ProfiScale PRECISE PS 7230 2
EXTRA
+
+
3 V
Introduction
The micrometer screw is a high precision tool intended for measuring
the thickness of a variety of materials and diameters of round and square
profiles. It is handy and easy to use. The micrometer screw is ideal for
example in the workshop or in model making.
Safety instructions
The tool shall not be stored in moist conditions and exposed to splashing
water, rain, dust or persistent sunlight. The battery shall be removed when
unused for a longer period.
Illustration
ON/ OFF···Set button
ABS···in/ mm button
Locking lever
Friction clutch – fine
Spindle drive – rough
Spindle
Opposite piece
Operation
Setup of absolute zero
Press the ON/OFF···Set button to switch the tool on.•
Use the fine friction clutch to close the measurement surfaces.•
Press the ON/OFF···Set button again and hold it for approx. 3 sec.•
The display value is set to 0.000.•
Setup of relative zero
The display can be set to zero in any required position.•
For this purpose, press the ABS···in/mm button briefly.•
The INC symbol is displayed, the value is set to zero•
Switching the unit of measure from metric to inches
Press the ABS···in/mm button and hold it for approx. 3 sec.•
Technical data
Operating range 0 to 25mm / 0 to 1,0inch
Display accuracy 0,001mm / 0,00005inch
Operating environment 0°C to 40° C,
air humidity <85 %
Storage temperature -20°C to 70° C,
air humidity <85 %
Power supply 1 pc 3V button cell CR2032
Lagerungstemperatur -10 bis 60 °C
The tool switches off automatically after approx. 5minutes.
Battery replacement
Incorrect displaying of values (poor readability or no visibility at all) indicates a
weak battery. To replace the battery, turn the battery cover at the back using
a coin in the direction of arrow and replace the old battery by a new one.
Please note that the positive side of the battery must be turned upwards.
Disposal of the tool
Dear customer,
please help us to reduce waste. Should you ever intend to dispose of
this tool, please bear in mind that many components of the tool contain
precious materials, which can be recycled.
Please do not dispose of this tool as common waste, but rather request
information from the responsible authority in your community on the
conditions of collecting electric waste.
Printing and typesetting errors excepted.
We reserve the right to make technical changes.
