Cadco CDR-1TFB User manual

Cadco, Ltd.
200 International Way, Winsted, CT 06098
[phone] l Fax [phone]
We site: cadco-ltd.com
E-mail: [email protected]
CDR-2CFB
120 Volts / 1800 Watts
(900 Watts per burner) /
15 Amps / Single Phase
4
4/17/2020 RV05
WARRANTY
adco warrants that this Hot Plate be free from defects in material and
workmanship for a period of one year from date of purchase. (Warranty provides
repair of unit.) A copy of your original purchase receipt is required for proof of
purchase date. This warranty does not cover consequential dama e of any
kind or damages resulting from accident, misuse, abuse, or external service or
repair attempts by unauthorized personnel. Inquiries concerning this warranty
and the use and maintenance of this unit should be directed to adco, Ltd.
Please note: This appliance is a carry-in service item; customer is
responsible for packa in the unit securely and returnin it to Cadco* for
service, along with a copy of your original purchase receipt, a description of the
problem, and your name, shipping address and phone number. Ship to: adco,
Ltd., Attn: REPAIR, 200 International Way, Winsted, T 06098. If shipping the
unit for service, we recommend that you insure it for its original purchase price.
adco is not responsible for damage or loss of unit in transit to us.
Call Cadco at 860-738-2500 for Return Authorization Number BEFORE
returnin any item for repair. Return Authorization Number MUST be written
on outside of carton to track the unit and avoid service delays. Warranty
covers repairin the unit and returnin it to customer.
Warranty is applicable only in USA and anada*. (* anadian customers
contact Tarrison Products, Ltd. in Ontario, Tel. [phone].)
IMPORTANT NOTES:
Date of Purchase: __________________________
Place of Purchase: ____________________________________________
To expedite all warranty claims please keep your dated sales receipt from
place of purchase.
Use & Care Manual
Models CDR-1TFB, CDR-2TFB, CDR-2CFB, & CDR-3K
Space Saver Hot Plates
CDR-1TFB
120 Volts / 1650 Watts
(825 Watts per burner) /
13.8 Amps / Single Phase
CDR-2TFB
220 Volts / 3000 Watts
(1500 Watts per burner) /
13.6 Amps / Single Phase
CDR-3K
220 Volts / 3000 Watts
(1500 Watts per burner) /
13.7 Amps / Single Phase
3. Use damp cloth with mild detergent to clean stainless surtaces - NEVER
USE ABRASIVES OR STEEL WOOL ON FINISHED SURFA ES. To polish,
use a non-abrasive glass cleaner.
CLEANING & MAINTENANCE INSTRUCTIONS (continued)
4. Thoroughly wipe soap and water from surface of hot plate and heating
element. DO NOT IMMERSE UNIT IN LIQUID. Make sure that no water can
infiltrate the heat vents or the bottom of unit.
5. Leave unit unplugged when not in use.

OPERATING INSTRUCTIONS
1. Avoid lettin water or food drop or boil over onto heatin element.
If liquids or other forei n material are allowed to drip down throu h
the element pan and into the housin , the warranty is voided.
2. Rocker switch light will come on when hot plate is plugged into electric outlet
and the rocker switch is put in ON position.
Round signal light(s) will come on when heat control knob is turned fromOFF
to a heat setting. They will cycle on & off as the element maintains temperature.
3. As with all countertop hot plates as well as stovetops, the most efficient
cooking/heating will be done when using pans that are closest in diameter
to the heating element. For best results, the pot or pan used should not
exceed the heating element diameter.
NOTE: Max load capacity of 15 pounds per burner on 120V models.
If using a stockpot or braising pan, no larger than a 1 overhang over element
diameter.
DR-1TFB: 6 diameter coil elements
DR-2TFB: 8 diameter coil elements
DR-2 FB: 7-1/2 diameter solid cast ironelements
DR-3K: 9 diameter solid cast iron elements
4. Be sure your Hot Plate is resting level on countertop. Avoid using pans that
are unstable and easily tipped.
5. To avoid excessive heat on wall(s) while cookin , always keep a space
of at least 4 between your hot plate and your rear and side walls.
6. Always place the appliance on a heat-resistant surface.
7. (CDR-2CFB & CDR-3K): When you are finished cooking, we recommend
that the temperature control switch(es) be turned off, and the On/Off power
switch be left on for the cooling fan to operate until the unit has cooled down.
This will help extend the life of your hot plate.
CLEANING & MAINTENANCE INSTRUCTIONS
1. Always unplug hot plate from electric outlet and allow to cool before
cleaning. Caution: Heatin element may be hot without lowin red. Be
sure element is cool before touchin .
2. oil models: clean the elements by gripping an element at the point opposite
where it goes into the holes in the drip pan and tilting it up. (Do not force
it up higher than it will go easily.) lean the element and drip area. If
liquids or other forei n material are allowed to drip down throu h the
element pan and into the housin , the warranty is voided.
23
ongratulations on your purchase of a adco Hot Plate. Please read all
instructions carefully before use.
IMPORTANT SAFEGUARDS
1. Read all instructions before use.
2. Do not touch hot surfaces! Always use hot pad or pot holder until unit cools.
3. To protect against electrical hazards, do not immerse cord, plug, or range
in water or any other liquid.
4. lose supervision is necessary when any appliance is used by or near
children.
5. Unplug from outlet before cleaning. Allow to cool completely before
putting on or taking off parts.
6. Do not operate any appliance with a damaged cord or plug or, or if the
appliance malfunctions or has been damaged in any manner. all Factory
Service at 860-738-2500. In anada call [phone].
7. Do not use outdoors.
8. Do not let cord hang over edge of table or counter or touch hot surfaces.
9. Do not use appliance for other than intended use.
10. Do not clean with metal scouring pads. Pieces can break off the pad and
touch electrical parts, creating a shock hazard.
11. A fire may occur if this appliance is covered or touching flammable
material, including curtains, walls, etc., when in operation. To avoid
excessive heat on wall(s) while cookin , always keep a space of at
least 4 between your ran e and your rear and side walls.
12. Do not use plastic dishes or plastic wraps on heatin elements.
SAVE THESE INSTRUCTIONS
IMPORTANT NOTES
1. Your unit is equipped with a grounded, current-carrying plug. This plug
will fit into any 3 pronged outlet. This is a safety feature.
2. Electrical connection must be a proper outlet for the 3 pron ed cord.
Before connectin power, make sure the volta e and frequency
correspond to the data plate on the unit.
3. A short power cord is provided to reduce the hazards resulting from
accidents such as tripping, entanglement, etc.
-If a long cord set or extension cord is used:
(A) The marketed electrical rating of the cord set or extension cord should
be at least as great as the electrical rating of the appliance.
(B) The longer cord should be arranoed so that it will not drape over the
countertop or tabletop, where it can be pulled on by children or tripped over
accidentally.
4. When performing any cleaning or maintenance to this unit, be sure to
unplug from power outlet first, and allow to cool.
5. all adco ustomer Service at 860-738-2500 with any questions or
service needs.
INITIAL USE
Heat the appliance without a pot for approximately 10 minutes at maximum
setting in order for the special element coating to seal. Temporary smoking is
normal during initial use.