Bush VHS01A17Z User manual

Service Manual
Vacuum Cleaner
VHS01A17Z

Midea LOGO
Contents
1Specifications…………………………………………………………1-2
2 Electrical Diagram…………..…………………………….…………..3
3 Schematic Diagram……………………………..…………………….4
4 Repair of Main Parts…………………………………….……………5
4.1 Upper and Lower Body……………………………………………6
4.2 Cord Reel Assembly…………………………………………..……7
4.3 Motor……………………………………………………………………..8
4.4 Connection Hose, Hose…………………………………………..9
5 Trouble Shooting Chart……………………………………..…….10
6 Replacement Parts List…………………………………………….11
7 Packing Instruction……………………………………………….…12
(备注：黄色部分根据实际机型调整)

Follow caution information wherever you see this symbol.
1 Specifications
MODEL
VHS01A17Z
POWER SOURCE
21.6V DC
BATTERY VOLTAGE
21.6V
BATTERY CAPACITY
2000mA
MAX. VACUUM CAPACITY
8.0kPA
RUNNING TIME
19~20mins
RECHARGING TIME
3hrs
DUST CAPACITY
0.35L
WEIGHT(MAIN BODY)
2.4kg
DIMENSION(WxLxH)
170x1100x250
ATTACHMENTS
Furniture Brush, Crevice Tool
2 Electrical Diagrams

3 Schematic Diagrams
4 Repairs of Main Parts
4.1 Upper and Lower Body
Detach the parts
1. Discharge the power brush from the connection tube (Fig1), and removes the connecton
tube from the unit body(Fig2).
1
2

2. Detach the battery package from the unit body(Fig3), and rotate the motor upper cover
and lift it up from the body(Fig4).
3.
3. Rotate the dust cup and inner separator , discharge the dust cup and separator from
body(Fig5);
4. Remove the 3screws ,and take out the motor housing cover and motor assy. (Fig6)
5. Discharge the handle cover, and take the switch out(Fig7), Disassemble the battery pack holder
and handle frame from the unit body(Fig8)
Disasse
4
5
6
7
8

6. Discharge the main PCB assy , and dust cup body finally(Fig9).
Assembly
1. Assemble the main PCB to dust cup body(Fig 10), and fix handle frame and battery pack holder
to dust body(Fig 11).
2. Assemble the power switch and handle cover to unit body (Fig 12), Fix the motor assy to
body, connect the wires and screw the motor housing cover to body.
3. Assemble the dust cup ,cup separator ,HEPP , HEPA cover and batttery Pack to unit body(Fig
9
10
11
12
13

14). Connect the unit body with tube and power brush finally.
5 Trouble Shooting Chart
Trouble
Possible Causes
Countermeasure
The vacuum cleaner does
not work, or power brush
does not work
1.The plug is not plugged in
2.The power switch didn't open.
3.Internal wiring of loose
4.The motor burned out
5. Power brush broken
1.Re plug
2.Press the power switch
3.Re connect the internal
wiring
4.Repair or replacement of the
new machine
5. Check out if there is light
comes out from LED of power
brush
The suction become
smaller
1. No power of the battery pack
2. The channel blocked suction
head
3. Poor ventilation dust bag
4. Air inlet and
outlet filter blocked
5. Motor problems
1. Recharge the unit till battery
is full
2. Clean the suction
head channel
3.Clean up the dust bag
4.Cleaning filter
5. Repair replacement of
the motor
Full dust indicator of
adverse action
1. The dust suction channel block
2. The buoy stuck
3. Spring is broken
1.Clean up the dust absorption
channel
2. Repair full dust indicator
3. Repair full dust indicator
6 Replacement Parts List
No.
Part Name
Part Code
Specs.
QTY
1
地刷组件 Power Brush
2
插接管 Tube
14
14
15

3…
主控板 Main PCB
4
电机组件 Motor Assy
5
上尘杯组件 Dust cup
body
6
分离器组件 Cup
separator
7
HEPA 组件 HEPA
8
电池导轨 Battery
holder
9
手柄盖 Handle cover
10
开关组件 Power switch
11
电机上罩 Motor
housing cover
7 Packing Instructions