buratti meccanica Clorofilla Spot User manual

Revision 00_30.09.2020
Manual Code CLO_S_00_202009
ORIGINAL INSTRUCTIONS
English
EN
USE AND MAINTENANCE MANUAL
Bicyle Work Stand
Spot
Serial Number
Manufacturing Year

Pag. 2 di 17
00_15.07.2020
Buratti Meccanica Copyright ©2019

Pag. 3 di 17
00_15.07.2020
Buratti Meccanica Copyright ©2019
1. INTRODUCT 4
1.1. THE MANUAL 4
1.2. COPYRIGHT 4
1.3. HOW TO READ THIS MANUAL 4
1.4. GENERAL WARNINGS 4
2. GENERAL INFORMATION 5
2.1. MANUFACTURER’S DATA 5
2.2. CLOROFILLA’S DATA 5
2.3. WARRANTY 5
2.4. GENERAL WARNINGS 5
3. GENERAL DESCRIPTION 6
3.1. MAIN CHARACTERISTICS AND FUNCTIONS 6
3.2. HOW TO USE CLOROFILLA SPOT 6
3.3. CLOROFILLA’S COMPONENTS 7
3.4. TOOLS 8
3.5. DIMENSION 8
4. UNPACKING AND INSTALLATION 9
4.1 RECOMMENDED INSTALLATION 9
4.2 UNBOXING PROCESS AND START-UP 11
4.3 ELECTRIC WIRING 13
4.4 ELECTROMAGNETIC COMPATIBILY 13
5. MAINTENANCE 14
5.1. MAINTENANCE OPERATIONS 14
5.2. CLOROFILLA’S DISPOSAL 14
6. ATTACHMENTS 15

Pag. 4 di 17
00_15.07.2020
Buratti Meccanica Copyright ©2019
1. INTRODUCT
1.1. THE MANUAL
IMPORTANT: This manual must be carefully stored and replace in case of any deterioration or lack
of readability.
1.2. COPYRIGHT
This manual is under the ownership of BURATTI MECCANICA S.r.l. Every duplicate, even partial, is
strictly prohibited. The descriptions and the illustrations given in this manual are not binding.
BURATTI MECCANICA S.r.l. is the only one who can edit it.
©RESERVED RIGHTS: Every reproduction right in this manual is reserved to BURATTI MECCANICA S.r.l.
Reprint, duplication and translation are prohibited without a written authorization by BURATTI
MECCANICA S.r.l. even partially. The manual cannot be given to third parties without any written
authorization by BURATTI MECCANICA S.r.l.
1.3. HOW TO READ THIS MANUAL
In this manual have been used recurring graphic styles with the aim to make the comprehension easier.
Warnings and/or the instructions that are essential have been highlighted with the following symbols:
IMPORTANT: Means a very important information worthy of attention.
ATTENTION:means helpful hints that must be taken into consideration to avoid damaging CLOROFILLA
SPOT or its parts.
1.4. GENERAL WARNINGS
This manual has been issued by the manufacturer and it is part of CLOROFILLA’s equipment. It contains
all the information needed to guarantee its usage and maintenance.
BURATTI MECCANICA S.r.l. cannot predict every single risk, hence all the warnings included in this
manual may not cover all security’s cautions. If you have any doubt regarding installation, use and
maintenance procedures, please refer to BURATTI MECCANICA S.r.l.
IMPORTANT: The person in charge of the installation of CLOROFILLA SPOT must have read this manual
in all its parts before the start-up.
IMPORTANTE:BURATTI MECCANICA S.r.l. has the right to amend CLOROFILLA SPOT and its technical
documentation without any requirement by third parties. Contents and warning of this manual are
valid starting from the issuing.
i
i
i
i

Pag. 5 di 17
00_15.07.2020
Buratti Meccanica Copyright ©2019
2. GENERAL INFORMATION
2.1. MANUFACTURER’S DATA
Buratti Meccanica S.r.l.
Headquarter: via Archimede n. 535, 47521 Cesena (FC)
Tel. [phone]
Fax. [phone]
Web: http://www.burattimeccanica.com
Mail: [email protected]
2.2. CLOROFILLA’S DATA
CLOROFILLA’S work stand data, which are the object of this manual, are the followings
SERIAL NUMBER:
MANUFACTURING YEAR:
ATTENZIONE: Do not remove or damage the identification plate.
2.3. WARRANTY
CLOROFILLA’s warranty lasts 24 months. CLOROFILLA SPOT has successfully passed in the factory all
the tests required by the manufacturer.
Warranty does not cover vandalism and tampering but only materials, manufacturing and assembly
defects.
2.4. GENERAL WARNINGS
The manufacturer waives any and all responsibility for damages caused by non-observance of the
instructions of this manual
ATTENTION: Before starting any operation, check the working area looking for possible endangered
condition for people or CLOROFILLA SPOT.
ATTENTION: Do not hang yourself on CLOROFILLA’s structure.
ATTENTION: Do not hang on CLOROFILLA’s supports any object which weight goes beyond 50kg.
ATTENTION: It’s strictly prohibited to hang yourself on CLOROFILLA’s supports.

Pag. 6 di 17
00_15.07.2020
Buratti Meccanica Copyright ©2019
3. GENERAL DESCRIPTION
CLOROFILLA SPOT is a bicycle work stand whose used to recharge the batteries of electric bicycles.
USB sockets are present.
3.1. MAIN CHARACTERISTICS AND FUNCTIONS
3.2. HOW TO USE CLOROFILLA SPOT
Hang the bicycle and place the extremity of
the saddle on one of the 2 support pipes
(ref.4).
Recharge using one of the 3 power sockets
present in CLOROFILLA SPOT (ref. 7).
After the recharge, lift the bicycle up again
and then place it on the floor.
MAIN CHARACTERISTICS AND FUNCTIONS
RECHARGE
URBAN FURNITURE

Pag. 7 di 17
00_15.07.2020
Buratti Meccanica Copyright ©2019
3.3. CLOROFILLA’S COMPONENTS
Ref. Qty DESCRIPTION
1 1
Dome Ø200
2
1
Differential fixing flange
3
2
Saddle sleeve Ø52
4
2
Protective sleeve
5
1
Fixing plate
6
1
Differential switcher
7
3
Power socket
8
1
Light power presence

Pag. 8 di 17
00_15.07.2020
Buratti Meccanica Copyright ©2019
3.4. TOOLS
CLOROFILLA SPOT comes with 3 power sockets, n.2 schuko for recharge bike and n.1 USB for
electronic devices.
3.5. DIMENSION
35 cm
37 cm
110cm
97cm
107 cm

Pag. 9 di 17
00_15.07.2020
Buratti Meccanica Copyright ©2019
4. UNPACKING AND INSTALLATION
Unpack the machine from pluriball and ensure that it has not been damaged during transport.
Packaging dimensions cm: 107 x 37 x 110h.
Packaging type: pluriball.
Packaging weight: about 21.5 KG.
The installation is entirely borne by the buyer. For any technical information (installation specifics,
electrical connection, floor characteristics, electromagnetic compatibility) please refer to this use and
maintenance manual.
4.1 RECOMMENDED INSTALLATION
CLOROFILLA SPOT must be fixed to a concrete base or any other compact and not slatted resistant
material. The recommended technical characteristics are the following.

Pag. 10 di 17
00_15.07.2020
Buratti Meccanica Copyright ©2019
FISCHER ANCHOR CHARACTERISTICS

Pag. 11 di 17
00_15.07.2020
Buratti Meccanica Copyright ©2019
4.2 UNBOXING PROCESS AND START-UP
1) CLOROFILLA SPOT packaging.
1) Free CLOROFILLA SPOT cutting the packaging material (scissors).

Pag. 12 di 17
00_15.07.2020
Buratti Meccanica Copyright ©2019
3)Unscrew the safety nuts (13mm wrench).
3) The assembling is completed.
ATTENTION: Do not use CLOROFILLA SPOT until it hasn’t been fixed to the floor.

Pag. 13 di 17
00_15.07.2020
Buratti Meccanica Copyright ©2019
4.3 ELECTRIC WIRING
CLOROFILLA SPOT operates a voltage of 220 - 230volt 50Hz. Connect the grounding wire, plug
CLOROFILLA’s socket to the mains at 220volt, turn on the master switch and check that the warning
light turns on as well.
ATTENTION:CLOROFILLA SPOT must be connected to a network that complies with legal standards
and must be fixed to the floor. Plug CLOROFILLA SPOT in.
4.4 ELECTROMAGNETIC COMPATIBILY
With the aim to limit any external damage to CLOROFILLA SPOT please follow the following
instructions:
•Every metallic part of CLOROFILLA SPOT must be placed on the floor.
To guarantee the correct functioning, the final user must guarantee that CLOROFILLA SPOT has been
properly placed to the ground.

Pag. 14 di 17
00_15.07.2020
Buratti Meccanica Copyright ©2019
5. MAINTENANCE
Maintenance operations are easy and they can be done by everyone.
5.1. MAINTENANCE OPERATIONS
To guarantee a correct functioning of CLOROFILLA SPOT we recommend to do some easy
maintenance operations. The ordinary CLOROFILLA’s cleaning maintenance can be done using a wet
cloth with a non-aggressive cleaner. For any other maintenance or checks, refer to the chart 1.
Chart 1 – Maintenance
COMPONENT ACTION PERIOD
BASIC STRUCTURE Check the presence of cracks (visual
inspection)
12 months
CENTRAL PIPE Check the presence of corrosions 12 months
BICYCLE SUPPORTS Check the presence of corrosions 12 months
RUBBER TOPS They have to be replaced taking into
account the wear and tear
24 months
PAININTING Visual inspection 24 months
DOME Regular inspection 24 months
ALL THE STRUCTURE Regular inspection
24 months
5.2. CLOROFILLA’S DISPOSAL
In any case of disposal, in order to preserve the environment, divide metallic parts from plastic ones
and hand everything out to the ecologic recycling depot.
ENVIRONMENT: Divide these components and dispose of them into recycling depots.

Pag. 15 di 17
00_15.07.2020
Buratti Meccanica Copyright ©2019
6. ATTACHMENTS
•ELECTRICAL PANEL
•ISTALLATION DRAWING

Pag. 16 di 17
00_15.07.2020
Buratti Meccanica Copyright ©2019

Pag. 17 di 17
00_15.07.2020
Buratti Meccanica Copyright ©2019
BURATTI MECCANICA Srl -
Via Archimede, 535 47521 Cesena (FC)
-
Tel. [phone]
[email protected] www.clorofilla-bike.com
Spot