Bush ZB1511 User manual

ZB1511

WARNINGS
described in this user guide. Please ensure that this guide is fully
Always switch off and remove the charger from the socket before
cleaning the appliance or any maintenance task.
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
If the adapter is damaged stop using the appliance immediately.
brushes.
Use only the original charger supplied with the appliance.
Check that your supply voltage is the same as that stated on the
charger.
Plug the charger into suitable socket outlet and connect the charger
jack plug to the appliance.
Before first use, charge your appliance for at least 6 hours. The
charging LED indicator will illuminate red when charging and
will illuminate blue when fully charged.

It is normal for the charger to become warm to the touch when charging.
Do not unplug the charger by pulling on the power cord.
Unplug the charger in the event of prolonged absence (holidays,etc.).
over increased periods of storage.
The appliance must be disconnected from the supply mains when
1.
2.

IMPORTANT
removal and ensure the charger is unplugged.
Remove the charger jack plug from the appliance.
Note: Should you experience any difficulty in dismantling the
recycling of this appliance, please contact your local city office or
your household waste disposal service.
supplied by Bush.
Do not use your appliance out of doors or on any wet surface or
for wet pick up.
Do not pick up hard or sharp objects, matches, hot ashes,
up flammable liquids, cleaning fluids, aerosols or their vapours.
Do not run over the power cord when using your appliance or
use your appliance or charger if it appears faulty.
IMPORTANT&Note

1
4
2
5
6
8
1.
2.
3
7
9
10
11
15
12
16
14
13
1. Release bu on for motor protec on filter cover
9. Dust bin
4. Telescopic tube
14. Base flap lock for dust bin8. Wallmount
furniture dust brush

1. Telescopic tube
3. Crevice tool
4. Cleaning head
12 3 4
ZB1511 DC18V/150W
Model no Charge Time Noise Level Net Weight
5H 1.4Kg86 dBA

Installing your Lightweight Cordless Vacuum Cleaner
screws and screw plugs provided.
2. Insert the nozzle head into one side of tube
3. Insert another side of tube into handheld unit
4. To fully charge the appliance, connect the
charger jack plug to the appliance. It will take
around 6Hrs.
NOTE: To remove the nozzle press the nozzle
NOTE: Use only the charger supplied with your
cleaner to recharge.
It is normal for the charger to become warm to the
touch when charging.

IMPORTANT:
with specialized charger.
reduce, in order to get the best using effect, we advise you can use up power (normally

1.
2.
1. Push down the dust cup empty buon to release the bin flap and empty
the contains.
2. Close the dust cup flap up, you will hear a click when fully locked.
NOTE: It is recommended to empty the dust cup aer each use or when
dust is up to the max fill line.
Emptying the Dust Container
Cleaning the Dust Container and Filter
1. Press the accessory release buon and remove the tube.
2. Press the dust cup empty buon to open the bin flap and empty it.
3. Press the dust cup release buon and also pulling the dust cup away in
an downwards and outward direcon.
4. Turn the mesh filter to the anclockwise direcon to align the arrow
mark and then it can be pulled out from the cleaner.
5. Turn the cyclone separator to the anclockwise direcon, align the arrow
mark and then it can be pulled out from thecleaner.
6. Press the two exhaust filter release buons simultaneously and then
remove the exhaust filter.
7. Wash the exhaust filter in lukewarm water and leave to dry for 24 hours.
Reassemble once completely dry and refit to the product.
8. Wash the dust cup/mesh filter/cyclone separator in lukewarm water.
Ensure it is fully dry before returning to the main body.
9. Reassemble the handheld unit and then aach it to the docking staon.