Cambo RPS-SYSTEM User manual

RPS-SYSTEM
Motorized reproduction column
INSTRUCTION MANUAL
EN
Please read this manual carefully before using the RPS-SYSTEM

1
Thank you for purchasing a Cambo product.
Cambo's motorized Column for Reproduction Photography, RPS-System, is a user friendly system that can
be configured from different elements to ensure the best possible solution for any reproduction photography
situation. The vertical movement is self-locking, motorized and remote controlled by a control unit which also
controls the speed an direction of the column. The fine geared adjustable camera arm offers great control
over the horizontal displacement of the camera.
The sturdy aluminium column, optional wall mounting or solid steel base, ensure a stable system for any studio
environment. The self-locking vertical mechanism and automatic end-stops provide a safe working
environment for photographer as well as fragile objects.

2
Index
1Warnings.....................................................................................3
2Key features................................................................................4
3RPS-System overview................................................................5
4Setting up the RPS-System........................................................6
4.1Unpacking the base ....................................................................6
4.2Levelling the base.......................................................................7
4.3Applying the column to the base.................................................7
4.4Levelling the column ...................................................................8
4.5Applying the board to the base...................................................9
4.5.1 Applying the baseboard with extenders..................... 9
4.5.2 Applying the baseboard without extenders................ 9
4.6Wall mount installation..............................................................10
5Connecting the RPS-System....................................................11
5.1Interface and connections.........................................................11
5.1.1 Column interface...................................................... 11
5.1.2 Remote control interface.......................................... 12
5.1.3 Control box interface................................................ 12
5.2RPS-connection scheme ..........................................................13

3
1 Warnings
The motorized column features two height adjustable end-stops. When the cross-arm passes one of
these end-stops the drive immediately stops. When positioned correctly these end-stops prevent
collisions between the cross-arm or camera and the baseboard, floor, ceiling or object on the
baseboard.
Before use make sure the cross-arm is positioned between the end-stops.
Before use make sure the end-stops are positioned at the correct height.
oPlace the top end stop at a height that the cross-arm or mounted camera will not be able to
hit the ceiling or any objects hanging from the ceiling before reaching the end-stop first.
oPlace the bottom end-stop well above the floor, baseboard, or objects on the floor or
baseboard. So the cross-arm will reach the end-stop before the mounted camera will collide
with any objects below.
Ensure the cables are guided properly at the back of the column.
Never disconnect the remote from the cable supply during use. This may cause damages to the
electronic components!
Never disconnect the motor unit from the power supply during use. This may cause damages to the
electronics.
The maximum weight that can be applied to the cross-arm at maximum extend is 5KG.

4
2 Key features
•Motorized vertical adjustment
•Fine geared horizontal adjustable camera arm
•Adjustable motor speed
•Automatic end stops
•Self-locking vertical position
•Reinforced aluminium column
•Wall mounting options
•Optional base

5
3 RPS-System overview
A. RPS-200 Repro column 2mtr
B. RPS-175 Cross arm extension
C. RPS-180 Levelling unit pro
D. RPS-160 Board Basic RPS
E. RPS-222 Kit Height adjusters
F. RPS-Base
G. RPS-170 Wall mount Kit
H. RPS-201 Smart controller
I. RPS-Remote controller
J. RPS-Control box
Figure 1 RPS-System overview

6
4 Setting up the RPS-System
4.1 Unpacking the base
CAUTION, when removing or placing the baseboard from or to the base
It’s advised to perform the following instructions with two persons. Please remove or insert the baseboard
uniformly distributed and parallel to the base to prevent jamming.
Figure 2 Unpacking the Base Board

7
4.2 Levelling the base
Figure 3 Leveling the Base
To correctly level the RP1-Base you will have to use a spirit level [A]. The base features four adjustable feet
[B]. To level the base, loosen locking ring [D] then use a spanner (metric 14mm) to adjust the height of the feet
by turning nut [C]. When the base is leveled make sure to retighten locking ring [D].
4.3 Applying the column to the base
The column must be fixed to the base by using four M8x110 countersunk bolts [A] (Hexagon socket Allen key
5mm) and four M8 nuts [C] (Metric spanner 13mm). It is advised to set up the column with two persons. Place
the column on the base and insert bolts [A], place the washers and nuts on the bolts from the bottom. Do not
fully tighten the bolts and nuts before all four are placed. When all four bolts are in place, tighten the bolts and
nuts firmly using the 5mm Allen key and 13mm spanner.

8
Figure 4 Mounting the column to the base
4.4 Levelling the column
Use a spirit level [detail D]l to check if the column is leveled. Make sure the base is correctly leveled first.
Please only perform this operation when necessary. If the column is slightly off, the four set screws [D] near
the bolts [A] can be used to fine adjust the level of the column. To level the column slightly loosen bolts [A]
and screw the appropriate setscrew [D] using the 5mm Allen key. When the column is leveled, retighten bolts
[A] firmly.

9
4.5 Applying the board to the base
It is advised to perform the baseboard placement with two persons.
4.5.1 Applying the baseboard with extenders
Before applying the extenders to the base, make sure all the setscrews [D] and [E] are fully loosened. Place
the four extenders [C] in the base couplers [B]. Do not tighten the base coupler set screws yet! Insert the
baseboard pins in the extenders, make sure to let the baseboard pins sink in uniformly. Now first tighten the
extender locking set screws [4x]. Finally lock the extenders to the base by tightening the base coupler set
screws.
Figure 5 Applying the baseboard on extenders
After the baseboard is fixed you can apply the motor case [H] by using the two supplied M3x4 cylinder head
bolts [I] using a 2mm Allen key. Finally the remote holder [F] (which is mounted to the baseboard inversely)
can be mounted to the baseboard by using locking knobs [G]
4.5.2 Applying the baseboard without extenders
Before applying the baseboard to the base, make sure locking screws [E] inside base couplers [B] are fully
loosened. Apply the baseboard to the base by uniformly sinking the baseboard pins in the base couplers. Make
sure to retighten the locking set screws [E 4x] after the placement.
Figure 6 Applying the baseboard to the base

10
4.6 Wall mount installation
Besides mounting the column to the base it is optional to order brackets for a wall mounted system. When
installing the wall mounted system start by applying the top bracket [A] to the wall. Make sure the distance
between the floor and the bottom mounting hole is at least 225CM. Fix the top bracket to the wall first with a
minimum of one screw on each side. Use a sprit level during mounting to make sure the bracket is fixed to the
wall leveled. Now fix the bottom bracket to the bottom of the column by using the two bolts [D] and washers
[C]. Place the bolts in the designated holes of the bottom mounting block of the column. Fix the column to the
wall mounted to bracket. Level the brackets and column by using a spirit level and fix the bottom bracket to
the wall with at least one screw on each side. For fine tuning the position of the column both the top and bottom
bracket contain a set screw [E]. Before using the set screws, slightly loosen bolts [D] then tighten or loosen
set screws [E]. when the column is leveled, retighten bolts [D].
Figure 7 RPS-System wall mount

11
5 Connecting the RPS-System
Please ensure to read the safety warnings [Chapter 1] carefully before connecting and operating the RPS-
system.
5.1 Interface and connections
5.1.1 Column interface
a. Cross-arm
b. Cross-arm drive knob
c. Cross-arm locking knob
d. Arca compatible Quick release
e. Quick release locking knob
f. Top end-stop
g. Top end-stop locking knobs
h. Bottom end-stop
i. Bottom end-stop locking knobs
j. Cable track
Figure 8 RPS-Column Features

12
5.1.2 Remote control interface
a. Pushbutton UP
b. Pushbutton DOWN
c. Low/High mode indication light
d. Low/High mode pushbutton switch
e. Speed control potentiometer
f. Remote control cable socket
g. Magnetic back
h. Weight compensation potentiometer*
Figure 9 Remote control
Because of the weight of the camera, the downward speed will be higher than the upward speed. This
speed difference can be controlled on the rear of the remote control. By using a small screw driver
you can control the weight compensation potentiometer through hole [H].
5.1.3 Control box interface
a. On/Off switch
b. AC power cable socket
c. USB Type C laptop connection socket
d. Touch controller socket
e. Remote control socket
f. Column connection socket
Figure 10 RPS-control box

13
5.2 RPS-connection scheme
Figure 11 RPS-Connection scheme
WARNING!: Before connecting the AC cable, please determine if the input power specified on the
power supply corresponds with the AC power used in your area
WARNING!: Never unplug any of the connectors when the unit is in use, this may damage the
electronics.

Cambo Fotografische Industrie B.V.
Cambo R&D July 2022
This instruction manual is prepared with care, although no responsibility, financial or otherwise, is accepted for any consequences related the information
stated in this instruction manual. All specifications in this instruction manual are subject to change without notice.
For more information please visit the Cambo web site: www.cambo.com