Bush IDLCD3211HDV User manual

INSTRUCTION MANUAL
The Gold Technical Support Line: 1902 215 259
Personal Product Support
(Charges will apply at $2.95 per minute)
IDLCD3211HDV

Thank you for buying this Bush product, which is designed to give you many years of
trouble-free service.
You may already be familiar with using a similar unit, but please take time to read
these instructions. They are designed to familiarise you with the unit s many features
and to ensure you get the very best from your purchase.
Your safety and the safety of others is important. Therefore, please ensure you read
the Safety Instructions before you operate this unit.
In the unlikely event that your product fails to work normally, please call the below
Bush warranty number to discuss the problem with one of our qualified service
engineers.
Safety is important
Warranty
Australia
Bush Warranty: 1800 509 394
New Zealand
Bush Warranty: 0800 450 259
-1-
INTRODUCTION

CONTENTS
-2-
1. INTRODUCTION.........................................................................1
3. INSTALLATION..........................................................................
2. SAFETY INSTRUCTIONS............................................................3
FRONT PANEL...............................................................................
5
6
REAR PANEL.................................................................................
ANTENNA CONNECTION...............................................................
7
CONNECTING TO PC.....................................................................
8
PC PRESET...................................................................................
9
CONNECTING TO AV EQUIPMENTS...............................................
10
BATTERY INSTALLATION...............................................................
3
ACCESSORIES............................................................................. 4
4
5
4. REMOTE CONTROL................................................................ ...10
KEYS FUNCTION...........................................................................11
5. OPERATION........................................................................... ...12
BASIC OPERATION........................................................................12
EPG.............................................................................................. 14
TELETEXT..................................................................................... 13
MENU OPERATION....................................................................15-20
6. DVD OPERATION.................................................................. 21-25
6. TROUBLESHOOTINGS......................................................... 26-27
7. TECHNICAL SPECIFICATION..................................................... 28
8. WARRANTY................................................................................29
KEY BOARD ................................................................................

1. Do not use this apparatus near water.
2. Clean only with dry cloth.
3. Do not block any ventilation openings. Install in accordance with the manufacturers
instructions.
4. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
5. Protect the power cord from being walked on or pinched particularly at plugs
convenience receptacles, and the point where they exit from the apparatus.
6. Only use attachments/accessories specified by the manufacturer.
7. Unplug this apparatus during lightning storms or when unused for long periods of
time.
8. Refer all servicing to a qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
9. The apparatus should not be exposed to dripping or splashing and no objects filled
with liquids, such as vases, should be placed on the apparatus.
10. If the television is to be built into a compartment or similar enclosed, the minimum
distances must be maintained. Heat build-up can reduce the service life of your
television, and can also be dangerous.
Never tamper with any components inside the TV, or any other adjustment controls not
mentioned in this manual.
All LCD-TVs are high voltage instruments. When you clean up dust or water drops on
the LCD PANEL or CABINET, the power cord should be pulled out from the receptacle,
then wipe the TV with a dry soft cloth.
During thunder and lighting, unplug the power cord and antenna cord to prevent
damage to your TV.
All repairs to this TV should only be performed by qualified TV service personnel.
ADDITIONAL SAFETY NOTES
SAFETY INSTRUCTIONS
-3-
to a DC supply or any other power supply.
This TV can be connected to AC 100-240 Volts, 50/60HZ power supply. Never connect

INSTALLATION
3
4
FRONT PANEL
Infrared Remote Control............1
User s Manual ........................ 1
Battery(AAA)........................... 2
ACCESSORIES
1:
Remote control sensor.
2:
Indicator LED: GREEN POWER ON.
RED STANDBY.
3: Key board(see next page).
4:
-4-
1
2
30 30
Press
unit OFF.
button
Power:Press the standby
on the rear panel, to turn the unit on.
button
the standby ,again to
turn the

INSTALLATION
MENU
CH+
CH-
VOL+
VOL-
REAR PANEL
NOTE:
share one audio channel.
12
13 14
12 3 4567
8
9
10
11
15 16
1.
ANTENNA
AUDIO OUTPUT
OUTPUT
VIDEO OUTPUT
SPDIF
11.
VGA INPUT
12.
13.
14.
AC POWER INPUT
2.
3.
4.
5.
VGA-AUDIO INPUT
6.
7.
8.
9.
10.
YPbP 1
rINPUT
YPbP 2r INPUT
INPUTYPbPr1 AUDIO
YPbPr2 AUDIO INPUT
AV1 INPUT
AV2 INPUT
AV3 INPUT
15.
16.
3.
2.
HDMI1
YPbPr11.AV1 and
AV2 and YPbPr2 share one audio channel.
-5-
HDMI 2 INPUT
HDMI 1 INPUT
HDMI 1/HDMI 2
INPUT
1
2
3
4
5standby
1
2
MENU
3
CH+/CH-
In TV mode
to change the channel up and down.
In MENU mode, to select the menu items .
4
the items.
VOL+/VOL-
5.
INPUT
Press to display the Input Source Menu.
Press to display the Main Menu.
to adjust the sound level.
In Menu mode,
to select desired menu
ports DVI signal, the VGA Audio channel willget aWhen the
port
/HDMI 2
change to receive the audio from the
the CH+/CH- buttons
press VOL+/VOL- buttons
Press VOL+/VOL-
Standby button turns the TV on & off.
KEY BOARD

-6-
ANTENNA CONNECTION
INSTALLATION
Note:
Aerial connections IEC female:( ).
Input impendance unbalanced:75 .

-7-
STEPS:
CONNECTING TO PC
Be sure both the TV and computer are set to Power off.
1. .Connect VGA and audio cable
2. .Connect the power cord
3. , .Power on the TV switch the input source to VGA mode
4. .Power on the PC
This sequence is very important.
INSTALLATION
8
PC Audio
Power cord
VGA cable

1
2
3
4
5
6
7
640*480
800*600
60
60
60
RESOLUTION V.Freq.(Hz) H.Freq.(KHz)
INSTALLATION
PC PRESET
-8-
31.5
37.9
48.4
1280*1024 60 64.0
1600*1200 60 75
1680*1050 60 64.7
1920*1200 60 74
PRESET MODE(recommended resolution is 1366*768@60Hz)
1024*768

INSTALLATION
CONNECTING TO AV EQUIPMENTS
connection to
input.
video game or stereo system as well as a number of other electronic items.
YPbPr can support these video fomats:480i,576i,480p,576p,720p,1080i,1080p.
With VIDEO Terminal
TO VIDEO
Y
WR
HDMI
To audio
With VIDEO
terminal
VIDEO EQUIPMENT
R
W
Y
To video
W R
W R
Y
Y
Y
From Coaxial SPDIF
output
VIDEO RECORDER
Y
with SPDIF Input
terminal
WR
W R W R
GBR
Pr
Y
Pb
R
G
B
GBR
Pr
Y
Pb
R
G
B
GBRGBR
This TV provides three groups of AV,
-9-
two groups of YPbPr for convenient
WR
two
VCR, DVD or other video equipment and for HD signalgroups of HDMI ports
You can use the input terminals on the TV set rear as follows.
The TV can be connected to the following appliances: VCR, multi disc player, DVD, camcorder,
YY
Output
To audioOutput
Input
Input
WR
Y
VIDEO EQUIPMENT with AV
WR
Y
VIDEO EQUIPMENT with AV
VIDEO EQUIPMENT with YPbPr VIDEO EQUIPMENT with YPbPr

Remark:
REMOTE CONTROL
BATTERY INSTALLATION
1. Remove the battery cover.
2. Inserting the 2 AAA 1.5V batteries making sure the polarity (+ or -) of the batteries
matches the polarity marks inside the unit.
3. Mount the battery cover.
Replace with new batteries when the TV set begins to show the following symptoms:
not function with Remote
Control Unit.
1) Alkaline Battery Recommended.
2) Remove batteries when they are exhausted or if the remote control is not to be used for
an extended period of time.
-10-
Operation is unsteady or erratic, or sometimes the TV set does

REMOTE CONTROLREMOTE CONTROL
-11-
In DTV mode).
KEYS FUNCTION
1
【】
2
【MUTE 】
3
【INFO】
:
:
:
Number buttons
4
password
:
5 select signal source.
【INPUT】
:
AUDIO【】
6
:
9
10
【MENU】
11
【EXIT】
【P．】
【S.MODE 】select
7
8
MODE
【】/【】【】
【 】
/
/
:
:
:
:
12
13 【VOL+/-】
14 【CH+/-】
or down.
ENTER
【 】
channel up or down.
:
:
:
15
LIST
MENU :
:
28
【ZOOM】:
18
EPG
RECALL
:
:
19
20
21
22
:
:
:
:
23
25
27
16
29
SLEEP
TITLE:
splay the title content. ( DVD )
:
【0-9】These buttonsare used to
select a channel number or to enter your code to
unlock your
This button can be used to switch
between Audio options & Audio languages in DTV mode.
mode.
the Picture
:
Use the Arrow buttons to navigate
the m enu.
your desired options.
Press the Volume button to adjust the volumelevel up
Press the Channel button to adjust the
Press the ZOOM button to select
previous program.
Press the EPG ( Electronic Program Guide ) button to
: Press the Teletext button to view the Teletext menu.
:Press the Index button to view the index page.
Press the P.Mode button to select
Press the S.Mode button to
the Sound mode.
Press the Menu button to turn on the menu.
Press the Exit button to exit the menu.
Press the Enter button to select and confirm
Press the List button to view the channel list.
different screen
Press the Recall button to return to the
Press the Menu button to enter the DVD menu.(DVD)
SETUP :
【】
STILL :
Press the Sleep button to set sleep timer on or off.
Press the Title button to di
3
14
13
12
9
8
7
4
1
11
11
11
SD/USB
SLEEP
FAV
22
21
19
20
LIST
MENU
ENTER
6
11
2
INFO
5
10
16
23
15
GOTO
17 GOTO
disc, ti ( DVD )
mode of the
:Press the Goto button to change the playing time display
24
FAV
Mix mode.
Press the Setup button to display the DVD menu.
tle, track etc.
Press the Green button to fast forward play on the DVD.
Press the Red button to fast reverse play on the DVD.
Press the Yellow button to skip reverse play on the DVD.
Press the Blue button to skip forward play on the DVD.
26
$
:Press the Eject button to open & close disc tray.
:Press the Reveal button to reveal the hidden
n.
teletext information.
30 : Press the Play / Pause button to play or pause the DVD.
31
32 REPEAT: Press the Repeat button to repeat the selected title/chapter.(DVD)
33
34
35
36
sizes and to change the size of the Teletext .
: Press the Subtitle button to enter into subtitle mode or subpage.
37
SD/USB: Press the SD/USB button to select SD/USB mode. (DVD)
: Press this buttonto enter to the
turn on
or off the guide in DTV mode.
38
39
24 \\ ,25,26 27,28,29
30,31 32, 33
34,35
36
37
38,39
17,18
Turns the Power on or off.
Turns the Program information menu on or off.
Turns the Sound on or off.
Press the Input button to
10
15
: Press the Stop button to stop play on the DVD.
Press the Still button to hold the picture.
: Press the Hold button to hold the Teletext page.
: Press the FAV button to select the favourite channel.
RADIO: Press Radio button to turn Radio on or off.

OPERATION
-12-
BASIC OPERATION
Installation Guide
Language
Auto
Tuning
English
EXIT MENU OK
CHANNEL SEARCH
and press the ENTER button to confirm.If you are using the unit for the first time, an
Press the INPUT
" button
on remote
If unused for a long time,
the power cord from the wall outlet.
Note: The TV set can turn off automatically after 5 minutes while there is no signal
input.
2. Turn on the main power switch.
to
''"
button on the remote control to select the TV or DTV input mode
Installation Guide menu will be displayed to guide you through the Channel Scan.
Use the remote control to finish Channel Scan.
4. To turn off the TV, press ''
please disconnect
5. The power consumption is less than 1W in Standby mode.
TURN ON /OFF THE UNIT
1.Connect the TV unit to the power source using the power cord.
turn on the TV. The indicator will now
be green. Press the button again to turn the TV back to Standby.
3. When the power indicator is red, the TV is in Standby mode. Press the "
VIEW CHANNEL INFORAMTION
MUTE
CHANGE INPUT SOURCE
Press the
Press the button repeatedly to cycle through the available sound modes.
Press the buttons to select the input source and
Press the CH- or CH+ button to select the previous or next channels or press the 0-9
list and press the buttons to select the desired TV programmes.
Press the button to cut off the sound output, press this button again to resume
sound output.
MUTE
button then press the
INPUT
S.MODE
button repeatedly to cycle through the available picture modes.
Press the INFO button to display the preset channel information.
P.MODE
the volume.
Press the VOL - or VOL + button to adjust the volume level. Press the VOL - button
CHANGING THE CHANNEL
CHANGING THE VOLUME
repeatedly to decrease the volume. Press the VOL + button repeatedly to increase
CHANGING THE PICTURE MODE
press the ENTER button to confirm.
CHANGING THE SOUND MODE
control or on the right of the panel
'' button on the left of the panel.
buttons to enter a channel number directly. Press the LIST button to view the channels

OPERATION
Teletext is an information system broadcast by certain channels which can be
consulted like a newspaper. It also offers access to subtitles for viewers with
TELETEXT
-13-
hearing problems or who are not familiar with the transmission language.
【】/【】
Page selection
Hold
Index
Enlarging Text
1.Select a TV station with a teletext signal.
correct page number.
2.The following page.
Some teletext may contain several sub-pages which are automatically paged in a
certain cycle by the TV station.
Subpage
number during input, you must complete the three digit number and then re-enter the
e.g.0003 for the third subpage.
When a page is displayed, you can double the size of the text to make it easier to read.
Display Teletext
3.Press the button once more to return to the normal display.
Reveal mode
from the display.
You can display concealed teletext information (e.g.Answer to puzzles or riddles
You can press the
button to hold a page and press it again to release the page.
Press the
button to enter the main index page directly.
1.Press the
button to enlarge the top half of the page.
2.Press the
button again to enlarge the bottom half of the page.
button.
2.Press the
3.Press the
button to return to the normal TV mode.
1.You can select a certain subpage by pressing the SUBTITLE button directly
and selecting the page
Enter the subpage number,
correspond with the appropriate option.
1.Enter the page number (three digit) using the NUMBER buttons. If you press a wrong
etc.) by pressing the button again to remove the
information
Press the
button, again to exit the subpage mode.
number with the NUMBER buttons.
buttons and keysCH+/CH- can be used to select the
Press these buttons when promoted by the on screen Menu. Each colour will
Colour buttons(Red, Green, Yellow, Cyan)
Mix mode
Press the buttont to enter the Mix mode directly.
2.Press the
button to enter the teletext mode.
3.Press the
button again to exit.

OPERATION
-14-
EPG
The EPG (Electronic Programme Guide) menu is used to look at what is
being broadcast on a DTV or Radio channel at a later point in time.
he detailed programme
information of the channel currently being viewed will be displayed.
Press the EPG button to access the EPG menu, t
To see what is going to be broadcast after the current programme, press the
the programmes televised at the current time.
To view a different channel, press the or
To exit the EPG menu and watch the selected channel, press the or button.
EPG EXIT
() only available in DTV mode
EXIT OK EXIT MENU
INFO OK
PROGRAMME GUIDE
05 Mar 2008 01 07:05 Mar 2008 01 07:
DTV 23 ABC3
01 05 02 20 Movie Dangerous Mission:-: :
DTV 23 ABC3
01 05 02 20 Movie Dangerous Mission:-: :
DTV
2ABC1
20 ABC HDTV
21 ABC1
22 ABC2
23 ABC3
B..B..
B..B..
B..B..
Movie Dangerous Mission:Movie Dangerous Mission:
Movie Dangerous Mission:Movie Dangerous Mission:
Movie Dangerous Mission:Movie Dangerous Mission:
05 Mar
01 00:01 00:02 00:02 00:
Anim..Anim..
Anim..Anim..
Anim..Anim..
Movie Crossfire:Movie Crossfire:
Movie Crossfire:Movie Crossfire:
Movie Crossfire:Movie Crossfire:
ABC2 resumes at 7 00am.ABC2 resumes at 7 00am.
.. Movie Dangerous Mission:Movie Dangerous Mission:Anim..Anim.. No Information
Schedule
DATE
Reminder
buttonto return to
buttons.
To book a press the blue button to enter the Reminder menu.
Press the GREEN button to enter the schedule list.
Press the INFO button to show the information of the programme.
programme to watch later,
button
in EPG Mode to view future programmes.
Press the

OPERATION
Using the Function
Menu overview
to
to
ǏMENU ǐ
button
5.If the channel is locked or Lock System is On,
Channel Menu (In TV,DTV mode)
, it means t hat the item is not available or cannot be adjusted.
Ǐǐ/Ǐǐ
Ǐǐ
Ǐǐ
/
Ǐǐ
Ǐǐ
/
Ǐǐ
Ǐǐ
/
Ǐǐ/Ǐǐ
cycle
you want.
Press the
ǏMENU ǐPress the button or buttons
Press the buttons select the subme nu
1.Press the MENU button to select the Channel Menu.
Press
2.Press the buttons to highlight the item to be adjusted.
3.Press the buttons to adjust the submenu or subitem.
Display
In the course of auto searching, you can press "EXIT"
to
"
Auto Tuning
Note If it is the first time installation it will start
with Installation Guide Menu
:,
.
channels
automatically .
will
Installation Guide
Language
Auto
Tuning
English
EXIT MENU OK
T u n e
Please select country first
Then select Start to update info
,
.
Please select country first
Then select Start to update info
,
.
Country selection AustraliaCountry selection Australia
Start Cancel
ENTER
-15-
to display the Ma in Menu.
Lock.Sound,Timer, Option and
When an item in the MENU is grey
buttons to cycle through the Main Menu
.
4.When you are satisfied with your adjustment, press the EXIT button to exit the Main Menu.
Press the
"
"
buttons and " button
to start Auto Search.
The TV search and share all avilable
stop the searching process. Press Menu to Skip
ATV to DTV.
through the main menu:
Channel,Picture,
you should enter the password before channel
searching.

OPERATION

Return
" button to search."
DTV Manual Tuning only available in DTV mode
"
Press EXIT to exit." " button
EXIT EXIT EXIT
EXIT
OK
DTV Manual Tuning
UHF CH 67
Bad Normal Good
EXIT OK MENU
ATV Manual Tuning
Storage To 1
System DK
Current CH 1
Search
Fine Tune
Skip NO
Frequency 535 25
MHz
EXIT SAVE
DTV
DTV
DTV
Programme Edit
2 ABC1
20 ABC HDTV
21 ABC1
DTV
22 ABC2
DTV
Radio
Radio
TV
TV
23 ABC3
200 ABC DIG
Radio
200 ABC DIG Jazz
1 BBC1
2 C
- 01
TV
3 S - 42
DELETE RENAME
MOVE
SKIP
FAV
Please select channel then
press ENTER to search
SKIP
If you find one channel is a little weak,
you can adjust the frequency of the channel.
ATV Manual Tuning ()only available in TV mode
"
"
''EXIT'' to exit.button
Programme Edit
"
.
:.
.
channel
Note Only the TV channel can be renamed
"
"change the letter
SKIP
Note The list of programs include TV DTV and Radio
The programs can be moved only among the same kind
:,
.
a
ENTER
-16-
You can also set the program list one by one by
through the "Manual Search" function.
Press the "buttons to select a channel.
Press the
When a channel is found, the searching process will stop.
The channel will be stored with current channel number.
To continue searching press the ""buttons.
Press the
Press the
the channel.
Press the RED button to save
the channel.
Press the
.
Press the RED button to delete a channel.
Press the
Press the
"
"
and press the buttons to
Press the
YELLOW button to move the channel.
Press the
button to skip a channel.
buttons
" buttons to select the channel.
" buttons to adjust
GREEN button to rename
to select the letters required
This may improve the quality of picture and sound.
" buttons to select a channel
Press "FAV" button to select a favourite channel.
Press the

OPERATION

Picture Menu
PICTURE
Picture Mode Standard
Contrast 75
Brightness
45
Color 50
Sharpness
50
Tint 0
EXIT MENU
OK
PICTURE
Screen
EXIT MENU
OK
PICTURE
Adjust
Horizontal Pos. 50
Vertical Pos.
Size
Phase
50
0
60
EXIT MENU
OK
Auto Adjust
Picture Mode
Standard Mild and User modes.
Contrast
picture.
Brightness
to adjust the brightness
of the picture.
Color
saturation.
Sharpness
to adjust the sharpness
level of the picture.
Tint
to adjust the tint
of the picture NTSC ONLY.( )
Color Temperature
warm and cool
,
to select among
medium ,.
Aspect Ratio
Noise Reduction
to turn on off the function of noise
/.
Screen (-)only available in PC RGB mode
▼
to exit.
reduction
to select the ratio of the screen.
-17-
Dynamic,
Press the
Press the ""buttons to select among the
""buttons to adjust the contrast
of the
Press the ""buttons
Press the
Press the ""buttons
Press the ""buttons
Press the ""buttons
Press the ""buttons
Press the ""buttons
Press the
Press the ""buttons
to select an items.
""buttons
to adjust
Press the
""buttons
Press the
""button to enter the submenu.
the item.
""buttons to adjust the colour
Ǐǐ
Ǐǐ
/
Ǐǐ
Ǐǐ
/
Ǐǐ/Ǐǐ
Press
2.Press the buttons to highlight the item to be adjusted.
3.Press the buttons to adjust the submenu or subitem.
buttons to cycle through the Main Menu
.
4.When you are satisfied with your adjustment, press the EXIT button to exit the Main Menu.
1.Press the MENU button to select the Picture Menu.

OPERATION
-18-
Sound Menu
EXIT MENU OK
SOUND
Sound Mode
Treble
Balance
Auto Volume
Surround Sound
Standard
Off
Off
Sound Mode
to select among
Standard
Treble
to adjust the level of the
higher
Bass
to adjust the level of the
lower
Balance
Auto Volume
Surround Sound
Movie,
speakers.
Bass
-
,,Music
-
to turn on/off the function of auto volume.
to turn on/.off the function of surround sound
to adjust the audio output between left and right
Press the ""buttons
Sports and Use modesr .
Press the ""buttons
pitch sounds.
Press the ""buttons
pitch sounds.
Press the ""buttons
Press the ""buttons
Press the ""buttons
Ǐǐ
Ǐǐ
/
Ǐǐ
Ǐǐ
/
Ǐǐ/Ǐǐ
Press
2.Press the buttons to highlight the item to be adjusted.
3.Press the buttons to adjust the submenu or subitem.
buttons to cycle through the Main Menu
.
4.When you are satisfied with your adjustment, press the EXIT button to exit the Main Menu.
1.Press the MENU button to select the Sound Menu.
Time Menu
Ǐǐ
Ǐǐ
/
Ǐǐ
Ǐǐ
/
Ǐǐ/Ǐǐ
Press
2.Press the buttons to highlight the item to be adjusted.
3.Press the buttons to adjust the submenu or subitem.
.
4.When you are satisfied with your adjustment, press the EXIT button to exit the Main Menu.
1.Press the MENU button to select the Time Menu.
buttons to cycle through the Main Menu
EXIT MENU OK
TIME
Clock
Time Zone New
South
Wales GMT
+
Sleep Timer Off
Clock
or set the system time.
Sleep Timer
to set the sleep timer.
Time Zone
to set the time zone.
Note cannot be modified once obtain
the local time from DTV channel
:
.
Clock
You can display the system time from DTV signal
Press the ""buttons
Press the ""buttons

OPERATION
-19-
Option Menu
Ǐǐ
Ǐǐ
/
Ǐǐ
Ǐǐ
/
Ǐǐ/Ǐǐ
Press
2.Press the buttons to highlight the item to be adjusted.
3.Press the buttons to adjust the submenu or subitem.
.
4.When you are satisfied with your adjustment, press the EXIT button to exit the Main Menu.
buttons to cycle through the Main Menu
1.Press the MENU button to select the Option Menu.
Blue Screen
to turn on off the
function of
/
.
blue screen
Summer Time
EXIT MENU OK
OPTION
Language
Country
English
Australia
Restore Factory Default
EXIT MENU OK
OPTION
Language
Country
English
Australia
Blue Screen
Restore Factory Default
Off
Summer Time On
Restore Factory Default
Note If the OSD display is abnormal after restoration
:.
Press the ""buttons
Press the ""buttons
to turn summer time
function on or off. ()
DTV ONLY
Please turn the TV off for 10 seconds
and then turn it on again & if should return to normal.
When there is no signal in analog TV mode, the
Press the ""buttons
to
for the Restore factory Default option.
select yes/no
Press the
''EXIT'' button to exit this option.
blue screen will appear.
Enter your set password or the default password (0000).
Lock Menu
The default password is “0000”.
the Lock Menu.
Ǐǐ
Ǐǐ
/
Ǐǐ
Ǐǐ
/
Ǐǐ/Ǐǐ
Press
buttons to highlight the item to be adjusted.
buttons to adjust the submenu or subitem.
.
buttons to cycle through the Main Menu
1.Press the MENU button to select the Lock Menu.
2.Press the Ǐǐbutton to enter password menu, then input the default password to
enter the Lock Menu.
3.Press the
4.Press the
5.When you are satisfied with your adjustment,
press the EXIT button to exit
EXIT MENU OK
OPTION
Language
Country
English
Australia
Restore Factory
Default
EXIT MENU OK
LOCK
Lock System
Set Password
Off
No Block
Block Program
Parental GuidanceParental Guidance
Max Volume 100