (antitheft) status when the
alarm goes on (ON)
The alarm signal is cancelled from the display
the next time you turn on the burglar alarm
(antitheft), but it remains memorised in the
“Event memory”, which can be consulted by
selecting “Event memory” in the Burglar alarm
(antitheft) menu.
The Unit has detected an alarm…
MEMO ALARMS
32: IR sensor
Kitchen window
Intrusion alarm
Inserted
1 2 3 4 -- -- -- --
1 2 3 4 -- -- -- --
MEMO ALARMS
42:receiver
telerescue
technical start
Disconnected
ATTYENZIONE
press:
OK single reset
OK total reset
1 2 3 4 -- -- -- --
In case of a technical alarm (its symbol appears), you can find
out which device has produced the alarm and reset it as well.
To learn more, press the key.
The display provides the following information:
-device name (telerescue)
-type of alarm (technical start)
-burglar alarm (antitheft) status when the
alarm goes on (OFF-disconnected)
The Unit has detected a technical
alarm
By pressing the key, a page appears,
which lets you reset a single alarm or
execute a total reset

19
The Unit menu
Accessing the edit menu
Setting the date and hour
Storing the Jolly number
Making your own list of telephone numbers
Setting up the calls
How many times should calls be made?
Editing vocal messages
Changing the user code
Using an answering machine
Setting up the answering machine
Programming the answer
How to communicate with the Unit?
3
Editing

20
Editing
3
■The Unit menu
This manual describes the editings that are considered to be
helpful when using the Unit. You can access these editings
without jeopardizing the proper functioning of the Unit as well
as the safety of your house.
When you access the configuration menu, you will note that
this is made up of many other pages that let you configure the
Unit in order to meet your needs.
Some of these pages cannot be accessed, as they are
reserved for the installer and protected by a special code.
We suggest that you always contact your installer before
changing any configuration of the Unit among those described
in this manual.
■Accessing the edit menu
To escape from the edit menu, wait 30 seconds without
pressing any key or press the button.
Press OK
Type in the user code or use
the remote control or the
transponder key, as when
turning on the burglar alarm
(antitheft)
Make sure that the system is off
You can now start the editing of the
Unit
This procedure is necessary to access the edit menu:
SELECT
Antitheft
Communicator
1 2 3 4 -- -- -- --
21/09/03 15:32
1 2 3 4 -- -- -- --