Caframo Kona 817CA User manual

MODEL 817CA
817CA-WBX white12 V
817CA24-WBX white 24 V
WEATHERPROOF MARINE FAN
Kona

Thank you for purchasing a Caframo Kona Fan
Read and Save these Instructions
Installation: Remove permanent installation bracket from fan base.
For quick mounting apply moistened suction cup to a clean dry at surface for
best adhesion. Feed cam lock through fan base, rotate the fan 90 ° and lock
suction cup into position.
For permanent installation use four # 8 machine screws (not included) to
mount installation bracket and screw down fan base.
Operation: The blade must be clear of any obstructions that would cause the
blade to jam. Secure cam lock tilt mechanism in position before turning on.
Rotate control knob clockwise to increase speed. Rotate control knob
counter clockwise to turn o.
Care and Maintenance: Do not use suction cup if severe jarring conditions
exist. Can be used outdoors, resists splashing. Do not immerse in water.
Warning: Do not position too close to any objects that may be drawn into
the blades and stop the air ow.
Do not use if power supply cord becomes frayed or brittle.
Do not use gasoline, thinners or other harsh chemicals to clean fan.
Do not use near replaces, furnaces, stoves or high temperature heat.
Specications
Current Draw - 12 volts: 0.21, 0.26 and 0.37 amps (3 speed)
24 volts: 0.11 to 0.18 amps (Variable speed)
Ingress Protection Rating: IP55 against dust and spray
Cam lock
Suction cup
Fan base
Cam lock tilt mechanism
Permanent installation bracket
Kona
Discover other boat hatches and ventilation on our website.