C & K Systems System 236i User manual

Arming and Disarming Your CK 236i Alarm System
TO ARM THE SYSTEM:
Your PIN number is four digits long. Don't ause for more than 5 seconds
while entering the digits or the alarm system will not exce t your PIN NO.
Enter your PIN Code and ress the # key. Exam le: 1234 #
If you make a mistake while entering your PIN number, the key ad will
bee five times.
Make sure the red ARM light comes on. The code ad will bee twice to
confirm that the system is armed.
Vacate your remises within the required Exit time
The exit delay time can be rogrammed from 10 seconds to 150 seconds.
Once the exit delay time has ex ired, the key ad will bee twice to
confirm that the system is armed.
The key ad will bee slowly until 10 seconds before the delay time
ex ires, then ra idly for the last 10 seconds. Then it will sto bee ing.
Your alarm system is now armed (ON)
TO DISARM THE SYSTEM:
Enter only through a TIME DELAY area.
The key ad will sound constantly until the alarm system is turned off.
Enter your PIN CODE and ress the # key. Exam le. 1234 #
Make sure the red ARM light on the key ad goes off. Alarm is now OFF.
If the ARM light does not go off, wait for the key ad to bee five times,

then enter your PIN again.
The key ad will bee twice to confirm that the system has been disarmed
How to arm & disarm your CK 236i alarm system
with alarmaintenance.com.au