Bush LCD40883 F1080PS Manual

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105
Issue 1 - 9/2/11
40” LCD TV
Installation & Operating Instructions - Please keep for future reference
529/8374
IMPORTANT - Please read these instructions fully before installing or operating
These instructions contain important information which will help you get the best from your
television and ensure safe and correct installation and operation.
For any help concerning set up and use of your TV please call the
Customer Helpline: 0044 845 604 0105
Lines open: 9am - 8pm Monday to Saturday and 10am - 4pm Sunday
LCD40883 F1080PS
APPROVED

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105
Contents
Contents 2
Contents 3-6
Preparation 4
Intended Use 4
Power source 4
Positioning the TV 4
Power cord and plug 4
Moisture and Water 5
Ventilation 5
Heat sources and Flames 5
Headphone Volume 5
Wall Mounting (optional) 5
LCD Screen 5
Cleaning 5
Batteries 5
Replacement Parts 6
Servicing 6
Taking out of service and storing 6
Connection to a Television Distribution System
(Cable TV etc.) from Tuner 6
Symbols in this Instruction Book 6
Support 7
Getting Started 8-14
TV - Features 8
Viewing remote control - TV 9
Getting Started 10
Attaching the Stand 10
Getting Started 11
TV - Control buttons (left side) 11
Aerial connection 12
Power connection 12
Remote control - Inserting batteries 12
Wall Mounting 12
Switching the TV On and Off 12
Switching the TV On 12
Switching the TV Off 12
Operation using TV control buttons 13
Operation using Remote control buttons 13
Initial set up 14
General operation 14
Information Banner 14
Connections 15-19
Back connections explained 15
Left side connections explained 16
HDMI Connections 17
SCART Connections 17
VGA Connections 17
Side AV Connections 18
Using a Conditional Access Module 18
USB Connections 19
Basic Features 20-28
How to navigate menus - Selecting source 20
Electronic programme guide (EPG) 20
General Operation 21
Displaying Subtitles 21
Zoom Modes 21
Using Main Menu Screen 21
Conguring Date/Time Settings 21
Source Settings 21
Audio Language 21
Basic Features 22
Navigating Channel List 22
Moving a Channel 22
Deleting a Channel 22
Renaming a Channel 22
Locking a Channel 22
Sorting Channel List 22
Language Settings 24
Language Settings 24
Other Functions and Features 25
Favourite Mode 25
Conditional Access 25
Setting Sleep Timer 25
Setting Programme Timers 25
Editing a Timer 25
Deleting a Timer 25
Picture Controls 26
Conguring Picture Settings 26
Operating Picture Settings Menu Items 26
Picture Settings Menu Items 26
PC Picture Settings Operation 26
Sound and Source Settings 27
Conguring Sound Settings 27
Sound Settings Menu Items 27
Conguring Source Settings 27
Other Controls 28
Operation 28
Other Settings Menu Items 28
2

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105
Model number
BUSH DVB-T LCD40883 F1080PS
Contents
Advanced Features 29-32
Media Browser 29
Starting Media Browser 29
Media Browser Conguration 29
Operation 29
View Style 29
Slide Show Interval 29
Show Subtitle 29
Subtitle Language 29
Subtitle Position 29
Subtitle Font Size 29
Loop / Shufe during Playback 29
Media Browser - continued 30
Viewing Videos via USB 30
Video Playback Screen 30
Subtitle Time Correction 30
Viewing Photos via USB 30
Displaying Photos in Slideshow Mode 30
Playing Music via USB 30
Setting the channels 31
Accessing Installation Menu 31
Automatic Channel Scan (Retune) 31
Manual Channel Scan 31
Analogue Fine Tune 31
First Time Installation 31
Clear Service List 31
Parental Control 32
Other Information 33-36
Teletext 33
Analogue Teletext 33
Digital Teletext (for the UK only) 33
Specications 34
Other Information 35
Plug replacement - UK and Ireland only 35
Other Information 36
Product Support 37-42
Trouble shooting 37
Disposal information 38
Supported DVI Resolutions 38
Supported File Formats for USB Mode 39
AV and HDMI Signal Compatibility (Input Signal
Types) 39
PC Input Typical Display Modes 40
Denitionofimportantterms-TV 41
Software Upgrade 42
Guarantee 43
3

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105
Safety Information
IMPORTANT - Please read these instructions fully before installing or operating
Preparation
Place the device on a solid even surface. For ventilation,
leave a free space of at least 10 cm all around the
set. To prevent any fault and unsafe situations, do not
place any objects on top of the set. Use this device in
moderate climates.
Operation temperature and operation humidity:
5ºC up to 45ºC, 85% rel. humidity max. (not blocking
ventilation openings).
Intended Use
This device is used to receive and display TV
programmmes.The different connection options make
an additional expansion of the reception and display
sources possible (various external devices). This device
is only suitable for dry interior use. This appliance is
intended solely for private domestic use and may not
be used for industrial and commercial purposes. We
exclude liability in principle, if the device is not used
as intended, or unauthorized modications have been
made. To operate your LCD TV in extreme ambient
conditions may cause the damage of the device.
WARNING: Never let people (including children)
with physical, sensory or mental abilities or lack of
experience and / or knowledge unsupervised use
electrical device!
Children may not recognize dangers right! The
swallowing of batteries can be fatal. Keep batteries
always out of reach of small children. If a battery is
swallowed, seek immediate medical attention. Keep
the packaging lms out of reach of children, there is a
risk of suffocation.
Power source
• The TV should be operated only from a 220-240V
AC, 50 Hz outlet.
• Warning: Do not leave your TV in standby or
operating mode when you leave your house.
The lightning ash with arrowhead symbol, within
an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufcient magnitude to constitute a risk of
electric shock of persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK,DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK,DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK,DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Positioning the TV
• For ventilation, please leave a clear space of at
least 10cm all around the TV.
•Do not block the ventilation openings.
•Do not place the TV on sloping or unstable
surfaces, the TV may tip over.
• To prevent damage to the TV, do not place any
objects on top of the TV.
• Only use the TV in moderate climates.
Power cord and plug
• The power cord plug should be easily accessible.
In case of storms and lightning, when going on
holiday, or when the TV is not used for a long
period of time disconnect the power cord from the
mains power socket.
• The mains plug is used to disconnect TV set from
the mains and therefore it must remain readily
accessible.
•Do not place the TV, furniture, etc. on the power
cord or pinch the cord.
• Handle the power cord by the plug, do not unplug
the TV by pulling the power cord.
• Never touch the power cord/plug with wet hands as
this could cause a short circuit or electric shock.
• Never make a knot in the power cord or tie it with
other cords.
• Power cords should be placed in such a way
that they are not likely to be stepped on or driven
over.
• A damaged power cord/plug can cause re or give
you an electric shock. When damaged it must be
replaced, this should only be done by qualied
personnel.
Accessories Included
4

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105
Safety Information
IMPORTANT - Please read these instructions fully before installing or operating
Moisture and Water
•Do not use this TV in a humid or damp place (avoid
bathrooms, the sink in the kitchen, etc.
•Do not expose this TV to rain or water, as this may
be dangerous.
•Do not place objects lled with liquids, such as
ower vases, on top of the TV. Avoid from dripping
or splashing.
• If any solid object or liquid falls into the cabinet,
unplug the TV and have it checked by qualied
personnel before operating it any further.
Ventilation
• The slots and openings on the TV set are intended
for ventilation and to ensure reliable operation.
• To prevent overheating, these openings must not
be blocked or covered in anyway.
Heat sources and Flames
•Do not expose the TV to direct sunlight or other
heat sources.
• The TV should not be placed near to
open ames and sources of intense
heat such as an electric heater.
• Ensure that no open ame sources,
such as lighted candles, are placed on top of the
TV.
Headphone Volume
• Excessive sound pressure from earphones
and headphones can cause hearing loss,
please take care.
Wall Mounting (optional)
• To prevent injury, this TV must be securely attached
to the wall in accordance with the installation
instructions (if the option is available).
LCD Screen
• Occasionally, a few non-active pixels may appear
on the screen as a fixed blue, green or red
point. Please note that this does not affect the
performance of your product.
• Take care not to scratch the screen with ngernails
or other hard objects.
Cleaning
• Before cleaning, unplug the TV from the wall
socket.
•Do not use liquid or aerosol cleaners. Only use a
soft, dry cloth.
Batteries
• Warning: Incorrect installation of
batteries may cause battery leakage
and corrosion, resulting in damage to
the remote control.
•Do not mix old and new batteries, or
batteries of different types.
•Do not dispose of batteries in a re.
•Do not dispose of batteries with normal household
waste, take to a local recycling centre.
CAUTION: Insert the batteries / rechargeable
batteries in the correct polarity. Don´t try to recharge
non rechargeable batteries and under no circumstances
throw them into re. Danger of explosion. Do not use
unequal batteries (old and new, Alkaline and carbon,
etc.) simultaneously. If you will not use the device for
a long time, remove the batteries and store the device
in a dry and dust free place. Improper use of batteries
may cause an explosion or leakage. If the batteries have
leaked, use gloves and clean the appliance thoroughly
with a dry cloth! Batteries should not be exposed to
heat, such as sunshine, re or the like.
Accessories Included
5

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105
Replacement Parts
When replacement parts are required, make sure that
the service technician has used replacement parts,
which are specied by the manufacturer or have the
same specications as the original one. Unauthorised
substitutions may result in re, electrical shock or other
hazards.
Servicing
• Warning: Risk of electric shock, do not attempt
to repair, service or modify this TV yourself. Contact
the manufacturer, their approved service agent or
the Customer Helpline: 0845 604 0105.
Taking out of service and storing
Unplug the TV from the mains and pack the TV in an
appropriate cardboard box. Remove the batteries from
the remote control and pack the remote control to the
TV set.
NOTE: The TV set should be stored in a dry and
dust-free room.
Connection to a Television Distribution
System (Cable TV etc.) from Tuner
Device connected to the protective earthing of the
building installation through the mains connection or
through other apparatus with a connection to protective
earthing-and to a television distribution system using
coaxial cable, may in some circumstances create a
re hazard.
Connection to a cable distribution system has therefore
to be provided through a device providing electrical
isolation below a certain frequency range (galvanic
isolator, see EN 60728-11).
Safety Information
IMPORTANT - Please read these instructions fully before installing or operating
Symbols in this Instruction Book
The following symbols are used in the Instruction
Book as a marker for restrictions and precautions and
safety instructions. Note such information for security
reasons.
WARNING
If you do not pay attention to such a marked warning, it
can cause serious injury or death. Note these warnings
strictly, in order to ensure a safe operation.
CAUTION
Such a precaution is marked, you should take up
or note, to avoid injury or property damage. Note
these instructions strictly, in order to ensure a safe
operation.
IMPORTANT
Warnings on the appliance and restrictions are displayed
like this. Read this information strictly in order to operate
the system correctly and avoid damage.
NOTE: Information about the operation and
additional explanations are marked like this. To be
aware of such information is recommended to ensure
that the functions can be used optimally.
Accessories Included
6

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105
Support
The Argos Technical Helpline is here to help
Technical experts are available 7 days a week
•Simplehelpandadviceonsettingupyourdigital
equipment (image).
•Guidanceonconnectingotherdevicestoyour
television such as a DVD player, Sky, home cinema
system or a games console.
•Orderspareparts,includingthatlostremote
control.
•Anyothertechnicalissuesyoumayneed
assistance with.
Call us today: 0044 845 604 0105
Local call rates applies*
Lines open 9am-8pm Monday to Saturday and 10am-4pm Sunday.
*Calls to Argos enquiry lines may attract a charge and set up fee from residential
lines depending on your call plan/tariff. Mobile and other providers costs may vary,
see www.bt.com/pricing for details.
For Security and training purposes, telephone calls to and from customer service
centres maybe recorded and monitored. Calls from Republic of Ireland will attract
international call charges.
7

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105
• Remote controlled colour LCD TV.
• Fully integrated Terrestrial digital TV (MPEG4)
• HDMI connectors for digital video and audio.
This connection is also designed to accept high
denition signals.
• USB input.
• 1000 programmes (analogue+digital).
• OSD menu system.
• Integrated tuner MPEG4 compatible.
• Scart socket for external devices (such as video,
video games, audio set, etc.).
• Stereo sound system. (German+Nicam)
• Teletext, fastext, TOP text.
• Headphone connection.
• Automatic programming system.
• Forward or backward manual tuning.
• Sleep timer / Child lock.
• Automatic sound mute when no transmission.
• NTSC playback.
• AVL (Automatic Volume Limiting).
• Auto power down.
• PLL (Frequency Search).
• PC input.
• Plug&Play for Windows 98, ME, 2000, XP, Vista,
Windos 7.
• Game Mode
Remote Control
Batteries: 2 x AAA
Instruction Book
Quick Start Guide
Getting Started
TV - Features
Accessories included
Optional Accessories
Wall mount bracket
NOTE:You should check the accessories after
purchasing. Make sure that each accessory is
included.
8

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105
Getting Started - TV
Viewing remote control - TV
V
V
SCREEN LANG
SUBTITLE
PIP
MENU RETURN
OK
SOURCE FAV PRESETS SLEEP
?
INFO EPG
V+
V- P-
P+
1234
6
5
9
7 8
0
V
8
9
10
11
15
28
29
12
13
14 16
17
27
26
25
20
23
22
21
19
18
1
2
3
4
5
6
7
24
30
1. Standby
2. Mono/Stereo - Dual I-II / Currrent Language (in DVB
channels)
3. Image size
4. Green button
5. Red button
6. Numeric buttons
7. Teletext / Mix(in TXT mode)
8. Cursor Left
9. Menu on-off
10. AV / Source selection
11. Favourite Mode Selection(in DVB channels)
12. Volume Up
13. Info / Reveal (in TXT mode)
14. Mute
15. Volume Down
16. Programme Down / Page up(in DVB channels)
17. Electronic programme guide(in DVB channels)
18. Programme Up / Page down(in DVB channels)
19. Sleep Timer
20. Picture mode selecion
21. Okay (Conrm) / Hold (in TXT mode)/ Edit Channel List
22. Cursor Down
23. Exit / Return / Index page (in TXT mode)
24. Cursor Right / Subpage (in TXT mode)
25. Cursor Up
26. Previous programme
27. Yellow button
28. Blue button
29. No function
30. Subtitle on-off (in DVB channels)
9

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105
Getting Started
Attaching the Stand
1. Stand is placed on a at surface (g.1).
2. To install the TV on the wall, rst of all, foot
assembly should be removed. Unscrew the 4 screws
that attach the foot assembly to the panel and
remove the foot assembly from the panel (g.2).
g.1
g.2
10

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105
Standby-LCD
1
2
3
4
11
Getting Started
TV - Control buttons
1. Standby ( ) button
Turns the TV on when in standby mode or turns
the TV off into standby mode.
2. TV/AV button
Changes the operation of “Up” and “Down”
buttons.
3. Programme Up/Down buttons
Moves up/down a channel.
4. Volume Up/Down buttons
Increases/decreases the volume.
NOTE:If you switch on your TV via PROGRAMME
UP/DOWN buttons on the remote control or on the
TV set, the programme that you were watching last
will be reselected.
NOTE:Press “” / “ ”buttons at the same
time to view main menu.

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105
Getting Started
Aerial connection
Connect the “aerial” or “cable TV” plug to AERIAL
INPUT (ANT.) socket located on the back of the
TV (g.1).
Switching the TV On and Off
Switching the TV On
With power cord plug connected to the mains power
socket, the TV is in ‘Standby’ mode.
To switch the TV on from standby mode:
Connect the power cord to the 220-240V AC 50 Hz.
Then the standby LCD lights up. (The led will blink
during the standby On/Off)
To switch on the TV from standby mode either:
a. Press the “ ” button, P+ / P- or a numeric button on
the remote control.
b. Press the “ ”, - or + button of the TV.
By either method the TV will switch on.
AAA/R3 x 2
Batteries
Switching the TV Off
Press the “ ” button on the remote control or press
the “ ” switch on the TV, the TV will switch to standby
mode.
To turn off the TV completely, remove the power
cord plug from the mains power socket.
NOTE: When the TV is in standby mode, the
standby LCD can blink to indicate that features such as
Standby Search, Over Air Download or Timer is active.
NOTE: If you switch on your TV via P+/- buttons on
the remote control or +/- on the TV set, the programme
that you were watching last will be reselected.
HDMI 1
HDMI 2
SPDIF
Coax.OUT
HDMI 1
HDMI 2
SPDIF
Coax.OUT
g.1
+
+
--
g.2
Power connection
IMPORTANT :The TV set is designed to operate on
220-240V AC, 50 Hz.
Please note: After unpacking, allow the TV to reach
ambient room temperature before connecting the TV
to the mains power socket.
Connect the power cord plug to the mains power
socket.
The LCD on the front of the TV then lights up, this
indicates that the TV is in ‘Standby’ mode.
Remote control - Inserting batteries
Remove the battery cover on the back of the remote
control, gently push down and pull backwards at the
same time as shown.
Insert two AAA/R3 or equivalent type batteries. Ensure
the batteries are inserted the correct way and replace
the battery cover (g.2).
NOTE: When the remote control is not going to
be used for long periods of time, the batteries should
be removed. Otherwise the remote control may be
damaged, caused by battery leakage and corrosion.
Wall Mounting
When wall mounting please ensure you use a compatible
wall mount (not supplied). This TV conforms to the VESA
mounting specications and is 400 x 200mm.
12

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105 13
Getting Started
Operation using TV control buttons
The main menu OSD (On Screen Display) cannot
be displayed using the TV control buttons.
The “ ”/“ ” buttons will function as volume
up/down as default. Even if you set other functions
for these buttons, the “ ”/“ ” buttons will
return to volume control after a short while.
Volume Setting
Press “ ” button to decrease volume or “ ”
button to increase volume, so a volume level scale
(slider) will be displayed on the screen.
Programme Selection
Press “P/CH +” button to select the next
programme or “P/CH -” button to select the
previous programme.
AV Mode
Hold the TV/AV button for a few seconds, the
“Source” OSD will be displayed.
Operation using Remote control buttons
The remote control is designed to control all the
functions of the model you selected.
Volume Setting
Press “V +” button to increase the volume. Press
“V -” button to decrease the volume. A volume level
scale (slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
Press P- button to select the previous programme.
Press P+ button to select the next programme.
Programme Selection (Direct Access)
Press number buttons on the remote control to
select programmes between 0 and 9. The TV will
switch to the selected programme.
To select programmes between 10-500 (IDTV)
or 10-199 (analogue), press the number buttons
consecutively.
SCREEN LANG
MENU RETURN
OK
SOURCE FAV
PRESETS SLEEP
?
INFO EPG
V+
V- P-
P+
1234
6
5
9
7 8
0
PIP
SUBTITLE

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105
Getting Started
Initial set up
When turned on for the rst time, language selection
message is displayed (g.1). Press the “ ” or “
” button to highlight the required language, press OK
button to select. “First Time Installation” appears. Use“
” or “ ” button to set the required country, and press
“” button to select “Teletext Language”. Use “ ” or
“ ” button to set the “Teletext Language” and select
“Scan Encrypted” using “ ” or “ ” button. Set “Scan
Encrypted” using “ ” or “ ” button (g.2).
Press OK button on the remote control to continue and the
conrmation screen will be displayed on the screen (g.3).To
start automatic select Yes (to cancel select No), highlight
the item required using the “ ” or “ ” button and press
OK button to select. The search will start (g.4).
IMPORTANT: Do not turn off the TV while
“First Time Installation” is in operation.
After all the available stations are stored, Channel List
will be displayed on the screen. If LCN (*) is available in
your country, a message appears on the screen which
asks you if you want to sort the channels according to
LCN. In some countries, the order of the channels is
arranged automatically by the broadcaster. This is called
logical channel number (LCN). If the selected country
has LCN support, the channels will be enumerated one
by one, beginning from number 1. You cannot move
any programme to a position after the last saved one.
If you try to do this, both programmes will change their
places. If LCN support is not available, you can move
the channels as you wish.
Press OK button to quit channel list and watch TV.
(*) LCN is the Logical Channel Number system that
organizes available broadcasts in accordance with a
recognizable channel sequence.
Information Banner
Whenever you change channel using the P-/P+ buttons
or the numeric buttons, the TV displays the broadcast
picture along with an information banner at the bottom
of the screen. The information banner can be displayed
at any time while watching TV by pressing the INFO
button on the remote control (g.5).
Hint: Not all channels broadcast the programme data. If
the name and time of the programme are not available,
then information banner will be displayed with blanks.
If the selected channel is locked, you must enter the
correct four-digit numeric code to view the channel
(default code is 0000). “Enter PIN” will be displayed on
the screen in such a case.
Source Selection
Press the SOURCE button on the remote control for
switching between the sources.
(g.1)
(g.2)
(g.3)
(g.4)
(g.5)
14

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105 15
Connections
Back connections explained
1. SCART socket
Inputs or outputs for external devices. Connect the
SCART cable between the SCART socket on the
TV and the SCART socket on the external device
(decoder, VCR or DVD player) (see page 00).
NOTE: If an external device is connected via the
SCART socket, the TV will automatically switch to AV
mode. When receiving DTV channels (Mpeg4 H.264)
or while in Media Browser mode, output will not be
available via the scart socket.
2. HDMI Inputs
Connects a device that has an HDMI socket.
The TV can display High Denition pictures from
devices such as a High Denition Satellite Receiver
or DVD Player. These devices must be connected
via the HDMI sockets or Component Socket. No
sound connection is needed for an HDMI to HDMI
connection (see page 00).
3. PC Input (VGA)
Connects a personal computer to the TV. Connect
the PC cable between the PC INPUT on the TV
and the PC output on the PC. You can use the
PC input to allow YPbPr signal connection with a
device that has component output. Connect the
YPbPr to PC cable (not supplied) between the
PC INPUT on the TV and the component video
outputs of the device.
4. RF Input (ANT.)
Connects to aerial (antenna) or cable TV. If you use
a decoder or a media recorder, you should connect
the aerial cable through the device to the TV with
an appropriate aerial cable (see page 00).
NOTE: When using the wall mounting kit (optional),
we recommend that you plug all your cables into the
back of the TV before mounting on the wall.
5. S/PDIF Coaxial Out
Outputs digital audio signals of the currently
watched source.
Use an SPDIF coaxial cable to trasfer audio
signals to a device that has S/PDIF input.
4
2
1
3
5

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105
16
Connections
Left side connections explained
6. CI Slot
Used to insert a CI card. A CI card allows you
to view all the channels that you subscribe to.
For more information, see “Conditional Access”
section.
7. USB Input
To connect devices to the TV, providing fast data
exchange. USB will only function in DTV mode.
Use an SPDIF coaxial cable to trasfer audio signals
to a device that has S/PDIF input.
8. Video input
Video Input is used for connecting video signals of
external devices.Connect the video cable between
the VIDEO IN socket on the TV and the VIDEO
OUT jack on your device.
9. Audio input
Audio Inputs are used for connecting audio signals of
external devices. Connect the audio cable between
the AUDIO INPUTS on the TV and the AUDIO
OUTPUT jacks on your device.
NOTE:If you connect a device to the TV via
the VIDEO INPUT, you should also connect your
device with an audio cable to the AUDIO INPUTS
of the TV to enable audio.
10. Headphone
Headphone jack is used for connecting an
external headphone to the system. Connect to
the HEADPHONE jack to listen to the TV from
headphones (optional).
YPbPr
6
7
YPbPr
YPbPr
8
9
YPbPr
10

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105 17
Connections
HDMI Connections
HDMI lets you enjoy high denition digital images
and high quality sound by connecting the TV to
external devices such as DVD players, set top
boxes or gaming equipment (g.1).
Power off both the TV and the device before
making any connections.
For more information, refer to your device’s own
instruction book.
After making the connection, switch to HDMI 1 or
HDMI2 as a source, depending on which HDMI
connector the external equipment is connected.
See, Input Selection section for more information
on changing sources.
NOTE: HDMI cable is not supplied.
SCART Connections
Most devices support SCART connection. You can
connect a; DVD recorder, VCR or decoder to the TV using
the SCART socket (g.2).
Power off both the TV and the device before making any
connections.
For more information, refer to your device’s own instruction
book.
NOTE:The Scart cable is not supplied.
NOTE:If your external device has a S-Video output, it is
possible to connect your external device with a SCART-S-
video adapter (not included) to the scart input of the TV. First
plug the SCART S-Video adapter to the SCART connector
on your TV set. Then, connect a S-video cable to the SCART
socket (via the Scart S-Video adapter) to the S-video output
of your external device.
VGA Connections
You can connect a computer (PC) to the TV to
display your computer’s screen image on the TV.
Power up both computer and TV before making
any connections.
Use a 15-pin D-sub display cable to connect a PC
to the TV. Use an audio cable between audio inputs
on the left side of the TV and audio output on your
PC to enable sound connection (g.3). You will
need to use the supplied SIDE AV CONNECTION
cable for connecting audio signals.
When the connection is made, switch “Source” to
“PC-VGA”. See “Input selection” section.
Set the resolution that suits your viewing
requirements. Resolution information can be
found in the “Appendix parts” .
NOTE: The cable is not supplied.
NOTE: You can use YPbPr to VGA cable (not
supplied) to enable YPbPr signal via VGA input.
WARNING: You cannot use VGA and YPbPr at the
same time.
HDMI 1
DMH I 2
SPDIF
Coax.OUT
External device
(not supplied)
HDMI Cable
g.1
HDMI 1
DMH I 2
SPDIF
Coax.OUT
Scart Cable
(not supplied)
External device
g.2
g.3
PC Input
(back)
Side AV Input
PC VGA Cable
(Not supplied)
PC Audio Cable
(Not supplied)
Or

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105
18
Side AV Connections
You can connect a range of optional equipment to
your LCD TV.
1. For connecting a camcorder, connect to the
VIDEO IN socket and the AUDIO SOCKETS. Do
not connect the camcoder to VIDEO IN socket
at the same time since it can cause noise in the
picture. For selecting the related source, see the
section “Input selection” in the following parts
(g.1).
2. To listen the TV sound from headphones,
connect to the HEADPHONE jack of theTV.
Using a Conditional Access Module
IMPORTANT: Insert or remove the CI module only
when the TV is SWITCHED OFF.
In order to watch certain digital channels, a conditional
access module (CAM) can be necessary. This module
must be inserted in the CI slot of your TV.
1. Obtain the Conditional Access Module (CAM) and
the viewing card by subscribing to a pay channel
company, then insert those to the TV using the following
procedure.
2. Insert the CAM and then the viewing card to the slot
that is located in the terminal cover at the rear side of
the TV.
3. The CAM should be correctly inserted, it is impossible
to insert fully if reversed. The CAM or the TV terminal
may be damaged if the CAM is forcefully inserted.
4. Connect the TV to the mains supply, switch on and
then wait for few moments until the card is activated.
5. When no module is inserted, “No Common Interface
module detected” message appears on the screen.
You can refer to the module instruction manual for
details of the settings.
Connections
g.1
CAM
module
g.2
Camera
AVCable
(notsupplied)
Headphone

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105 19
USB Disk Connection
Plug your USB device to the USB input of the TV.
NOTE:
Plug or unplug your USB disk while the TV is switched
off.
If you are going to connect a USB hard disk drive to the
TV set, USB connection cable used between the disk
drive and the TV should have a USB logo and should
be as short as possible.
While formatting a USB hard disk that has 1TB (Tera
Byte) or more le capacity, you can experience problems
with the formatting process. In such a case, you should
format the disk with your personal computer and the
formatted disk type should be FAT32.
CAUTION:
Quickly plugging and unplugging USB devices, is a
very hazardous operation. Especially, do not repeatedly
quickly plug and unplug the drive. This may cause
physical damage to the USB player and especially the
USB device itself. Do not pull out USB module while
playing or recording a le.
Connections
2.5” and 3.5” inch (hdd with external power supply)
external hard disk drives are supported.
IMPORTANT
You should back up your files before making any
connections to the TV set in order to avoid any possible
data loss. Note that manufacturer will not be responsible
for any le damage or dataloss.
It is possible that certain types of USB devices (e.g.
MP3 Players) or USB hard disk drives/memory sticks
may not be compatible with this TV.
The TV supports FAT32 and NTFS disk formatting.
USB Connections

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105
Basic Features
How to navigate menus - Selecting source
Once you have connected external devices to the TV,
you can select and change the input source required.
To change Input Selection, use one of the following
options:
Option a: Press the SOURCE button on the remote
control to directly select required source.
Option b: Select “SOURCES” from the “Settings”
menu using the “ ” or “ ” button.
Use the “” or “ ”button to highlight the required
input and press the “ ” button to select.
Electronic programme guide (EPG)
(optional)
Some, but not all channels send information about the
current and next programmes. Press the EPG button
to view the EPG menu.
It is able to get Information on all programmes for
the next 7 days by means of the 7-DAY-EPG. All
programmes on each channel will be displayed.
Info bar commands:
Red button (Prev Day): Displays the programmes of
previous day.
Green button (Next day): Displays the programmes
of the next day.
Yellow button (Zoom): Expands programme
information.
Blue button (Filter): Views ltering options.
INFO (Details): Displays the programmes in detail.
SUBTTL: Press SUBTITLE button to view Select
Genre menu. Using this feature, you can search the
programme guide database in accordance with the
genre. Info available in the programme guide will be
searched and results matching your criteria will be listed.
Numeric buttons (Jump): Jumps to the preferred
channel directly via numeric buttons.
OK (Options): Displays programme options including
“Select Channel” option.
Text (Search): Displays “Guide Search” menu.
(Now) : Shows the current programme.
20