Nakanishi E4000-PEX4 User manual

1
E4000 - PEX4
操作パネル延長コード / Control Panel Extension Cord
OM-K0598 001
取扱説明書/ OPERATION MANUAL
日本語：P1 - P3 / English：P5 - P7

5
English
Thank you for purchasing Contorol Panel Extension Cord E4000-PEX4. This Control Panel Extension Cord is
designed for can be away placed from the E4000 CONTROLLER main body. Read this and E4000 CONTROLLER
Operation Manuals carefully before use. Always keep this Operation Manual in a place where a user can referred to
for reference at any time.
1. SPECIFICATIONS
Product Name Control Panel Extension Cord
Model E4000 - PEX4
Applicable CONTROLLER E4000 CONTROLLER
Front Panel Dimensions 73mm ×73mm
Attachable Pitch 63mm ×63mm
Attachable Hole Dimensions φ3.4mm
Cord Length 4m
1 - 1 Specifications
Standard Accessories
・Mounting Screw (M3)・・4pcs. ・Operation Manual・・1set.
1 - 2 Standard Accessories
1 - 3 Outside View of the Control Panel
13.1
1.6
4.5
62
62
63
63
73
73
4-φ3.5
Fig. 1
Temperature Humidity Atmospheric Pressure
Operation Environment 0 - 40°CMAX.75%
(No condensation) 700 - 1,060hPa
Transportation and Storage
Environment -10 - + 50°C 10 - 85% 500 - 1,060hPa

6
①Rmove the Mounting Screw (4pcs.) of the Control Panel and remove the Control Panel to front.
Control Panel
Monting Screw
Fig. 2
②Remove the connector of the Control Panel (Fig. 3) and remove the Control Panel (Fig. 4).
Connector
Fig. 3 Fig. 4
2. INSTALATION OF THE CONTROL PANEL EXTENSION CORD
WARNING
・Turn OFF the Main Power Switch of the CONTROLLER before attaching the Control Panel
Extension Cord.
・When attaching the Control Panel, protect the Control Panel from oil and other contaminants.
・Take care when selecting routing of cord of Control Panel to insure that the cord is not routed
near potential sources of RF noise.
・Attach the Control Panel in manner to insure that the back of the circuit board of the Control
Panel does not contact any object or surface that could cause potential short circuit.

7
English
③Connect the connector of the Front Panel of the Contorl Panel Extension Cord to the connector of the
CONTROLLER (Fig. 5).
Attach the Front Panel of the Control Panel Extension Cord to CONTROLLER by Mounting Screw of the
Control Panel (Fig .6).
Front Panel Connector
Fig. 5
Front Panel
Fig. 6
④Connect the connector of the Control Panel Extension Cord to the connector of the Conrol Panel (Fig. 7).
Front Panel
Control Panel
Fig. 7
⑤Fasten the Control Panel for CONTROLLER to your orderd box or Control Panel Box (Option ) by using the
Mounting Screw (4pcs : Standard Accessories). Turn Control power ON and verify the CONTROLLER is
operating correctly.
Fig. 8
3. DISPOSAL OF THIS PRODUCTS
When disposal of E4000-PEX4 is necessary, follow the instructions from your local government agency for proper
disposal of electrical components .

2016.10.24 0005