Bticino HC4608 User manual

MY HOME 1 Technical sheets – Burglar alarm
4 5 6
1 2 3
7 8 9 C OK
0 P
4
2
5
6
3
1
HC/HD/HS/L/N/NT4608
BT00025-b-UK
Description
Using the transponder key, or a secret code set on the central unit, this device with
display and digital keypad can be used to arm/disarm the system and separate the zones
with the same exibility and using the same procedure as for burglar-alarm central unit
with display, or three module ush mounted central units.
In this way the central units can be installed in an appropriate equipment room, out of
sight.
All system status details are shown of the large backlit display.
Legend
1 - Graphic display: displays the messages which guide the programming operations
and the events which have occurred.
2 - Transponder reader: receives the burglar-alarm system switching on and o
commands directly from the transponder keys.
3 - Alphanumeric keypad: allows the manual switching on of all those programming
operations which require the use of numbers and/or symbols.
4 - C key: exit the current menu and the programming.
5 - OK key: to conrm the programming operations.
6 - Navigation keypad: navigate the menu.
Technical data
- Power supply from SCS BUS: 27 Vdc
- Max. absorption: 28 mA
- Operating temperature: 5 – 40°C
Dimensional data
Size: 3+3 modules
Front view
Display keypad

2MY HOME Technical sheets – Burglar alarm
BT00025-b-UK
HC/HD/HS/L/N/NT4608
Conguration
The activator with display must be congured by assigning a zone address (Z), indicating
the activator group it belongs to, and a progressive number (N) within the group.
To congure it as belonging to the activators group, no value must be entered in Z.
The conguration is performed using a specic menu shown on the display, following
the procedure below:
1. Ensure that the system is in“maintenance”mode.
2. Upon switching on the activator, the“SETTING”screen appears in Italian language.
3. Select “Address”(address).
4. Enter the Z and N address to assign to the activato and press OK to conrm.
5. Enter the other settings or return to the main page, and start the learning procedure
on the central unit.
Selecting the central unit installed in the system
1. Select “type of central unit”.
2. Select the type of burglar-alarm central unit installed:
-“Display”for central unit item 3486, item 3485/B and item HC/HD/HS/L/N/NT4601 -
“No display”for central unit item L/N/NT4600/4 and AM5780/4.
3. Press OK to conrm.
4. Enter the other settings or return to the main page, and start the learning procedure
on the central unit.
For further device customisation procedures refer to the information on the CD supplied
with the product.
Address conguration menu
SETTINGS
Language
Address
Central unit type
Address--
SETTINGS
Language
Address
Central unit type
Address 12
SETTINGS
Language
Address
Central unit type
Address12
WARNING
Modified address
run system
learning
Address conguration menu
SETTINGS
Language
Address
Central unit type
Display
SETTINGS
Language
Address
Central unit type
No display
SETTINGS
Language
Address
Central unit type
No display
in progress...