Cadco CSR-RH User manual

CARE AND CLEANING
1. The longer you cook with a spill or food residue on the cooking surface, the
harder it will be to remove. Wait until unit is completely cool before cleaning
(except for the situation in item 2 below. Some cleaners will produce harmful
fumes when applied to a hot surface. Wet sponges or cloths used to wipe spills
from a hot cooking surface can cause steam burns.
2. In case any plastic objects, aluminum foil, sugary mixtures,
etc. accidentally melt or spill on the glass ceramic cooking
surface, immediately turn the unit off and remove cookware.
Let the surface cool slightly. While still quite arm, use a
hot mitt and a razor blade scraper held at a 30° angle to care-
fully scrape melted / spilled material away from the warm heating zone.
Allow cooking surface to cool completely before continuing with cleanup.
3. Unplug the hot plate before cleaning. Never use oven sprays, stain-removers,
ammonia, bleach, abrasive scouring agents, steel wool, or treated nylon mesh
pads for cleaning. For maintaining the glass ceramic cooking surface, use one
of the special Ceramic Glass Cooktop cleaning /polishing/conditioning cremes
available on the market. (Do not use cleaners made for white cooktops; they will
damage your unit. Normal food residues can be removed with a soft, damp cloth
or untreated nylon mesh pad and some mild dishwashing liquid or baking soda.
Scrub gently, rinse with a damp cloth, and wipe dry.
4. DO NOT SUBMERGE THE HOT PLATE OR LET THE HEAT CONTROL OR
PLUG COME IN CONTACT WITH WATER OR OTHER LIQUID! Make sure that
no liquids or steam seep into the underside of the hot plate housing.
5. Avoid scratches on the glass ceramic cooking surface caused by pointed or
sharp objects. Protect the glass ceramic plate against breakage by falling objects.
6. Any repair or maintenance required for this product other than normal household
care and cleaning, should be performed by our Factory or Tarrison Products Ltd.
in Ontario, Canada.
Infrared Hot Plate
Featuring Radiant Heat Technology
for Rapid Heat
Use & Care Manual
Model CSR-RH
Cadco, Ltd.
200 International Way, Winsted, CT 06098
(860 738-2500 l Fax [phone]
Website: www.cadco-ltd.com
E-mail: [email protected]
5/22/2018 RV00
4
We recommend that you record the following information for warranty purposes:
Purchase Date:_____________Dealer:__________________________
To expedite all arranty claims please keep your dated sales receipt from
place of purchase.
120 volts - 1500 watts- 12.5 amps
WARRANTY
Cadco warrants that this Hot Plate be free from defects in material and
workmanship for a period of one year from date of purchase. (Warranty provides
repair of unit. A copy of your original purchase receipt is required for proof of
purchase date. This warranty does not cover consequential damage of any
kind or damages resulting from accident, misuse, abuse, or external service or
repair attempts by unauthorized personnel. Inquiries concerning this warranty
and the use and maintenance of this unit should be directed to Cadco, Ltd.
Please note: This appliance is a carry-in service item; customer is
responsible for packaging the unit securely and returning it to Cadco* for
service, along with a copy of your original purchase receipt, a description of the
problem, and your name, shipping address and phone number. Ship to: Cadco,
Ltd., Attn: REPAIR, 200 International Way, Winsted, CT 06098. If shipping the
unit for service, we recommend that you insure it for its original purchase price.
Cadco is not responsible for damage or loss of unit in transit to us.
Call Cadco at 860-738-2500 for Return Authorization Number BEFORE
returning any item for repair. Return Authorization Number MUST be ritten
on outside of carton to track the unit and avoid service delays. Warranty
covers repairing the unit and returning it to customer.
Warranty is applicable only in USA and Canada*. (*Canadian customers
contact Tarrison Products Ltd. in Ontario, Tel. [phone].

OPERATING INSTRUCTIONS
1. Before using for the first time, become familiar with the Infrared Hot Plate
features, (Figure A :
2. This hot plate is equipped with an automatic cooking system, i.e. it heats up
to each setting quickly with its maximum power and then maintains the temperature.
3. Use the settings as follows:
1-5 - for warming up and keeping warm
4-9 - for moderate temperature cooking
8-12 - for high temperature cooking
4. Rocker switch light will come on when hot plate is plugged into electric outlet
and the rocker switch is put in ON position.
5. Right round signal light will come on when heat control knob is turned from
OFF to a heat setting.
Left round signal light will cycle on & off as the element maintains temperature.
6.
Only use pots or pans with a perfect, even bottom and an appropriate diameter.
If the pot bottom is uneven or too small, energy will be wasted. Do not use cooking
containers consisting of synthetic material, inferior enamel, china, or aluminum foil
in any form. If an aluminum pot or pan is used, it must not be allowed to boil dry,
or the pan will warp or melt and the hot plate cooking surface will be permanently
damaged. Always use a pot, pan, or casserole dish for its intended purpose. Only
certain types of glass, glass/ceramic, ceramic, earthenware, or other glazed cookware
are suitable for cooktop use without breaking due to the sudden change in temp-
erature. Check the cookware manufacturer's recommendations for cooktop use.
7. The glass ceramic cooking surface and the pot bottom must always be clean
and dry. Rough-bottomed cookware can scratch the hot plates heating surface.
8. Cover cookware while in use whenever possible to avoid spatters on cooktop.
9. Do not place food directly on the cooking surface. Always use cookware.
10.During use the surfaces will get hot. Please use caution when handling the
appliance to avoid the risk of getting burned! Keep the power cord away from the
cooking plate, as well as the power cords of other adjacent electrical appliances.
In case of signs of damage to the appliance, the power cord or the sealing, or if
the glass plate is broken, immediately unplug the appliance.
Figure A
Temperature
Control Knob
Heating Zone
( 9diameter
Congratulations on your purchase of Cadcos Infrared Hot Plate!
You have chosen a very special hot plate with the advantages of a glass ceramic
heating surface combined with a high-grade stainless steel casing.
IMPORTANT SAFEGUARDS
To reduce the risk of personal injury or property damage when using electrical
appliances, basic safety precautions should always be followed, including the
following:
1. READ ALL INSTRUCTIONS BEFORE USE.
2. Do not touch hot surfaces! Always use hot pads or pot holders until unit cools.
3. To protect against electrical shock, do not immerse unit, cord or plug in water
or other liquid.
4. Close supervision is necessary when any appliance is used by or near
children.
5. Unplug from outlet when not in use and before cleaning. Allow to cool
completely before putting on or taking off parts, and before cleaning or storing
the appliance.
6. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions or has been damaged in any manner. Return the
appliance to the Cadco Factory Service Department (call 860-738-2500
first for examination, repair or adjustment. (*Canadian customers contact
Tarrison Products Ltd. in Ontario, Tel. [phone].
7. The use of accessory attachments not recommended by the appliance
manufacturer may cause injuries.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter or touch hot surfaces.
10. Do not place on or near a hot gas or electric burner or in a heated oven.
11. Place unit on a heat-resistant, stable and plain working surface. The space
above the appliance must be free and the distance from the wall must be
at least 4 on all sides to ensure unhindered air circulation.
12. Overheated fat or oil can ignite. This is why foods containing fat or oil must
be prepared under supervision only.
13. It is recommended that this appliance not be moved when the pot or pan
on it contains hot oil or other hot liquid.
14. Do not clean with metal scouring pads. They can scratch and ruin the
finish of your unit.
15. Do not use appliance for other than intended use.
16. Do not use cooking containers consisting of inferior enamel, synthetic
material, china, or aluminum foil. DO NOT USE PLASTIC WRAP.
SAVE THESE INSTRUCTIONS
This product is for household use only.
NOTE: A short power supply cord (or cord set has been provided to reduce the
hazards resulting from becoming entangled in or tripping over a longer cord. Longer
cord sets or extension cords may be used if care is properly exercised in their use. If
a long cord set or extension cord is used, the marked electrical rating of the cord set
or extension cord should be at least as great as the electrical rating of the appliance.
The longer cord should be arranged so that it will not drape over the counter top or
table top where it can be pulled on by children or tripped over accidentally.
This unit is equipped with a grounded, 3-pronged commercial plug. For safety, this plug
MUST be connected to a 3 pronged outlet. Before connecting power, make sure the
outlets voltage and frequency correspond to the data plate on the hot plate (120V/60hz.
23
Glass Ceramic
Cooking Surface
POWER
ON/OFF
Rocker Switch
Right Round Signal Light
Left Round Signal Light