BYRNE RIALTO User manual

INSTALLATION INSTRUCTIONS FOR RIALTO
320 Byrne Industrial Drive, Rockford, MI 49341 www.byrne.com 1 of 2
IS03021 © 2016 Byrne Electrical Specialists, Inc. All Rights Reserved P 800.999.3567 02/21/2017
Lay Rialto Starter, Intermediate and/or Power on oor or large at surface.
Align Male Connector with Female
Connector using alginment pins
Female
Connector Male
Connector
Release
Button
* Multiple Intermediates can be used
to customize length up to 25 Feet.
For Data, lay data cables
in open Data Channels.
STARTER
INTERMEDIATE *
POWERBASE
Data
Channels
Data Clips
To disconnect Rialto unit:
UNPLUG RIALTO STARTER FROM
ELECTRICAL OUTLET ON WALL.
Depress Release Button and slide units apart.

RAILTO STORAGE INSTRUCTIONS:
1) Unplug Rialto and all electrical devices connected to it.
2) Separate Rialto into modular pieces (Powerbase, Intermediate & Starter).
3) Slide each piece into carrying case, using a separate compartment for each.
Any alignment pins should be at the top where the case closes.
4) Use velcro to secure case cover.
5) Use handles of carrying case to transport Rialto.
320 Byrne Industrial Drive, Rockford, MI 49341 www.byrne.com 2 of 2
IS02616 © 2016 Byrne Electrical Specialists, Inc. All Rights Reserved P 800.999.3567 02/21/2017