Bush Hog 2012 User manual










SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 21
 
 11 ft 9 inches
 (width x length) 12 ft 2 inches x 10 ft (Lift), 12 ft 2 inches x 13 ft 4 inches (Pull)
 3 Point Cat. II & III Standard & Quick Hitch, Center Pull Self Leveling or Semi-Mount, Cat.II & III
 2 inches
 2 to 12 inches
 10 gauge
 7 gauge /10 inches deep
 60 PTO (Pull), 70 PTO (Lift)
 ASAE Category 4
 Rubber Element
 120 Main and 90 Outboard
 540/1000 RPM
 4 Plate PTO Slip Clutch
 Choice of Manual Height Bundle or Hydraulic Cylinder
 Round Pans
 1/2 x 4 inches - Corner Uplift
 15,490 FPM/540 RPM; 15,422 FPM/1000 RPM
 Laminated Tire on Lift and Semi-Mount Models, Laminated Tire or 15 inch Automotive Wheel on Pull Models, Used Aircraft Tire on Pull Type Only
 Adjustable Axle Arms for Row Spacing, Choice of Single or Dual Axles on Pull Models
 Front Belting and Rear Bands (Chains Optional)
 Standard for Pull Models
 2184 lbs (Lift), 2267 lbs (Pull), 2079 lbs (Semi-Mount)
 Single Row Chain Deflector Front and Rear
 1 year limited warranty with a 5 year gearbox limited warranty
 •Sloped Deck • High blade tip speeds • Deep sidebands • Quick detach gearbox shields