Caberg JUST SPEAK EVO User manual

1.
2.
3.
4.
Remove the inner linings as
indicated in the communicator’s
user manual.
Place the right speaker (R) in its
seat on the velcro.
Repeat the operations performed
for the right (R) speaker for
positioning the left (L).
Placethemicrophonebaseunder
thechinstrapbetweenEPSand
shell.Usetheadditionalmicrophone
supportincluded bypositioningit
astheimage.
ASSEMBLY
INSTRUCTION

5.
6.
7.
Adjust the microphone’s position by
deforming its boom.
WARNING: check that the triangle
on the microphone is facing the
mouth.
Assemble the inner linings
making sure that the microphone,
remote control and USB cable are
accessible from outside the helmet.
Place the USB socket between the
inner linings and the shell.
Stick the remote control on the
side of the shell verifying the
correct adhesion.
ASSEMBLY
INSTRUCTION