Bush IDLCD2205HDV User manual

INSTRUCTION MANUAL
IDLCD2205HDV
The Gold Technical Support Line: 1902 215 259
Personal Product Support
(Charges will apply at $2.95 per minute)
22

-1-
INTRODUCTION
Thank you for buying this Bush product, which is designed to give you many years of
trouble-free service.
You may already be familiar with using a similar unit, but please take time to read
these instructions. They are designed to familiarise you with the unit s many features
and to ensure you get the very best from your purchase.
Your safety and the safety of others is important. Therefore, please ensure you read
the Safety Instructions before you operate this unit.
In the unlikely event that your product fails to work normally, please call the below
Bush warranty number to discuss the problem with one of our qualified service
engineers.
Safety is important
Warranty
Australia
Bush Warranty: 1800 509 394
New Zealand
Bush Warranty: 0800 450 259

1. INTRODUCTION........................................................................1
2. SAFETYINSTRUCTIONS...........................................................3
3. INSTALLATION..........................................................................4
4. REMOTECONTROL................................................................. 11
5. OPERATION.............................................................................13
WALLMOUNTINGINSTALLATIONGUIDLINES.............................4
ACCESSORIES...........................................................................5
FRONT PANEL............................................................................5
KEYBOARD................................................................................6
REAR PANEL..............................................................................6
ANTENNACONNECTION.............................................................7
CONNECTING TO PC..................................................................8
PC PRESET................................................................................9
CONNECTING TO AV EQUIPMENTS...........................................10
BATTERY INSTALLATION......................................................... . .11
KEYSFUNCTION.......................................................................12
BASICOPERATION...................................................................13
TELETEXT.................................................................................14
EPG..........................................................................................15
MENUOPERATION....................................................................16
7. TROUBLESHOOTING...............................................................28-29
8. TECHNICALSPECIFICATION....................................................30
9. WARRANTY.............................................................................31
CONTENTS
-2-
6. DVDOPERATION....................................................................20-27

SAFETY INSTRUCTIONS
-3-
1. Do not use this apparatus near water.
2. Clean only with dry cloth.
3. Do not block any ventilation openings. Install in accordance with the manufacturers
instructions.
4. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
5. Protect the power cord from being walked on or pinched particularly at plugs
convenience receptacles, and the point where they exit from the apparatus.
6. Only use attachments/accessories specified by the manufacturer.
7. Unplug this apparatus during lightning storms or when unused for long periods of
time.
8. Refer all servicing to a qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
9. The apparatus should not be exposed to dripping or splashing and no objects filled
with liquids, such as vases, should be placed on the apparatus.
10. If the television is to be built into a compartment or similar enclosed, the minimum
distances must be maintained. Heat build-up can reduce the service life of your
television, and can also be dangerous.
Never tamper with any components inside the TV, or any other adjustment controls not
mentioned in this manual.
All LCD-TVs are high voltage instruments. When you clean up dust or water drops on
the LCD PANEL or CABINET, the power cord should be pulled out from the receptacle,
then wipe the TV with a dry soft cloth.
During thunder and lighting, unplug the power cord and antenna cord to prevent
damage to your TV.
All repairs to this TV should only be performed by qualified TV service personnel.
ADDITIONAL SAFETY NOTES

INSTALLATION
INSTALLATIONNOTES
This TV canbeconnected to AC 100-240 Volts.50/60Hz.Neverconnect toaDC
supply or anyotherpowersupply.
Locatethe TV in theroomwherelightdoesnotstrikethescreen . Totaldarkness or a
reflection on thepicturescreencancauseeyestrain.Softandindirectlighting is
recommendedforcomfortableviewing.
Allowenoughspacebetweenthe TV andthewall to permitventilation.
Avoidexcessivelywarmlocations to preventpossibledamage to thecabinet or
prematurecomponentfailure.
Do notcover the ventilationopeningswhenusingthe TV.
WALLMOUNTINGINSTALLATIONGUIDELINES
Thistelevisioncanbewallmounted as follows:
1.PlacetheLCD Televisionontoasolidsurface.Pleaseplacesomesoftmaterial to
overthefrontofthescreentoavoidanydamage.
2.Removethescrewsfromthelowerpartofthetelevision,wherethebasejoins to the
TV, andtakeawaythestand(putthestandsomewheresafeforfutureuse).
3.Usethefourscrewsprovided to fixthe TV ontoawallmountingbracketviathe 4
VESAstandardholes on theback of the television.
-4-
001 mm
100 mm

2
1
3
4
FRONT PANEL
AC Power Cord.........................1
Infrared Remote Control............1
User s Manual ........................ 1
Battery(AAA)........................... 2
ACCESSORIES
INTSTALLATION
1
ENTER
2 3
4 5 6
7 8 9 0
+
CH
_
+
_
VOL
POWER MUTE
NICAM
RECALL
TVMENU INPUT
DVBMENU SOUND EXIT
PIC
SLEEP ASPECT
TEXTDISPLAYSOURCE
INFO FAV EPG
REVEAL HOLD LIST INDEX
SUBPAGE SIZE AUDIO SUBTITLE
1: Remote control sensor.
2: Indicator LED: GREEN POWER ON.
RED STANDBY.
3: Key board(see next page).
4: Power: Press this button to the status
of , the unit will turn ON. Press
this button to the status of , the
unit will turn OFF.
30 30
-5-

INSTALLATION
KEY BOARD
1.SOURCE
To display the input source menu.
2.MENU
To display main MENU.
3.CH+/CH-
In TV mode to change the channel up
and down.
In MENU mode, to select the menu items .
In standby mode, it can turn on the TV.
4.VOL+/VOL-
To adjust sound level.
In MENU mode,to select the menu items.
REAR PANEL
-6-
SOURCE
MENU
CH+
CH-
VOL+
VOL-
SOURCE
MENU
CH+
CH-
VOL+
VOL-
All the terminals are(from left to right):
AC POWER SOCKET, HDMI input,VGA ,PC AUDIO input,AV ,S-VIDEO,Rear Audio input,
YPbPr input, ANTENNA SOCKET,
Note: 1.AV,S-VIDEO and YPbPr share the Rear Audio input channel.
2. When HDMI port get DVI signal,the PC Audio channel will change to receive the audio
from HDMI port.
Coaxial SPDIF OUTPUT,
100-240V~ 50/60Hz
AC-INPUT AUDIO
VGA INPUT
VGA INPUT
L
R
AV
S-VIDEO
HDMI ANT
AUDIO
INPUT
Pr
Y
Pb
YPbPr
INPUT
SPDIF OUTPUT
OPEN/CLOSE
PLAY/PAUSE
STOP
NEXT
USB
PREV
DVD SIDE PANEL
USB
Caution:
In DVD mode, press DVD/USB button
on the Remote control, insert a USB
or a Mp3 player with USB interface to
play the Mp3, JPEG and Mp4 files.
When using USB function, please do
not insert in the wrong direction, or else
it will damage the unit.

ANTENNA CONNECTION
INSTALLATION
Note:
Aerial connections:IEC(female).
Input impendance:75 unbalanced.
-7-

STEPS:
CONNECTING TO PC
Be sure both the TV and computer are set to Power off.
1.Connect VGA and audio cable.
2.Connect the power cord.
3.Power on the TV, switch the input source to VGA mode.
4.Power on the PC.
This sequence is very important.
INSTALLATION
-8-
PC Audio
Power cord
VGA cable
100-240V~ 50/60Hz
AC-INPUT AUDIO
VGAINPUT
VGAINPUT
L
R
AV
S-VIDEO
HDMI ANT
AUDIO
INPUT
Pr
Y
Pb SPDIF OUTPUT
YPbPr
INPUT

PRESET MODE(recommended resolution is 1024*768@60Hz)
INSTALLATION
PC PRESET
-9-
1
2
3
4
5
6
7
8
9
720*400
640*480
800*600
800*600
800*600
800*600
1024*768
1024*768
1024*768
70
60
56
60
75
72
60
70
75
31.47
31.47
35.156
37.88
46.88
48.08
48.36
56.48
60.02
RESOLUTION V.Freq.(Hz) H.Freq.(KHz)

INSTALLATION
CONNECTING TO AV EQUIPMENTS
-10-
It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder,
video game or stereo system
YPbPr can support these video fomats:480i,576i,480p,576p,720p,1080i,1080p.
as well as a number of other electronic items.
This TV provides one group of AV, one S-Video,one group of YPbPr for convenient
connection to VCR, DVD or other video equipment. Please refer to the owner s manual
of the equipment to be connected as well.
You can use the input terminals on TV set rear as follows.
To audio
outputswith
terminal
VIDEO EQUIPMENT
utpu
To audio o ts
with S-video
term inal
VIDEO EQUIPMENT
T
outp
oS-VIDEO
ut
Yellow (video)
White(audio L)
Red(audio R or Pr)
Y
W
R
R
W
Y
W R
output
To video
Blue(Pb)
Green(Y)
B
G
VIDEO EQUIPMENT with YPbPr
Y W R
W R
GBR
GBR
Y
From Coaxial SPDIF
output
VIDEO RECORDER
Y
with SPDIF Input
term inal
100-240V~ 50/60Hz
AC-INPUT AUDIO
VGA INPUT
VGA INPUT
L
R
AV
S-VIDEO
HDMI
ANT
AUDIO
INPUT
Pr
Y
Pb SPDIF OUTPUT
YPbPr
INPUT

REMOTE CONTROL
-11-
Remark:
BATTERY INSTALLATION
1. Remove the battery cover.
2. Inserting the 2 AAA 1.5V batteries making sure the polarity (+ or -) of the batteries
matches the polarity marks inside the unit.
3. Mount the battery cover. Replace with new batteries when the TV set begins to show
the following symptoms: Operation is unsteady or erratic. Sometimes the TV set does
not function with Remote Control Unit.
1) Alkaline Battery Recommended.
2) Remove batteries when they are exhausted or if the remote control is not to be used for
an extended period of time.

REMOTE CONTROL
KEYS FUNCTION
-12-
1
OK
2 3
4 5 6
7 8 9 0
+
CH
_
+
_
VOL
POWER MUTE
TV AUDIO
RECALL/GOTO
TV MENU SOURCE
DVD MENU SOUND EXIT
PIC
SLEEP ASPECT
TEXTTV/RADIODVD SETUP
EPG FAV INFO
DISPLAY DVD AUDIO
ANGLE
PBCDVD/USB TITLE
SUBPAGE SIZE MIX
REVEAL HOLD LIST INDEX
RETURN SUBTITLE
FREEZE
2
3
4
1
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
1: :To set the TV to standby or power on.
2: :For direct access to channels.
3: :To display TV menu.
4: :To move within the menu.
6: :To adjust sound level.
7: :To switch picture mode.
8: :Set timer to turn off the TV.
10: :In DVB mode, it is used to switch
between digital TV channels and radio
stations. Display/remove the programme
information.
11: :To display information about the
program being viewed and what's on next in
DTV mode.
12: :To access your favourite channels list
in TV or DTV mode.
14: :(page25)
19: :(page 14)
20: :To disable or enable the sound output.
21: :To select the available audio
language of TV programs .
22:: : To access the previously
viewed channel.
23: : To select input source.
24: :To confirm selection.
25: :To return to the previous menu
or exit menu.
26: :To switch sound mode.
27: :To access the next or previous
channels.
28: : To change picture aspect ratio.
29: :To enter or exit TELETEXT.
30: :To display information about the
channel being viewed or further information
about the program when in small EPG
screen in DTV mode.
35: :To switch between different
subtitles in DTV mode.
37: :To freeze the picture.
POWER
NUMERIC KEY
TV MENU
CURSOR
VOL+/-
PIC
SLEEP
TV/RADIO
EPG
FAV
TITLE
TELETEXT KEYS
MUTE
TV/AUDIO
RECALL/GOTO
SOURCE
OK
EXIT
SOUND
CH+/CH-
ASPECT
TEXT
INFO
SUBTITLE
FREEZE
37
NOTE: For the function of DVD button,please
refer to the DVD part at the back of this
instruction book (page 25-26).

OPERATION
-13-
BASIC OPERATION
TURN ON THE UINT
CHANNEL SEARCH
WATCHTVPROGRAM
CHANGE VOLUME
PIC
CHANGE SOUND MODE
SOUND
VIEW CHANNEL INFORAMTION
MUTE
CHANGE INPUT SOURCE
SOURCE
Press the POWER button on the remote control to switch on the power. The power
indicator will light up in green colour, press the POWER button again to switch off
the power, and the indicator will change to red.
Press the VOL - or VOL + button to adjust the volume level. Press the VOL - button
repeatedly to decrease the volume; press the VOL + button repeatedly to increase
the volume from 0 to 100.
Press the button repeatedly to cycle through the available video picture modes.
Press the button repeatedly to cycle through the available sound modes.
Press the INFO button to display the preset channel information.
Press the button then press the buttons to select the input source and
press the OK button to confirm.
Press the SOURCE button on the remote control to select the TV or DTV input mode,
and press the OK button to confirm.If you are using the unit for the first time, an
Installation Guide menu will be displayed to guide you through
Press the CH- or CH+ button to select the previous or next channels or press the 0-9
buttons to enter a channel number directly.Press CH.LIST button to view the channels
list and press the buttons to select the desired TV programmes.
Press the button to cut off the sound output, press this button again to resume
sound output.
MUTE
the channel scan,
Use the remote control to finish channel scan (you can also refer to CHANNEL MENU
(page 16) in this manual for the channel scan operation).
CHANGE PICTURE MODE
EXIT MENU
OK
NEW INSTALLATION
Menu Language English
Auto Tuning

OPERATION
-14-
E
TEXT
SELECTING A PAGE
DIRECT ACCESS
TO THE ITEMS
INDEX
SUB PAGE
HOLD
REVEAL
Press: You will obtain:
TELETEXT
Enter the number of the page required using the 0 to 9
up/down. Example: page 120, enter 120. The number is
displayed top left, the counter turns and then the page is
displayed. Repeat this operation to view another page. If
the counter continues to search, this means that the page is
not transmitted. Select another number.
Coloured icons are displayed at the bottom of the screen. The 4
coloured buttons on the remote control are used to access the
items or corresponding pages. The coloured icons flash when
the item or the page is not yet available.
This returns to the contents page (usually page 100).
Certain pages contain subpages which are automatically
displayed successively. This key is used to stop or resume sub-
page acquisition. The indication appears top left.
To freeze the page.
To display or hide the concealed information (games solutions).
This is used to enter or exit teletext mode. The summary
appears with a list of items that can be accessed. Each item
has a corresponding 3 digit page number. If the channel
selected does not broadcast teletext, the indication 100 will
be displayed and the screen will remain blank (in this case,
exit teletext and select another channel).
Teletext is an information system broadcast by certain channels which can be
consulted like a newspaper. It also offers access to subtitles for viewers with
hearing problems or who are not familiar with the transmission language (cable
networks, satellite channels, etc.)
SIZE
To zoom the page.
LIST
To save and display your favourite pages.
MIX
To mix teletext with video pictures.

OPERATION
-15-
EPG (Electronic Programme Guide)
DTV
800 France 2
802 France 5
803 ARTE
804 LCP
805 France 3
801 France 4
PROGRAMME GUIDE DTV 801 France 4
1555.1625 Last Exit
20 Feb 2006 16:07
20 Feb
16:00 17:00
Information
Last Exit
Programme 2
Programme 3
Programme 4
Programme 5
EXIT Reminder
OK
INFO
Movie 1
DATE
Schedule
The EPG (Electronic Programme Guide) menu is used to look at what is
being broadcast on a DTV or Radio channel at a later point in time.
he detailed programme
information of the channel currently being viewed will be displayed.
Press the EPG button to access the EPG menu, t
To see what is going to be broadcast after the current programme, press the
button to view future programmes and press the button to return towards
the programmes televised at the current time.
To view a different channel, press the or button. To book a wanted
programme for later watching, press the blue button to enter Reminder menu.
Press the green button to enter the schedule list.
To exit the EPG menu and watch the selected channel, press the
or button.
EPG
EXIT

OPERATION
-16-
EXIT MENU
OK
CHANNEL
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
1.CHANNEL MENU
The first item of the menu is CHANNEL menu( for TV source only).
You can search channels and edit programs here.
1).Auto Tuning:Search all the channels automatically(ATV, DTV & Radio)
Press the buttons to select country then press the buttons to select start or
cancel.
Press the OK button to start or exit auto tuning .
NOTE: All the channels including ATV, DTV and Radio can be tuned at the one time .
2).DTV Manual Tuning: You can select a DTV channel then find the program in this
channel.
Pls press the buttons to select the channel , then press the OK button to search
the programs .
NOTE: Bad Normal Good refers to the signal intensity.
Please select country first
then select Start to update info
Country selection
Start Cancel
Australia
DTV Manual Tuning
UHF CH 30
Please select channel then
pressOKtosearch
Bad Nomal Good
EXIT MENU
MENU OPERATION
OK

OPERATION
-17-
icon will disappear.
3). ATV Manual Tuning :You can change the sound system to search the analog
TV channels and fine tune the channels, then store the channels you selected.
Press the red button to store the channel after manual tuning .
4). Programme Edit: You can edit programs in the following items.
Delete
Press the red button, it will shows a red delete cursor.
Press the buttons to choose the program.
Press the red button again, the program will be deleted.
Rename
You can only rename ATV programs.
Move the cursor to the program, press the green button to rename the program,
Press the TV MENU button to exit edit , Press the EXIT button to exit the menu.
Move
Move the cursor to the program, press the yellow button, it will show a yellow
cursor, Press the buttons to move the program.
Skip
Press the buttons to choose the program, then press the blue button to skip
this program, the icon will show on the right side of the program.
Choose the skipped program and press the blue button again to cancel skip, the
FAV
Press the buttons to choose the program, press the FAV button, it will show
on the right side of the program.Choose the FAV program and press the FAV button
again to cancel FAV, the icon will disappear .
SKIP
SKIP
ATV Manual Tuning
Storage To
EXIT SAVE
System BG
Current CH 1
Search
Fine-Tune
Skip Yes
Frequency 255.25MHz
Once your favourite group is created,you can press the FAV button to quickly access
your favourite channel list.
Storage To:
System:
Current CH:
Search:
Fine-Tune:
Skip:
To select the channel number you want to save to.
To select the TV sound system.
To select the current channel.
To search backward/forward.
To fine tuning when the signal level of current channel is weak.
When it set to Yes, the current channel will be skipped while you are
changing channels by pressing the CH+ or CH- buttons.

-18-
The second item of the menu is PICTURE menu.
You can adjust picture effect here, including contrast, brightness and colour as
well as other picture functions.
Press the buttons to select items and press the buttons to adjust.
EXIT MENU
OK
PICTURE
Picture Mode Dynamic
Contrast
Brightness
Colour
Sharpness
Tint
70
70
70
70
0
OPERATION
NOTE:
1).Tint is available in NTSC system only.
2).PC Setup is available in VGA mode only.
EXIT MENU
OK
SOUND
Sound Mode Standard
Treble
Bass
Balance
Surround Sound Off
3.SOUND MENU
The third item of the menu is the SOUND menu.
You can adjust the sound effect here, including treble, bass and balance as well
as other sound functions.
Press the buttons to select and press the buttons to adjust.
50
50
0
2. PICTURE MENU
EXIT MENU
OK
PICTURE
Colour Temp Normal
Red
Green
Blue
Aspect Ratio 16:9
Noise Reduction ON
70
70
70
EXIT MENU
OK
PICTURE
PC Setup
EXIT MENU
OK
PICTURE
Auto Adjust
H-Position
V-Position
Clock
Phase
70
70
70
70
(1) (2)
(3) (4)

OPERATION
-19-
EXIT MENU
OK
TIME
Clock
Off Time Off
On Time Off
Sleep Timer Off
Auto Sleep Off
Time Zone New South Wales GMT +10
4.TIME MENU
The forth item of the menu is the TIME menu.
You can adjust the clock, power on/off time, sleep timer and time zone as well as
other time clock functions.
Press the buttons to select and press the buttons to adjust.
NOTE:
When the Auto Sleep is set to ON, the unit will turn to standby mode automatically
if there is no signal input for a period of about 15 minutes.
EXIT MENU
OK
DEFAULT
Menu Language English
Audio Language English
Subtitle Language English
Hearing impaired Off
Country Australia
5.DEFAULT MENU
The fifth item of the MENU is the DEFAULT menu.
In this menu, you can adjust the Hearing impaired function only.