Caliber MCD 782 User manual

CAR MULTIMEDIA SYSTEM
DVD/MPEG4 PLAYER
MCD 782
INSTRUCTION MANUAL
AV
IN
MODE
GOTO
6
TA
ST
1 4
RDM
2
INT
5
BND
AF
REG
PTY
LOC
RPT
AS PS/
MIC
DVD/VCD/CD/CD-R/CD-RW/MP3/MPEG4 Compatible
AV Output Socket
Sub-woofer Output Socket
Front panel AV input
SD/MMC Memory card slot
Front Panel USB Input Port
4x75WHighPowerOutput
FM Stereo Radio
RDS (Radio Broadcast System) Function
3” Widescreen Digital TFT LCD Display
Anti-Shock Mechanism
PLL Synthesizer Tuner
ISO Connectors for Power Supply and Speaker Outputs
Built-in Bluetooth hands-free system

CONTENTS
Safety Information.........................................01
Installation....................................................02
Using The Detachable Front Panel..............04
Wiring Diagram.............................................05
Operations....................................................06
Setup............................................................21
Attachment...................................................24
Trouble Shooting..........................................25
Specifications...............................................26
Location and Function of Keys ...................... 06
Using The Remote Control.............................07
General Operations......................................08
Radio Operations.........................................09
RDS(Radio Data System) Operations.............10
AV Menu Settings.........................................11
Disc Operations...........................................12
Special Disc Operations................................15
Data Disc Play Operations ...........................17
USB Operations...........................................18
SD/MMC Memory Card Operations................18
AV IN Operations........................................18
Bluetooth Hands-free Function......................19
System Setup.................................................21
Language Setup.............................................23
Audio Setup...................................................23
Digital Setup..................................................23

CAUTION:
WARNING:
Region Management Information
Mobile DVD player is a class 1 laser
product. However this mobile DVD player
uses a visible/invisible laser beam which
could cause hazardous radiation
exposure if directed. Be sure to operate
the mobile DVD player correctly as
instructed.
Use of controls or adjustments or
performance of procedures other than
those specified herein may result in
hazardous radiation exposure.
Do not open covers and do not repair
yourself. Refer servicing to qualified
personnel.
- To reduce the risk of fire or electric
shock, do not expose this equipment to
rain or moisture.
- To reduce the risk of fire or electric
shock, and annoying interference, use
only the recommended accessories.
- This device is intended for continuous
operation.
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by macro vision Corporation and
other rights owners. Use of this
copyright protection technology must be
authorized by Macro vision Corporation,
and is intended for home and other
limited viewing uses only unless
otherwise authorized by Macro vision
Corporation. Reverse engineering or
disassembly is prohibited.
Region Management Information: This
Mobile DVD Player is designed and
manufactured to respond to the Region
Management Information that is
recorded on a DVD disc. If the Region
number described on the DVD disc does
not correspond to the Region number of
this Mobile DVD Player, this Mobile DVD
Player cannot play this disc.
Safety Information DISC NOTES
Disc formats supported by this player
Handling and Cleaning
Disc Cleaning
- Dirt, dust, scratches and warping discs
will cause disoperation.
- Do not place stickers or make scratches
on discs.
- Do not warp discs.
- A disc should always be kept in its case
when not in use to prevent from damage.
- Do not place discs in the following
places:
1. Direct sunlight.
2. Dirty, dusty and damp areas.
3.Near car heaters.
4.On the seats or dashboard.
Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, Use a soft cloth
slightly moistures with isopropyl
(rubbing) alcohol. Never use solvents
such as benzene, thinner or conventional
record cleaners as they may mar the
surface of the disc.
A disc may become somewhat
scratched (although not enough to make
it unusable) depending on the way it is
handled and conditions in the usage
environment. Note these scratches are
not an indication of any problem with the
player.
Note:

Notes:
- Choose the mounting location where
the unit will not interfere with the normal
driving function of the driver.
- Before finally installing the unit, connect
the wiring temporarily and make sure it is
all connected up properly and the unit
and the system work properly.
- Use only the parts included with the unit
to ensure proper installation. The use of
unauthorized parts can cause
malfunctions.
- Consult with your nearest dealer if
installation requires the drilling of holes
or other modifications of the vehicle.
- Install the unit where it does not get in
the driver's way and cannot injure the
passenger if there is a sudden stop, like
an emergency stop.
- If installation ang e exceeds 30°from
horizontal, the unit might not give its
optimum performance
l
.
- Avoid installing the unit where it would
be subject to high temperature, such as
from direct sunlight, or from hot air, from
the heater, or where it would be subject to
dust, dirt or excessive vibration.
Din Front/Rear-Mount
This unit can be properly installed
either from 'Front' (conventional DIN
Front-mount) or 'Rear' (DIN Rear-mount
installation, utilizing threaded screw
Holes at the sides of the unit chassis).
For details, refer to the following
illustrated installation methods.
Installation
Preparing New Discs with Rough
Spots
A new disc may have rough edges on its
inside and outside edges. If a disc with
rough edges is used, the proper setting
will not be performed and the player will
not play the disc. Therefore, remove the
rough edges in advance by using a
ballpoint pen or pencil as shown on the
right. To remove the rough edges, press
the side of the pen or pencil against the
inside and outside edges of the disc.
Take Out Screw Before Installation
Before install the unit, please remove
the two screws.

7. Reconnect the wire harness and the
antenna and be careful not to pinch any
wires or cables.
8. Slide the unit into the sleeve until it
locks into place.
9. To further secure the unit, use the
supplied metal strap to secure the back
of the unit in place. Use the supplied
hardware (Hex Nut (M5mm) and Spring
Washer) to attach one end of the strap to
the mounting bolt on the back of the unit.
If necessary, bend the metal strap to fit
your vehicle's mounting area. Then use
the supplied hardware (Tapping Screw
(5x25mm) and Plain Washer) to attach
the other end of metal strap to a solid
metal part of the vehicle under the
dashboard. This strap also helps ensure
proper electrical grounding of the unit.
Note to install the short threading
terminal of the mounting bolt to the back
of the unit and the other long threading
terminal to the dashboard.
6. Mount the sleeve by inserting the
sleeve into the opening of the dashboard
and bend open the tabs located around
the sleeve with a screwdriver. Not all tabs
will be able to make contact, so examine
which ones will be most effective.
Bending open the appropriate tabs
behind the dashboard to secure the
sleeve in place.
1. DIN FRONT-MOUNT (Method A)
Installing the unit
Be sure you test all connections first,
and then follow these steps to install the
unit.
1. Make sure the ignition is turned off,
and then disconnect the cable from the
vehicle battery's negative (-) terminal.
2. Disconnect the wire harness and the
antenna.
3. Press the OPEN ( ) button to remove
the control panel (For details, refer to
'USING THE DETACHABLE FRONT
PANEL').
4. Lift the top of the outer trim ring then
pull it out to remove it.
5. Use the two supplied release keys to
remove the unit from the mounting
bracket. Insert the left (“L”) and right
(“R”) release keys as far as they will go
(with the notches facing up) into the
appropriate slots at the middle left and
right sides of the unit. Then slide the
sleeve off the back.
Installation Opening
This unit can be installed in any
dashboard having an opening as shown
below:
182 mm
53 mm
10. Reconnect the cable to the vehicle
battery's negative (-) terminal.
Then replace the outer trim ring and
install the unit's front panel.
Notch

If your vehicle is a Nissan, Toyota, follow
this mounting instruction. Use the screw
holes marked T (Toyota), N (Nissan)
located on both sides of the unit to fasten
the unit to the factory radio mounting
brackets supplied with your vehicle.
Fasten the unit to the factory radio
mounting brackets. Align the screw holes
on the bracket with the screw holes on
the unit, and then tighten the screws
(5x5mm) on each side.
Note: the outer trim ring, sleeve and the
metal strap are not used for method B
installation.
2. DIN REAR-MOUNT (Method B)
Removing the unit
1. Make sure the ignition is turned off,
and then disconnect the cable from the
vehicle battery's negative (-) terminal.
2. Remove the metal strap attached the
back of the unit (if attached).
3. Press the release button to remove the
front panel.
4. Lift the top of the outer trim ring then
pull it out to remove it.
5. Insert both of the supplied keys into
the slots at the middle left and right sides
of the unit then pull the unit out of the
dashboard.
Using The Detachable Front Panel
2 Grasp the right side of the front panel,
then gently push the front panel towards
the left side before pulling it out from the
unit.
.
3 Store the front panel in the protective
case provided for safe keeping.
.
REMOVING AND PROTECTING
DETACHABLE FRONT PANEL
1
2
front panel
front panel
OPEN button
protective case
TO ATTACH THE FRONT PANEL
Hold the right side of the front panel with the
plate facing down.
First attach the left side of the front panel to
the unit by inserting the hole into the left holder.
Then slightly push it leftwards and attach the
right side hole into the right holder.
Finally push up the front panel.
The front panel of the unit may be removed
as a theft deterrent. After removing the
front panel, use the case provided to keep
the front panel from getting damaged.
1 Press the OPEN button to flip down
the front panel.
.

Wiring Diagram
The “PINK/BLACK PARKING BRAKE” wire must be connected to the parking brake system of your
vehicle. The unit will only play videos when the parking brake system is engaged, if the parking
brake system is not engaged, the TFT screen will display the message “
”. This is a safety feature designed to prevent the driver from watching a video while
driving. The video output of this unit is not affected by this.
Note:
In radio,disc playing mode, the images will be displayed on the screen whether or not the parking
brake system is engaged.
DISABLED WHILE
DRIVING
WHITE
WHITE / BLACK
GREEN
GREEN / BLACK
VIOLET
VIOLET / BLACK
GREY
GREY / BLACK
FRONT
LEFT
SPEAKER
REAR
RIGHT
SPEAKER
MEMORY B+
GROUND B-
ACC B+ BLUE TO ANTENNA
RED
YELLOW
FRONT
REAR
PINK/BLACK TO PARKING BRAKE B-
Radio Antenna Socket
White: Front Left CH RCA output
Red : Front Right CH RCA output
Yellow: Video Output Socket 1
Yellow: Video Output Socket 2
White: Rear Left CH RCA output Socket
Red : Rear Right CH RCA output Socket
Green : Subwoofer output Socket
Connecting the Parking brake wire to the vehicle’s parking brake system
Parking Brake
Parking Brake switch
(Activated by parking brake)
Parking Brake wire from car DVD player (Pink/Black)
To metal body part or chassis ground of your car
Car Battery
Parking brake
indicator Light
Bluetooth Antenna
ISO CONNECTOR
BLACK

23
22
25
21
24
1
2
39
10
15
16
5
8
6
1112
13
17 18
20
19
4
7
14
AV
IN
MODE
GOTO
6
TA
ST
1 4
RDM
2
INT
5
BND
AF
REG
PTY
LOC
RPT
AS PS/
MIC

Remark:
♦
♦
♦
♦
Before you using the remote control,
please take the transparent insulator
slice off the bottom of remote control.
Point the remote control at the remote
sensor within 2 meters.
It may not be possible to operate the
remote control if the remote control
sensor is exposed to direct sunlight.
Operation angle: about ±30°in each the
direction of the front of the remote
sensor.
- The remote control is a small,
lightweight precision device. To avoid
damage, short battery life, operational
errors and poor response, observe the
following.
- Do not subject the remote control to
excessive shock.
- Do not put in a trouser pocket.
- Keep away from food, moisture and
dirt.
- Do not place in direct sunshine.
Using The Remote Control
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
Power ( ) Button, MUTE Button
DISP(Display)
A-B Button
RPT (Repeat) Button
ZOOM(Zoom in /Zoom out) Button
Cursor Buttons ( )
ENTER Button
SETUP Button, BT MENU Button
Tune down, Seek down, track prevous Button
Tune up, Seek up, track next Button
TITLE( DVD Title Menu) / PBC(Playback Control) Button
(Play/Pause) Button
Pre-set M1~M6 Button, Numeric 1~6 Button
TA (Traffic Announcement) Button, Numeric 7 Button
AF(List of Alternative Frequencies) Button,
REG(Regional Program) Button, Numeric 8 Button
MODE Button
AUDIO(Audio Setup Select) Button
SUB-T(Subtitle Language select) Button
Button
,ANGLE( ) Button
Volume +/- Button
MENU Button
Camera angle selection for some disc
◄/►,▲/▼
Descriptions of Function Controls
Fast Forward Button, Button
Fast Reverse Button, # Button
GOTO Button
AS/PS (Automatic Search & Preset memory Scan) Button
(Stop) Button, DEL (Delete) Button
PROG(Programmed play mode) , LOC/DX Button
RDM (Random) Button, MO/ST Button
Numeric 0,+ Button, BAND Button
PTY(Program Type) Button, Numeric 9 Button
(23)
(24)
(25)
(26)
(27)
(28)
(29)
(30)
Battery replacement
Battery type: a button cell lithium battery
(CR2025 3V)
1. Remove the battery holder by
pressing the locking tab with your thumb
and pulling it out.
12
18
14
1
2
3
15
17
27
5
SETUP
GOTO
PROG
RDM
0+
TITLE
TRK/TUN
98
7
123
6
5
4
VOL
A-B RPT SUB-T AUDIO
MUTE
ZOOM
ANGLE
DISP MODE
ENTER
MENU
BAND
16
4
6
7
8
9
10
11
13
19
20
21
22
23
24
25
26
BT MENU
DEL
AF/REGTA PTY
28
29
30
A
B

3. Closing the cover
Gently push in the holder until securely
locked into place.
2. Replacing the battery
Replace the battery with the same type
and the (+) side facing up.
Reset the unit
Power on/off
Adjusting the volume level
Operating the unit for the first time, after
replacing the car battery or changing the
connections, you must reset the unit.
1.Turn off the unit power.
2.Press the ( ) button and
remove the front panel, then press the
button with a ballpoint or similar
object to restore the unit to the original
factory settings.
In power off mode, switch on the unit by
pressing any button except the
button and the ( ) button or
inserting a disc to disc slot USB device
to USB port or SD/MMC card to card slot.
When the system is on, press and hold
the ( ) button long to turn off
the unit.
Rotate the knob on the head unit,
or use the or button on the
remote control to adjust volume level.
OPEN
RESET
OPEN
EJECT
,
POWER
VOL+/-
VOL+ VOL-
ESP function
Anti-theft LED Indicator
Mute on/off
Designed as a theft deterrent, the red
LED will flash when the unit is turned off
and the front panel is removed.
When the unit is switched on, press the
button to turn off the sound
instantly. Press the again to return
it to the prior sound level.
MUTE
MUTE
This car DVD player has the electronic
shockproof feature. So that if the unit
skips due to rough road conditions, the
music or video will be uninterrupted.
In power on mode, press button
repeatedly to select the different modes
in the following sequence: DISC(with a
disc inside the disc slot), USB(with USB
device inserted),SD/MMC(with SD/MMC
card inserted), BT, AV IN, TUNER mode.
To select playback mode
MODE
General Operations

Radio Operations
07 12:
VOL 25
RADIO
107.15
FM1 STEREO LOC
MHZ 2
Frequency
Radio band
Stereo/mono Local/distant
Preset station
number
Volume Clock
Last position memory feature
- During disc, USB, SD/MMC card
playback, press and hold the
button to turn off the unit, when you next
switch on it, the unit will resume playing
from the point that it was interrupted.
POWER
-During disc, USB, SD/MMC card
playback, press the button to
switch to a different mode, when you next
return to the previous disc, USB,
SD/MMC card playback mode again, the
unit will resume playing from the point
that it was interrupted.
MODE
To select the radio mode
Press the button to select the
radio mode. You will see the following
radio screen on the
one of the three
MODE
TFT screen.
In radio mode, Press the button
repeatedly to select
radio broadcasting bands: ->FM 1-> FM 2
-> FM 3 ->.
Press the or button, the automatic
search will start. It will search upward or
downward for the strong signal radio
station within the current band.
To select a radio band
Auto/ Manual tuning
BAND
- Automatic search mode:
Press and hold the or button until
“MANU” appears on the TFT screen, it
will change into manual searching mode.
Press the or button repeatedly to
manually search upward or downward
step by step for the desired radio station
within the current band. For fast manual
searching, press and hold the or
button.
In manual search process, if the both
buttons haven’t been pressed within 5
seconds, it will change into automatic
search mode automatically. “MANU”
disappears on the TFT screen.
FM station is received in stereo mode.
However, if the signal weak or reception
is not as good as you would like,
switching to MONO mode usually
improves the overall sound quality
- Manual search mode:
Stereo/Mono
Local/Distant
Press and hold the button on the
head unit or briefly press on the
remote control to choose FM STEREO or
MONO audio effect.
In urban settings, most stations are
strong enough and it should be set in
LOCAL mode.
Switch to DX (distant) mode to search for
stations with weaker signals.
Press and hold the button on
the head unit or briefly press the LO/DX
button on the remote control to choose
local reception or DX(distant) reception
mode.
You can store up to a total of 18 radio
stations in the memory (18 FM), manually
or automatically.
- Select a band (if needed)
- Select a station by or button,
refer to auto / manual tuning.
-HoldaPre-setbutton( - )forat
least 2 seconds.
- Select a band (if needed).
- Press a preset button ( - ) briefly
to recall the stored station.
TA/ST
MO/ST
PTY/LOC
- To store a station:
M1 M6
- To recall a station:
M1 M6
To store / recall a preset radio stations

Auto store / Preset scan
- Preset scan:
AS/PS
AS/PS
- Auto store:
AS/PS
.
Press the button to scan each
preset station. It will play a station for a
few seconds, then go to next station until
all 6 stations are scanned, finally the
radio will play at the preset station where
scanning started. The preset station
number on the LCD will flash during the
process. When you hear a station that
you wish to listen to, press the
again to stop the preset scanning.
Press and hold the button for
more than 2 seconds to start auto store.
The radio will scan from the lowest
frequency, and automatically store the 6
strongest stations into the preset
memories. When auto store is complete,
the radio will start preset scan to the
stored 6 station
RDS (Radio Data System) Operations
Setting RDS mode
Briefly press the button to turn
the RDS mode on/off.
Whenever RDS is on, symbol “ ”
appears on the TFT screen.
Program name is displayed when
receiving an RDS station.
“ ” starts blinking if the broadcasting
signals getting worse. “ ” will be
displayed when an emergency
broadcasting is received, meanwhile
sound output level will be automatcially
adjusted to the preset output level when
the volume level is set at minimum.
segment
AF/REG
AF
AF
ALARM
AF( alternative frequency) function
Press button short to switch AF
mode on or off. There are 3 state of the
AF on the LCD display:
AF switching mode
off.
AF switching mode
on, and has RDS information.
AF switching
mode is on, but RDS information is not
received yet.
AF/REG
“”
Segment “AF” off:
Segment “AF” on:
Segment “AF” flashing:
When AF switching mode is selected, the
radio checks the signal strength of the AF
all the time. The interval of checking time
of each AFs depends on the signal
strength of current station, from a few
minute for strong station to few seconds
for weak station. Every time that new AF
is stronger than current station, it
switches over to that frequency for very
short time. Because the mute time of AF
switching or checking time is very short,
it is almost inaudible in case of normal
program. During FM mode, when AF is
on, manual store, Auto store/preset scan
function can only receive and save RDS
program.
Press and hold the button for 2
seconds to switch on or off region mode.
Some broadcasting stations change their
program from normal broadcasting to
regional broadcasting for a certain time
period.
When region is on, the current listening
program remains unchanged. When
region is off, it allows the reception
moved to the regional station.
REG(Regional Program) function
AF/REG
TA(Traffic Announcement) Function
Briefly press the button to turn
search mode on or off.
When search mode is on and a traffic
announcement is transmitted:
- Switch to the traffic announcement
mode from any audio mode including
DVD(CD/MPEG4/MP3), USB/SD/MMC or
AV IN.
- Switch on the traffic announcement
automatically when the receiver is in a
waiting reception mode and the audio
signal is muted.
- When the traffic announcement is
over, the initial operation mode will be
restored.
- If the volume level was under the
threshold point it will be raised to the
threshold point.
- When mode is on, segment is
turned on.
- When a TP station is
received,segment “TP” is turned on.
TA TA
TA
,
TA “TA”

TA interruption function
The current traffic announcement is
cancelled by pressing the button. But
the mode will not be off.
TA
TA
To select program type
Briefly press the button to enter or
exit the program type list. After turing on
the PTY list, the display as follows:
Press the / button on the head unit
or ▲/▼ button on the remote control, you
can select different program types as
follows:
NEWS -> AFFAIRS -> INFO -> SPORT
-> EDUCATE -> DRAMA -> CULTURE ->
SCIENCE -> VARIED -> POP M ->
ROCKM->EASYM->LIGHTM->
CLASSICS -> OTHER M -> WEATHER ->
FINANCE -> CHILDREN -> SOCIAL ->
RELIGION -> PHONE IN -> TRAVEL ->
LEISURE -> JAZZ -> COUNTRY M ->
NATIONM->OLDIES->FOLKM->
DOCUMENT -> TEST -> ALARM ->
NEWS
After a few seconds,the unit will search
your selected program type
automatically. The PTY search stops
when the unit finds a station with
the
PTY search automatically exits to normal
mode
PTY
the
selected program type, otherwise,
. During the PTY search process,
press any key to stop the PTY search.
07 12:
VOL 25
RADIO
100.7
FM1 STEREO LOC
MHZ
Frequency
Radio band
Stereo/mono Local/distant
PTY
TA AF REG
AFFAIRS
ALARM
PTY list
HGTES234 ALARM
Current PTY
information
NEWS
AV menu settings
AV Menu Overwiew
VOL+/-
MENU
VOL+/-
ENTER
VOL+/-
VOL+ VOL-
MODE
ZOOM
MENU
You can adjust various settings of the unit
from the AV menu.
The AV menu contains the menu items
and submenus shown in the figure below:
1. Press the knob on the head
unit, or the button on the remote
control to activate AV menu.
2. Press the or button on the head
unit, or ▲/▼/◄/► button on the remote
control to select a menu item (AUDIO,
PICTURE, SETUP).
3. Press the knob on the head
unit, or the button on the remote
control to access your selected menu
item.
4. Rotate the knob on the head
unit, or press the or button on
the remote control to adjust the item you
have selected.
5. Repeat steps 2 ,3 and 4 to adjust other
items if necessary.
6. Press the button on the head
unit or button on the remote
control to return to the previous menu.
7. Press the button on the remote
control to finish the procedure.
Hour Minute
MENU
AUDIO
PICTURE
SETUP
PICTURE
BRIGHT
CONTRAST
COLOR
32
32
32
TINT
DISP.M
DEFAULT
16:9
32
SETUP
SYSTEM
CLOCK
AUDIO
VOLUME
BASS
TREBLE
BALANCE
00
00
00
L.R
FADER
EQ
LOUD
SUB.W
FLAT
OFF
R.F
OFF
SYSTEM
TIME
TIME.M
ON
24
11 : 58
CLOCK

Audio Menu
Volume level:
Bass level:
Treble level:
Balance:
Fader:
Equalization:
Loudness:
Sub-woofer:
1. Press
to select a menu item to adjust.
2.
the item you
have selected.
0~63;
-7~+7;
-7~+7;
15L ~ 15R; This setting adjust
the balance between the left and right
speakers.
15R ~ 15F; This setting adjust the
balance between the front and rear
speakers.
Flat, Classes, Rock, Pop;
You can select a preset equalizer
settings.
on/off; Loudness introduces
a special low- and high-frequency
emphasis at low listening levels.
on/off; This unit is equipped
with a sub-woofer output. If you connect
this output to a powered sub-woofer or
amplifier & sub-woofer system, enable
this output by select ON.
the or button on the head
unit, or ▲/▼/◄/► button on the remote
control
Rotate the knob on the head
unit, or press the or button on
the remote control to adjust
VOL+/-
VOL+ VOL-
PICTURE
BRIGHT
CONTRAST
COLOR
32
32
32
TINT
DISP.M
DEFAULT
16:9
32
16 9:43:
Monitor type
Picture Menu
Bright:
Contrast:
Color:
Tint:
Disp.M: (Display monitor type)
-16:9
- 4:3
Default:
VOL+/-
VOL+ VOL-
1. Press
to select a menu item to adjust.
2.
the item you
have selected.
0 ~ 63; Adjust this setting if the
picture is too bright or too dark.
0 ~ 63; Use this setting to
adjust the contrast of the picture.
0 ~ 63; Use this setting to adjust
the color of the picture.
0 ~ 63; Use this setting to adjust the
tint to make colors appear most natural.
Select a setting which is appropriate to
the monitor you are using.
: Select this when the aspect ratio
of your monitor is 16:9 (widescreen).
: Select this when the aspect ratio
of your monitor is 4:3. If you view a wide
screen picture, the black bars will appear
to fill the left and the right side of the
screen.
Using this setting to make the
picture menu setup restore to factory
status.
After select this menu item, rotate the
knob on the head unit or press
the or button, you can make
the picture setup restore to factory
default setup.
the or button on the head
unit, or ▲/▼/◄/► button on the remote
control
Rotate the knob on the head
unit, or press the or button on
the remote control to adjust
VOL+/-
VOL+ VOL-
AUDIO
VOLUME
BASS
TREBLE
BALANCE
00
00
00
L.R
FADER
EQ
LOUD
SUB.W
FLAT
OFF
R.F
OFF

Setup Menu
Time: ON/OFF
Time. M: 12/24
Clock setting:
VOL+/-
1. Press
to select a menu item to adjust.
2.
the item you
have selected.
Turns the clock display ON/OFF.
Use this menu item to select 12 hour
clock mode or 24 hour clock mode.
Use this menu item to set or make
changes to the time displayed on the
clock after select this menu item,
1. Press
to select hour or minute.
2. Rotate the knob on the head
unit or press the button on the
remote control, you can a just the hour
or minute.
the or button on the head
unit, or ▲/▼/◄/► button on the remote
control
Rotate the knob on the head
unit, or press the or button on
the remote control to adjust
the or button on the head
unit, or ◄/► button on the remote control
▲/▼
d
VOL+/-
VOL+ VOL-
SETUP
SYSTEM
CLOCK
SYSTEM
TIME
TIME.M
ON
24
11:58
CLOCK
Hour Minute
Disc Operations
Loading/Removing a Disc
To select the disc mode
1. Press the ( ) button on the
front panel to flip down the front panel
and then insert a disc into the disc slot
with the label side facing upward; and
close the front panel, the player will play
the disc automatically.
2.To eject the disc, press the ( )
button to open the front panel and then
press the ( ) button.
Press the button to select the disc
mode, if necessarily.
Press the button to display the
following screen.
For MP3/JPEG/MPEG4:
Use the cursor buttons ( ) to
OPEN
OPEN
EJECT
MODE
DISP
Disc Information Screens
When you insert a DVD disc, a screen
with information similar to the one below
will appear when you press and hold the
button.
When you insert a CD, MP3, WMA,
JPEG, or MPEG4 disc, the following
screen appears.
▲/▼/◄/►
SUB-T
8:25
VOL 33
MP3
1/23 00:04:14
DANZA
NTIC SATR
Source
Status
Main display
( MP3 only)
Clock Volume level
PLAY
Playing time
Track
number
[MP3] DANZA.MP3
Information display
Folders list
Files list
Files type

select a file or folder, then press the
button to confirm your selection.
If you select a file, it will be played. If you
select a folder its contents(files) will be
displayed in the file list.
For CD:
Press the or button on the head
unit to skip to the next or previous track.
Press and hold the or button on
the head unit repeatedly or press the
or button on the remote control to fast
forward or fast reverse with different
speed as follows:
2X 4X 8X 20X PLAY
2X 4X 8X 20X PLAY
In fast forward or fast reverse mode,
press the button on the head unit or
remote control to return to normal
playback.
Press the button on the head unit or
remote control to pause disc playback.
Press it again to resume playback.
Press the button on the head unit or
remote control once to stop playback.
Press the button to resume playback.
Press the button twice and then press
the button to stop playback and return
to the first track on the disc.
Use this function when you wish to repeat
a whole disc, a track or a directory on the
disc.
1. Press the button on the head unit
or remote control repeatedly to select the
different repeat modes.
2. For different kinds of disc, pressing the
button has different effects.
ENTER
FORWARD:
BACKWARD:
RPT
RPT
Single Track Selection
Fast Forward / Fast Reverse
Pause Playback
Stopping Playback
Repeat Playback
For CD/VCD/SVCD:
For MP3:
For DVD:
REP 1:
REP DIR:
REP CHAPTER:
REP TITLE:
REP ALL:
REP OFF:
A-B
A-B
A-B
RDM
INT
REP 1 REP ALL REP OFF
REP 1 REP DIR REP ALL REP OFF
REP CHAPTER REP TITILE REP OFF
Note:
Only one track(file) is repeated.
A single folder of tracks(files) is
repeated.
A chapter is repeated.
A titel is repeated.
An entire disc is repeated.
Normal playback mode.
Note: The repeat feature is not supported
for VCD 2.0 discs when PBC(Playback
Control) is on.
A-B repeat allows you to specify a
paragraph of the current track to be
repeated.
1. Press the button to set the starting
point of the section you wish to repeat.
“REPEAT A-” will be visible on the
screen.
2. Press the button to set the end
point of section you wish to repeat.
“REPEAT A-B” will be visible on the
screen.
The unit will repeat the section of the
current track you’ve just chosen from
point “A” to “B”. To return to normal
playback, press the button again. “
A-B CANCEL” will be visible on the
screen.
Press the button on the head unit or
remote control to switch the random
mode ON/OFF. In random mode,
tracks(files) on the disc will be played in
random order.
Press the button to play the first 10
seconds of each track on the current
A-B Repeat (Paragraph repeat mode)
Playing in Random order
Previewing all tracks (Intro scan)(only
for CD/VCD)

disc. Press it again to stop intro scan and
return to normal playback.
Disc Menu Operations
Multi-subtitle Language Function
Menu-driven playback is possible while
playing a disc with menu-driven features
or when playing a VCD with
PBC(Playback Control).
1. Press the button, a title list
or disc menu will appear on the screen.
2.Usecursorbutton( ) to
select a item on the menu you wish to
play, then press the button to
confirm your selection. (Note: On some
disc, you can select the items with the
numeric button.)
Some DVD discs have multiple
languages, allowing you to select the
subtitle language recorded on disc.
Press the button to switch
between the different languages
recorded on the disc.
- Not all discs will allow changing the
subtitle during playback. In these cases,
select the desired subtitle language from
the DVD’s menu.
- There may be delay before the selected
subtitle language appears.
- For some discs, the subtitles will be
displayed even when this is set to off.
- The number of available languages
varies from disc to disc.
TITLE/PBC
ENTER
For DVD:
SUB-T
Notes:
▲/▼/◄/►
Special Disc Operations
Multi-Audio Language
For DVD:
AUDIO
Note:
For VCD/SVCD:
AUDIO
STEREO:
MONO L:
For DVD discs which have multiple
language soundtracks, you can press the
button to switch between the
audio languages recorded on the disc.
- The number of available languages
varies from disc to disc.
- Some discs only contain one
soundtrack language.
- Not all discs will allow changing the
audio language during playback. In these
cases, select audio language from the
DVD’s menu.
Some VCD/SVCD discs which have
multiple audio channels, you can select
the desired audio channel to play by
pressing the button.
Normal stereo (left / right)
playback.
Left audio channel only.
MONO R:
ANGLE
ANGLE
Notes:
Right audio channel only.
Notes:
- some disc only contain one audio channel.
You can view the same scene at different
angles if the disc has been recorded with
multiple viewing angles.
Press the button during playback.
The following information will be shown:
This example indicates that you are
currently viewing the first of three available
camera angles. Press the button to
select a different angle.
- Some time may be required for the angle
to change.
- Depending on the disc, the viewing angle
may switch in one of two ways.
1. Seamless: The angle switches
smoothly.
2. Non-seamless: When the angle is
switched, a still picture is displayed first,
after which the angle switches.
- The number of available viewing angles
varies from disc to disc.
Multi-angle Function

- The function only works for discs having
scenes recorded at different angles.
Press the button repeatedly to
enlarge or reduce the size of image
according to the disc as follows:
ZOOM 2 ZOOM 3 ZOOM 4 ZOOM
1/2 ZOOM1/3 ZOOM1/ 4
ZOOM OFF
In zoom in mode, press the cursor button
( ) to move the zoomed-in area.
Press the button during playback
to activate the programing editing
interface as follows:
1)Usethecursorbutton( )to
select the item that you want to program.
The item you selected will be highlighted.
2) Input the track number that you want to
program using the numeric button (0~9)
on the remote control.
3)Pressthecursorbutton( )to
move to “PLAY” operation button and
then press the button to program
the playback sequence.
ZOOM Function
Programmed Play Function
ZOOM
PROG
For VCD/SVCD/CD:
For DVD/MP3/MPEG4:
ENTER
▲/▼/◄/►
▲/▼/◄/►
▲/▼/◄/►
PROGRAM
PLAY CLEAR
PROGRAM
PLAY CLEAR
On Screen Display
GOTO Function
Press and hold the button during
playback to display information of the
current disc on the screen:
Current title/ Total title;
Current Chapter/ Total Chapter;
Current Track/ Total Track.
Elapsed playing time of the disc;
Remaining time of the disc;
Elapsed playing time of the current
title;
Remaining time of the current title;
Elapsed playing time of the current
chapter;
Remaining time of the current
chapter.
One track repeat playback;
One directory repeat playback;
The whole disc repeat playback;
Exit repeat playback mode;
Press the button, the screen will
display the following message.
For DVD:
For VCD/CD/MP3:
SUB-T
For DVD Disc Information:
For VCD/CD/MP3/JPEG:
1. Disc type
2. Playback information
TT 1/3:
CH1/1:
TRK9/18:
3. Time indication
:
-:
T:
T-:
C:
C-:
4. Audio language or audio channel
indication
5. Subtitle language indication
6. View angle indication
7. Mute indication
8. PBC indication (only for VCD with
PBC)
9. Repeat playback indication
:
:
:
:
GOTO
21 3
5
4 6
78 29
PBC
1 2 3

- To search for a particular Title,
Chapter, or Track
ENTER
- To search for a particular point by
playing time
ENTER
1.Usethecursorbutton( )to
highlight 1 (track number),2(chapter
number) or 4 (VCD track number).
2. Then enter a number with the number
button to input the desired Title/Chapter,
Track, then press the button to
confirm your selection.
1.Usethecursorbutton( )to
move to 3 (time).
2. Use the number buttons on the
remote control to input the elapsed
playing time of the current title or the
disc, and then press the button to
confirm the selection.
▲/▼/◄/►
▲/▼/◄/►
3
PBC
4
When you insert a data disc containing
audio(MP3), movie(MPEG4) or
picture(JPEG) files into the disc slot, the
following main menu will appear:
Press the button on the remote
control to change the source. Press the
button on the remote control to
switch to the following interface:
Use the cursor buttons ( ) to
select a item on the screen you wish to
play, then press the button to
confirm your selection.
Press the button to switch
between AUDIO( ), JPEG( ) and
MOVIE( ) mode
Pressthe ( )buttontoreturntothe
main menu.
TITLE
DISP
ENTER
TITLE
.
STOP
▲/▼/◄/►
Data Disc Play Operations
8:25
VOL 33
MP3
1/23 00:04:14
DANZA
NTIC SATR
File Type
Status
Artist & Song Title
( MP3 only)
Clock Volume level
PLAY
Playing time
Track number
[MP3] DANZA.MP3
Information display
Folders list
Files list
Files type
Playback type icons:
AUDIO Playback mode (default)
JPG Playback mode (default)
MOVIE Playback mode (default)

Using the USB stick:
MODE
Note:
This disc player features a front panel
USB interface. A USB device can be
connected to this port. When you insert a
USB stick through the port, the DVD
player will search for the MP3/WMA files
and start to play them automatically.
If you insert a SD/MMC card into the
SD/MMC card slot or a disc into the disc
slot while reading the USB stick, the unit
will play the disc. You can press
button to switch to USB playback mode.
- Use the USB adaptor cable, if
necessary.
- The operations of playing MP3/WMA
files in the USB is the same as the
MP3/WMA operation described in the
CD/MP3/WMA
disc operations.
- When reading the USB stick, please
don't touch or remove it.
- If following the instruction above, the
unit can't read the file in the USB stick,
please check if the device is in good
condition,
or take it out then insert it into the USB
port once more.
- The main unit can only support the
standard USB-memory device.
- USB MP3 player is not a standard which
means different brand name or different
models have their own standard. So this
product cannot support all MP3 players.
- When connecting an MP3 player and
there is a normal battery in the player
(non rechargeable battery), you should
remove
the battery from the MP3 player and then
connect it to the USB port. Otherwise, it
may cause battery burst.
- When reading a USB device, be sure
not to remove it from the USB port
(change mode beforehand).
USB Operations
Using the SD/MMC card:
MODE
Note:
MODE
This disc player features a SD/MMC
memory card slot. When you insert a
SD/MMC card into the memory card slot,
the DVD player will read the SD/MMC
card automatically.
If you insert a USB stick into the USB port
or a disc into the disc slot while reading
the SD/MMC card, the unit will play the
file in the USB or track on the disc. When
you press the button to switch
back to SD/MMC reading mode.
The operations of the SD/MMC memory
card playback is the same with the CD /
MP3 / WMA disc operations described
above.
- When reading the memory card, please
don't touch or take out the card.
- If following the instruction above, the
unit can't read the card, please check if
the card is in good condition, or take out
the card and then insert it into the card
slot once more.
This car DVD player is equipped with an
Audio / Video Auxiliary input jack on the
front panel, so you can connect a video
game, digital camera/camcorder or other
device you wish to use in this car DVD
payer.
To connect a video device to the auxiliary
A/V input jack, first connect it with the
cable provided, Then press the
button to turn AV IN mode ON or OFF.
AV In Operations
SD/MMC Memory Card Operations