C & K Systems LED Keypad User manual

PartNumber5-051-264-01 RevC
12
54
78
3
6
9
0
#
Panic
SYSTEMS, Inc.

2
Thank you for purchasing this C&K alarm system. Your system is one of the most powerful
and advanced alarm systems on the market today, designed to provide you with years of
reliable operation.
This manual explains how to operate your alarm system. Basic operating instructions are also
printed on the label inside your keypad(s) door.
If you have any questions or need help with
your alarm system, call:
___________________________________
___________________________________
(AlarmCompanyName)
If you have monitoring questions or in cases
of accidental alarms, call:
___________________________________
______________________________________
(MonitoringStationName)
When calling the monitoring company, know the following:
My Account Number is:____________________ My Password is: __________________

3
Table of contents
Getting acquainted ............................................. 4-5
What the lights mean ......................................... 6-7
What the sounds mean ...................................... 8
Arming the system ............................................. 9-16
Bypassing zones.......................................... 14-15
Arming types................................................ 16
Disarming the system......................................... 17
After an alarm..................................................... 18
Options............................................................... 19-24
Changing a PIN............................................ 20-21
Deleting a PIN.............................................. 21
Resetting smoke detectors .......................... 22
Door chime / Keypad tones.......................... 23-24
Testing your system ........................................... 25-27
Telephone trouble .............................................. 28
Smoke detector placement................................. 29
Emergency evacuation....................................... 30
Definitions........................................................... 31
Limitations of your alarm system........................ 32
Keypad operations ............................................. 33-35
Test Procedure Index......................................... 36
Zone description list ........................................... 38
FCC Notice......................................................... 39
Industry Canada................................................. 40

4
What your alarm system is...
Your alarm system is made up of a control panel and several detection devices like motion sensors,
magnetic contacts, and so on. Specific areas of detection are called zones. Zones can be programmed to
have different characteristics. Some zones may be 24-hour zones, that is, they remain armed even when
the alarm system is off. Zones used for fire detection, for example, are always 24-hour zones. In addition,
some zones can be programmed to allow bypassing. When you bypass a zone, you temporarily remove
it from the alarm system. Always remember, however, that bypassed zones are not protected.
How your alarm system works...
When a detection device is triggered, the status of its zone goes from normal to FAULTED. If armed,
the control panel responds by reporting an alarm condition on site --- flashing keypad lights, sounding
bells --- and if programmed, by transmitting an alarm signal over the telephone wires to a central
monitoring station. The monitoring station then dispatches the appropriate authorities.
Some of your system's operations require you to enter your personal identification number (PIN) on the
keypad. These include ARMING and DISARMING.
Along with its many other features, your system can be programmed to ARM INSTANTLY or to ARM
WITH TIME DELAY (i.e., after giving you time to leave the premises).

5
Eachalarm system in the2300familyisdesignedto meet the specificneedsofavariety of applications. The System
236 is designed for applications requiring protection of six zones.
Some of the available features of your alarm system are also optional, and will only be installed if appropriate for
your installation. In addition, some system features will require you to enter your personal identification number
(PIN).
As you read through this manual, watch for boxes like these:
If an optional feature has been installed in your system, its
OPTION INSTALLED box will be checked.
.
.If a feature of your system requires you to enter your personal
identification number, its PIN REQUIRED box will be checked.
OPTION
INSTALLED PIN REQUIRED

6
ON OFF FLASHING
ACpowerisbeing
supplied Batteryislow;callyour servicedepartment
ACpowerfailure-
systemisusingbattery
...
Systemisarmed-
protectionison Systemisnotarmed- protectionisoff Systemisarmedwith delayzonesconvertedto
instantzones
..
.
POWER
ARM
Normalstate;zoneisnot
faulted
.
ZONES Zoneisfaultedwhile
systemisdisarmed
.FLASHING SLOW -
Zoneisbypassed
Zoneisintrouble
.
.
FLASHING FAST -
Zoneisorwasinalarm
.

7
ON OFF FLASHING
Bellfusefailed
.FLASHING SLOW -
Watchdogreset
Zoneisintrouble(when
accompaniedbyslow
flashingzonelight)
Normalstate
..
.
SERVICE
POWER,
ARM,and
SERVICE
FLASHING SLOW -
FLASHING FAST -
Failedtocommunicate
.
.The POWER, ARM, and
SERVICE lights simultane-
ously flash(slowly)when
intheprogrammingmode.

8
SOUND MEANING
2beeps(confirmationtones) systemarmedordisarmed
.successfulcentralstationtestorbatterytest
.
pulsedtone(2secondson,2secondsoff) zoneprogrammedforpulsedbellorsirenisinalarm
.
continuoustone zoneprogrammedforsteadybellorsirenisinalarm
circuitmalfunction(troubleonsupervisedloopsonly)
.
.
.
5beeps(errortones) invalidfunction
unauthorizedcommandattempted
errorchangingPINnumber
wrongPINnumberentered
.
.
.
zoneprogrammedforchirpingbellorsirenisinalarm
.
chirping(1secondon,4secondsoff)
zonefaultedduringwalk-test
.
2secondbeep doorchime
.
continuousbeeping,speedingupforlasttenseconds exitdelaytime
.
.
continuoustone,beepingfastforlasttenseconds entrydelaytime

9
Make sure all the ZONE lights are off.
Faultedzonesmustbeclearedorbypassedbeforethesystemcanbearmed. Formore
information,refertothesectionsBypassingZonesandAfterAnAlarmOccurs.
TO ARM THE SYSTEM / AUTO HOME ARMING:
.
Ifprogrammed,theredZONElightswillautomaticallyturnoffafterfiveminutes(asa
securitymeasure). PressinganykeyonthekeypadwillturntheZONElightsbackon.
.
OPTION
INSTALLED
YourPINnumberisfourdigitslong.
Don'tpauseformorethan5secondswhileenteringthedigitsorthecontrolpanelwill
rejectyourPINnumber.
Enter your PIN and push the
#key.
.
.
PIN
REQUIRED
IfyoumakeamistakewhileenteringyourPINnumber,thekeypadwillbeepfivetimes.
Afterthefifthbeep,enteryourPINnumberagain.
.
Make sure the red ARM light comes on.
Thekeypadwillbeeptwicetoconfirmthatthesystemisarmed.
.

10
Exit through any TIME DELAY DOOR within seconds.
Theexitdelaytimecanbeprogrammedfrom10secondsto150seconds.
.
.Oncetheexitdelaytimehasexpired,thekeypadwillbeeptwicetoconfirmthatthe
systemisarmed.
IftheEXITPRE-ALARMoptionisinstalled,thekeypadwillbeepslowlyuntil10seconds
beforethedelaytimeexpires,thenrapidlyforthelast10seconds.
.
OPTION
INSTALLED
TherestoftheARMINGTHESYSTEMsectionexplainshowtobypasszonesbeforearmingthesystem,aswellas
certainarmingoptionsourinstallercaninstall. However,it'simportantforyoutorememberthatnomatterhowyour
system is programmed, you will always disarm it in the same way: enter your PIN, then push the # key.
OPTION
INSTALLED TheAUTOHOMEARMINGoptionenablesthesystemtoautomatically
bypassinteriorzonesifyouarmthesystembutdonotleavethepremises.
Theperimeterzoneswillbearmedandtheentrydelaywillremainintact.
With this option installed, arm the system (enter your PIN and push the # key).
.Ifyoudonotexitbeforetheexitdelaytimeexpires,thesystemwillautomaticallyarm
perimeterzonesandbypassinteriorzones.
.Ifyouexitthroughanexitdelaydoor,thesystemwillautomaticallyarminteriorand
perimeterzones.

11
INSTANT ARMING
InstantarmingconvertsalltimedelayedzonestoINSTANTzones.
Make sure all the ZONE lights are off.
PIN
REQUIRED
.
.
OPTION
INSTALLED ExitDelayDisable(seepage16).
.
HomeArmingorbypassinginteriorzoneswillallowyoutomoveaboutfreelyinsidethe
premiseswhilethesystemisarmed. Refertothenextthreesections:HOMEARMING,
INSTANT HOME ARMING, and BYPASSING ZONES.
.
CAUTION: Whenthesystemisinstantarmed,youwillnotbeabletoenterthroughany
perimeterdoororwalkthroughanyprotectedareawithoutsettingoffanalarm.
Enter your PIN (if required),
push the key, enter the digit "7",
then push the # key.
TheredARMlightwillflashwhilethesystemisinstantarmed.
Thekeypadwillbeeptwicetoconfirmthatthesystemisarmed. 7

12
Enter your PIN (if required),
push the key, enter the digit "4",
then push the # key.
Thekeypadwillbeeptwicetoconfirmthatthesystemisarmed.
Homearmingarmsperimeterzones,whilebypassinginteriorzones.
HOME ARMING
Make sure all the ZONE lights are off.
TheredARMlightwillbeonwhilethesystemisarmed.
PIN
REQUIRED
.
4
.
HomeArmingallowsyoutomoveaboutfreelyinsidethepremiseswhilethesystemis
armed.
.
Youcanenterthepremiseswithoutsettingoffanalarmthroughanytimedelayentry.
(Don'tforgettodisarmthesystemafterentering!)
.TheredZONElight(s)ofbypassedzoneswillflashslowly.
.
OPTION
INSTALLED ExitDelayDisable(seepage16).
.

13
INSTANT HOME ARMING
Instanthomearmingarmstheperimeterzonesandbypassesinteriorzones.
EntrytimedelaysareconvertedtoINSTANT.
Make sure all the ZONE lights are off.
Thekeypadwillbeeptwicetoconfirmthatthesystem
isarmed.
Enter your PIN (if required),
push the key, enter the digit "7",
the digit "4", then push the # key.
PIN
REQUIRED
.
.TheredARMlightwillflashwhiletheperimeterzonesareinstantarmed.
OPTION
INSTALLED
TheredZONElight(s)ofbypassedzoneswillflashslowly.
.
47
7 4
ExitDelayDisable(seepage16).
.
CAUTION: Whenthesystemisinstanthomearmed,youwillnotbeabletoenter
throughanyperimeterdoorwithoutsettingoffanalarm.
OR

14
BYPASSING ZONES
Thisprocedureallowsyoutobypassoneormorezoneswhileyoursystemis
DISARMED*.
NOTE:Systemprogrammingdetermineswhichzonescanbebypassed. Tolearnifa
zone can be bypassed, see the ZONE DESCRIPTION LIST on page 39.
Enter your PIN (if required).
PIN
REQUIRED
Push the key, enter the digit "2", enter
the zone to be bypassed, then push the
#key.
2ZONE #
TheZONElightforthebypassedzone(s)willflashslowly.
.
*NOTE:Zonescanbealsobebypassedbyremoteprogramming. Whenremote
programmingisused,thesystemcaneitherbearmedordisarmed.

15
NOTE: Disarming your alarm system REMOVESall bypasses.
.The procedures for adding a bypass and removing a bypass are identical. To
removeabypass:enteryourPIN,pushthe key,enterthedigit"2",enterthezone
fromwhichthebypassistoberemoved,thenpushthe#key.
Whenyouhavefinishedbypassingzones,armthesystembyenteringyourPINand
pushingthe#key.
.

16
Youralarmsystemhasbeenprogrammedforoneofthefollowingtwoarmingtypes:
GOOF-PROOF ARMING
Ifanyzoneotherthana24-hourzoneisfaulted(openwindow,malfunction-
ingsensor,etc.),yoursystemwillnotarm. Youwillnotbeabletoarmthe
systemuntilthefaultedzoneisclearedormanuallybypassed.
FORCE ARMING
Anyzone(exceptfor24-hourzones)thatisviolatedduringtheEXITDELAY
timewillautomaticallybebypasseduntilthesystemisdisarmed.
Warning: bypassed zones are not protected.
OPTION
INSTALLED
OPTION
INSTALLED
EXIT DELAY DISABLE
Ifthisoptionisinstalled,theexitdelaywillbeeliminatedwhenarmingyour
systemusingInstantArming(page11),HomeArming(page12),orInstant
HomeArming(page13).
OPTION
INSTALLED

17
TO DISARM THE SYSTEM:
Enter only through a TIME DELAY door.
IftheENTRYPRE-ALARMoptionisinstalled,thekeypadwillsoundconstantlyuntil10
secondsbeforethedelaytimeexpires(orthepanelisdisarmed),thenbeeprapidlyfor
thelast10seconds.
.
OPTION
INSTALLED
Enter your PIN within
seconds and push the # key.
PIN
REQUIRED
Make sure the red ARM light on the keypad goes off.
IftheARMlightdoesnotgooff,waitforthekeypadtobeepfivetimes,thenenteryour
PINagain.
.
Thekeypadwillbeeptwicetoconfirmthatthesystemhasbeendisarmed.
.Allbypassesareremoved.
.

18
AFTER AN ALARM OCCURS:
Enter your PIN and push the
#key.
Thiswillsilencethebell/sirenanddisarmthesystem.
.
TheredZONElightsonthekeypadwillflashfasttohelpyourememberwherethe
violationsoccurred.
.
PIN
REQUIRED
If this is a false alarm and no emergency response is needed, call
our central station IMMEDIATELY at to
cancelthealarm.
Writedownthenumberofthefaultedzonestohelpusserviceyou.
.
Clear the alarm memory and red ZONE lights
by pushing the key, entering the digit "1",
then pushing the # key.
1

19
24-HOUR MONITORING
Withthisoptioninstalled,youralarmsystemwilltransmitalarmsignalsto
ourcentralstation.
OPTION
INSTALLED
POLICE/PANIC KEY
Whenthisoptionisinstalled,holdingdownthe"7"and"9"
(PANIC)keysatthesametimewilltriggeranalarm. The
keypadwillbeeptwicetoconfirmthealarmcondition.
OPTION
INSTALLED 9
7
PANIC

20
User 1 can use his Master PIN to change the PINs of Users 1 - 6.
CHANGING A SYSTEM 236 USER PIN
Enter your master PIN, push
the key, enter the digit "0", then
push the # key. 0
MASTER PIN
REQUIRED
The POWER, SERVICE, and ARM lights will slowly flash.
.
Enter the User number (1 - 6), and push
the # key. USER #
Enter that User's new PIN and push
the # key.
ThenewPINmustbefourdigitslong.
.