Buffalo Tools PS07213 User manual

PS07213
Detail Palm Sander
Operating Instructions
PS07213 Detail Palm Sander Operating Instructions 1
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
This manual provides important information on proper operation & maintenance. Every effort has been
made to ensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this product at any time without
prior notice.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,
DO NOT OPERATE THIS PRODUCT!
DO NOT RETURN THIS PRODUCT TO THE RETAILER - CONTACT CUSTOMER SERVICE.
If you experience a problem, have questions or need parts for this product, call Customer Service at
1-888-287-6981, Monday-Friday, 8 AM - 4 PM Central Time. A copy of the sales receipt is required.
FOR CONSUMER USE ONLY – NOT FOR PROFESSIONAL USE.
KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE
REFERENCE.

PS07213 Detail Palm Sander Operating Instructions 2
FEATURES:
• Ergonomic Handle
• Easy-To-Use Hook And Loop Sandpaper Retention System
• Easy Access On/Off Switch
• Small Size For Fast & Efficient Sanding
SPECIFICATIONS
Rated Current 0.80 AMP
Rated Voltage 120V / 60 Hz
No-Load Speed 12,000 RPM
KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE
REFERENCE. READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
When unpacking, check to make sure all parts listed are included. If any parts are
missing or broken, please call Customer Service at 1-888-287-6981.
FOR CONSUMER USE ONLY – NOT FOR PROFESSIONAL USETABLE OF CONTENTS

RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS
What You Need to Know About Safety Instructions
Warning and Important Safety Instructions appearing in this manual are not meant to cover all possible conditions and
situations that may occur. Common sense, caution and care must be exercised when operating or cleaning tools and
equipment.
Always contact your dealer, distributor, service agent or manufacturer about problems or conditions you do not
understand.
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING indicates a potentially hazardous situation which,
if not avoided, could result in death or serious injury.
CAUTION indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate injury.
CAUTION used without the safety alert symbol indicates a
potentially hazardous situation which, if not avoided, may
result in property damage.
NOTE provides additional information that is useful for proper use and
maintenance for this tool. If a NOTE is indicated make sure it is fully
understood.
PS07213 Detail Palm Sander Operating Instructions 3

Keep your work area clean and well lit. Cluttered work benches and dark work areas may cause accidents or injury.
Do not operate power tools in explosive areas, such as in the presence of flammable liquids, gases or dust. Power tools create
sparks, which may ignite the dust or fumes.
Keep bystanders, children and visitors away while operating a power tool. Distractions can cause you to lose control.
Double insulated tools are equipped with a polarized plug (one blade is wider than the other.) This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician to install a polarized outlet. Do not change the plug in any way. Double insulation eliminates the need for the three wire
grounded power cord and grounded power supply system.
Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of
electric shock if your body is grounded.
Do not abuse the cord. Never use the cord to carry the tool or pull the plug from an outlet. Keep the cord away from heat, oil,
sharp edges, or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.
When operating the tool outside, use an outdoor extension cord marked “WA” or “W.” These cords are rated for outdoor use
and reduce the risk of electric shock. Make sure the extension cord being used is in good condition. If there are any cuts or nicks (no
matter how deep) in the insulation, DO NOT use that cord. Also, make sure the extension cord is heavy enough to carry the current
needed. DO NOT use small “around-the-house” lamp extension cords. These cords can easily overheat and/or catch fire when used
with power tools.
Use clamps or other practical ways to secure and support the work piece to a stable platform. Holding the work by hand or
against your body is unstable and may lead to loss of control.
Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is
designed.
Do not use the tool if the power switch does not turn it “ON” or “OFF”. Any tool that cannot be controlled with the switch is
dangerous and must be repaired.
Disconnect the power cord plug from the power source before making any adjustments, changing accessories or storing the
tool. Such preventive safety measures reduce the risk of starting the tool accidentally.
Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.
People with pacemakers or other electronic devices should consult with a physician before operating this product. Interruption
or failure of the pacemaker could occur when electrical equipment is operated within close proximity of electrical devices.
Inhaling dust created as a result of construction projects could be hazardous to your health. Construction dust may contain
chemicals, which are known to cause cancer, birth defects and other reproductive harm in the State of California.
These chemicals could be, but are not limited to: lead from lead based paints, crystalline silica from bricks or cement, arsenic, and
chromium from chemically treated-lumber.
To reduce your risk of exposure to harmful materials: always wear a dust mask that is designed to filter out hazardous microscopic
contaminants, always work in a well ventilated area, and wear other approved safety equipment.
PS07213 Detail Palm Sander Operating Instructions 4

Wash hands after handling the power cord. Touching the power cord could expose you to lead, which is known in the State of
California to cause cancer, birth defects and other reproductive harm.
All work areas should be clean and well lit. Accidents are more likely to occur in poorly lit and cluttered areas.
Do not operate power tools in the presence of flammable liquids, gas, or dust. Sparks created from the power tool could ignite
flammable materials.
Keep children, and other distractions at a distance while operating power tools.
This power tool is equipped with a polarized plug, meaning one blade is wider than the other and is designed to fit into a
standard polarized outlet. The plug will fit into polarized outlets only one way. DO NOT FORCE THE PLUG INTO THE OUTLET! If
the plug does not fit, a polarized outlet may need to be installed by a qualified electrician.
Keep the power cord in good condition, and replace damaged cords immediately. Do not use the cord to pull the plug from the
outlet. Keep the cord away from materials and surfaces that could damage cords. The risk of electric shock increases when the power
cord is damaged.
Always use the appropriate extension cord, making sure it is rated for use with power tools. Always be sure the extension cords
are in good condition, free of cuts or nicks in the insulation. If using the power tool in an outside area with an extension cord, make sure
the cord is rated for outdoor use.
Do not make contact with a grounded surface while using this power tool. Contact with surfaces like pipes, radiators or major
appliances increases your risk of electric shock.
Use common sense while operating this power tool.
Do not use this tool if you are:
• Feeling tired or are under the influence of alcohol or drugs.
• Wearing loose clothing or jewelry. Keep long hair pulled back and away from moving parts.
• Overreaching or have improper footing. Handling the tool in this way could cause serious injury.
When using this power tool always:
• Wear the proper safety equipment, such as safety goggles, dust masks, non-skid shoes, etc.
• Check to be sure all adjusting keys or wrenches have been removed before starting the power tool.
• Check to be sure the power switch is in the “OFF” position before plugging the power tool into an electrical outlet.
Only qualified repair personnel must perform tool service. Service or maintenance performed by unqualified personnel could result
in a risk of injury.
Safety glasses and ear protection must be worn during operation.
PS07213 Detail Palm Sander Operating Instructions 5

Follow these steps to maintain safe working conditions and good working condition of power tools. Improper care can result in
electric shock or serious injury.
• Secure and support the work piece using clamps. Do not use your hands to hold the piece in place.
• Use the correct tool for the job. Using the correct tool is safer and faster.
• Make sure the power switch is in good working order. If the power switch no longer turns the tool “ON” or “OFF”,
discontinue use, and have the tool replaced or repaired.
• Remove the power cord from the power source before storage, changing accessories, or moving the tool.
• Keep out of reach of children, or any untrained person. Store tools in a safe and dry place.
• Keep tools clean, and cutting tools sharp. Maintaining tools with proper care will increase the life of the power tool, and
reduce the risk of injury.
• Check to be sure all moving parts are free from binding and are properly aligned.
• Use only accessories that are recommended by the manufacturer for your tool model.
• Hold the tool by the insulated grip when using in an area where contact with a “live” wire is a possibility.
You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other
masonry. This dust often contains chemicals known to cause cancer, birth defects, or other reproductive harm. Wear
protective gear.
SERVICE
Tool service must be performed only by qualified repair personnel. Service or maintenance by unqualified personnel could result in a
risk of injury.
When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use
of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
This manual contains important information regarding safety, operation, maintenance and storage of this product. Before use, read carefully
and understand all warnings, cautions, instructions and labels. Failure to do so could result in serious personal injury, property damage or
even death.
IMPORTANT SAFETY INSTRUCTIONS
Before using, you need to become familiar with the operation of the tool. If you are unsure about the operation of the tool, or have
any questions about the proper use of the tool, call the Customer Service Department at 1-888-287-6981.
Follow these instructions for safe handling of the tool:
• Always secure and support the work piece using clamps. Do not use your hands to hold the piece in place.
• Do not use solvents containing carbon tetrachloride, ammonia or acetone to clean the tool. Never use gasoline, paint
thinner, or other caustic chemicals that can damage the plastic parts of the tool.
• Always use the appropriate safety gear when operating this tool. Including but not limited, to goggles, dust mask or respirator.
Always work in a well-ventilated area to reduce your exposure to harmful chemicals and dust particles.
MAINTENANCE
Disconnect the power supply before cleaning. Wear safety eyewear before cleaning. Used compressed dry air to blow off dust
and debris. Use a soft bristle brush if com
p
ressed air is not available.
PS07213 Detail Palm Sander Operating Instructions 6

SPECIFIC SAFETY RULES AND/OR SYMBOLS
SYMBOLS
The following symbols may be used on your tool. Be familiar with and learn the symbols to operate the tool safely.
Symbol Name Description
V Volts Voltage (Potential)
A Amperes Current
Hz Hertz Frequency (Cycles per Second)
W Watt Power
Kg Kilograms Weight
Alternating Current Type of Current
Direct Current Type of Current
Alternating or Direct Current Type of Current
Earthing Terminal Grounding Terminal
Class II Construction Denotes Double Insulation
min Minutes Time
s Seconds Time
Diameter Size of Drill Bits, Grinding Wheel Bits, etc.
No Load Speed No-load Rotational Speed
…/min Revolutions per Minute Revolutions, Surface Speed, Strokes, etc per Minute
1,2,3… Ring Selector Settings Speed, Torque or Position Settings
PACKAGE CONTENTS
• Electric Palm Sander
• 4 Pieces Sanding Sheets
COMPONENTS
Observe the locations and functions of the various components and controls of this tool.
PS07213 Detail Palm Sander Operating Instructions 7
2
1. On/Off Switch
2. Grip
3. Motor Housing
4. Hook And Loop Base
1
3
4

SELECTING SANDPAPER
Unplug the power plug from the AC power source before assembly, adjustments, or adding/removing accessories.
This compact PSANDUL Detail Palm Sander is designed to sand the hard-to-reach areas larger sanders cannot touch. The pointed tip gets in tight
spaces that larger sanders cannot reach.
Coated abrasives like sandpaper come in many varieties for a variety of applications. For best results, start your project using coarse grit
sandpaper and finishing with fine grit. When working with wood, sand with the grain.
APPLYING SANDPAPER
Before applying new sandpaper to this Detail Palm Sander, make sure the hook surface is free of debris. Apply new sandpaper to this Detail
Palm Sander by pressing the loop backing on the sandpaper against the hook surface on the sander and pressing firmly. This convenient Detail
Palm Sander does not need clamps or retainer clips to hold the sandpaper in place.
SANDER OPERATION
Unpack product from package and review contents. Keep all packaging until product has been reviewed.
The On/Off switch on the front of the sander starts the sander. Allow the sander to reach full speed before touching the work surface. Always
remove the sander from the work piece before turning off the power switch.
SANDING TIPS
Applying too much pressure can result in damage to the sander, which could result in serious injury.
Always secure the work piece using clamps. Never use your hands to hold the work piece in place. An unsecured work piece could cause
serious injury.
Double check that your hand is not blocking the cooling vents. Blocking the vents could result in the tool overheating.
Wear safety eyewear and dust filters or respirators while using the tool.
The motor may overheat if run for long periods of time. If the motor begins to show signs of overheating, turn the sander “Off” and allow
the motor to cool before continuing.
Before beginning, check to make sure the sandpaper is held securely in place.
When sanding, sand with the grain and let the sander do the work. Applying too much pressure will cause you to use more sandpaper and may
result in damage to the sander. Move the sander back and forth in a consistent pattern until the desired smoothness or texture of the wood is
achieved. For best results, start sanding with a coarse grade of sandpaper and finish with a fine grade.
PS07213 Detail Palm Sander Operating Instructions
(PS072130909) 8