Introduction
The CROSS PS 7510 angle laser is handy and simple to use. CROSS PS
7510 projects 2 laser lines at an angle of 90° and is ideal for tile and
wood flooring. You can use it for laying tiles easily and neatly and make
accurate and straight cuts. The integrated spirit levels make aligning easy.
Sucker cups help with fixing on smooth surfaces. The scale allows diagonal
work in steps of 5°.
Illustration
Power switch
Output window for laser beam
Buttons for fixing the sucker cups
Spirit levels
Diagonal with 5° scale
Right angle tip is calibrated with the lasers
Laser warning notice
Safety instructions
Attention – laser radiation
Never look into the beam
EN 60825-1:1994 + A1:2002 + A2:2001
Pmax< 1mW; λ= 650nm
Injuries can occur if the following instructions are not observed:
1. The instructions for use shall be read carefully before using the tool
in order to maintain a safe use. Keep the instructions for use.
2. The warning notice on the tool shall never be blurred or
removed from the tool.
3. Paste the attached warning labels in your language over the original
ones before the initial commissioning.
4. Never point the laser beam at the eyes of other persons or animals.
Do not look into the light beam and do not focus the laser light by
means of optical devices. This can damage the eyes.
5. Prevent children from using the laser meter. They can inadvertently
injure themselves or others.
6. Please always switch the laser off after your work or during longer
intermissions.
7. Let the repairs of the measuring device be made only by a qualified
specialist and using original parts in order to maintain the tool secure
and under warranty.
8. Do not use the tool in an environment with flammable or
explosive gases.
9. Remove the batteries when not using the tool for a longer
period of time.
Warranty
Congratulations!
Thank you for choosing ProfiScale quality measuring technology by BURG-
WÄCHTER. BURG-WÄCHTER offers a warranty of 2 years duration from the
date of purchase. The warranty does not cover damage caused by improper
use, overloading the device or incorrect storage as well as normal wear and
defects that only have an insignificant effect on the value or usability of
the device. The warranty shall be immediately invalidated if unauthorized
persons work on the device. In the event that a warranty claim arises, please
hand over the entire device incl. packaging, description and batteries along
with the sales receipt to your dealer.
Technical data
Length of laser line max. 8m (depending on lighting
conditions)
Accuracy +/- 0,1º
Laser output rating < 1mW
Laser wavelength 650nm
Operating temperature 0°C to 40° C
Power supply 3 batteries 1,5V AA (e. g. LR 6)
Dimensions 150 x 150 x 51mm
Operation
• Place the tool flat on the floor.
• Switch the tool on and off using the button A.
• On smooth surfaces, fix it using the button C.
• Always adhere to the safety instructions.
• Switch the tool off after use, it does not power off automatically.
• Check the position of the tool when working, it is not self-levelling.
Battery replacement
If the laser lines are not visible after power on, open the battery
compartment on the back and replace the batteries.
Disposal
Dear customer,
Please help us avoid unnecessary waste.
Should you intend to dispose of this device at any time, please remember
that many components of this device contain valuable materials, which can
be recycled.
Please be aware that electrical and electronic equipment
and batteries shall not be disposed of as household
waste, but rather collected separately. Please obtain
information on the collecting points for electrical waste
from the responsible authority of you municipality.
If you have any questions concerning the EC declaration
Printing and typesetting errors excepted.We reserve the right to make technical changes.
