Cambro Camshelving User manual

IMPORTANT! DO NOT REMOVE
elastic bands on rail panels
until after bottom post
connector frame is installed.
STOP!
ASSEMBLY
MANUAL
Camshelving®
GN Food Pan Trolley
SCAN HERE to watch short
assembly video.
from the world of Comcater!
National Head Oce
156 Swann Drive
Derrimut VIC 3026
Tel: [phone]
Fax: [phone]
www.comcater.com.au
Melbourne
96-100 Tope Street
South Melbourne VIC 3205
Tel: [phone]
Fax: [phone]
Sydney
20/4 Avenue of the Americas
Newington, NSW 2127
Tel: [phone]
Fax: [phone]
Perth
Unit 16, 7 Abrams Street
Balcatta, WA 6021
Tel: [phone]
Fax: [phone]
Brisbane
46-60 Dunhill Crescent,
Morningside, QLD 4170
Tel: [phone]

REV. DESCRIPTION DATE APPROVED
.005 .010
1/4 .015
DO NOT SCALE DRAWING!
DWG. SIZE
1:1
A
DRAWN
BY
MANUFACTURING COMPANY
FILE NAME:
REV.
TOLERANCES
ISSUED
SCALE
TITLE
SHEET 1 OF 1
CHECKED
APPROVED
MATERIAL
FINISH
APPROX. WEIGHT
ALL DIMENSIONS ARE IN INCHES.
E. Freeman
UPRCWEDGE B 9-17-19 Part2
DRAWING No.
6/9/2020
PRINTED VERSIONS OF THIS DOCUMENT ARE NOT CONTROLLED
Camshelving®
GN Food Pan Trolley
Parts and Tools
SCAN HERE
to watch short assembly video.
IMPORTANT! DO NOT REMOVE
elastic bands on rail panels until after
bottom post connector frame is installed.
Post x (4)
Factory installed
Bottom Wedges and Casters
Half Size
Full Size
REV. DESCRIPTION DATE APPROVED
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
E
F
E
F
E
Single food pan adding final view Assem11
REV
.015
.031
1/4 .063
DO NOT SCALE DRAWING!
DWG. SIZE
1:8
E
Single food pan adding nal view Assem11
DRAWN
BY
DRAWING No.
MANUFACTURING COMPANY
FILE NAME
REV.
TOLERANCES
ISSUED
SCALE
TITLE
SHEET 1 OF 1
CHECKED
APPROVED
MATERIAL
FINISH
APPROX. WEIGHT
ALL DIMENSIONS ARE IN INCHES.
5/15/2020
E. Freeman
PRINTED COPIES OF THIS DOCUMENT ARE NOT CONTROLLED
REV. DESCRIPTION DATE APPROVED
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
E
F
E
F
E
Cart Half size Food Pan Rack EXP 2 Assem2
REV
.015
.031
1/4.063
DO NOT SCALE DRAWING!
DWG.SIZE
1:8
E
Cart Half size Food Pan Rack EXP 2 Assem2
DRAWN
BY
DRAWINGNo.
MANUFACTURINGCOMPANY
FILENAME
REV.
TOLERANCES
ISSUED
SCALE
TITLE
SHEET1 OF 1
CHECKED
APPROVED
MATERIAL
FINISH
APPROX.WEIGHT
ALLDIMENSIONS ARE IN INCHES.
4/28/2020
E.Freeman
PRINTEDCOPIES OF THIS DOCUMENT ARE NOT CONTROLLED
REV. DESCRIPTION DATE APPROVED
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
E
F
E
F
E
Post, Casters and Wedge Assem9
REV
.015
.031
1/4 .063
DO NOT SCALE DRAWING!
DWG. SIZE
1:4
E
Post, Casters and Wedge Assem9
DRAWN
BY
DRAWING No.
MANUFACTURING COMPANY
FILE NAME
REV.
TOLERANCES
ISSUED
SCALE
TITLE
SHEET 1 OF 1
CHECKED
APPROVED
MATERIAL
FINISH
APPROX. WEIGHT
ALL DIMENSIONS ARE IN INCHES.
5/26/2020
E. Freeman
PRINTED COPIES OF THIS DOCUMENT ARE NOT CONTROLLED
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
E
F
E
F
E
--
REV
--
0.015
0.031
1/4
0.063
DO NOT SCALE DRAWING!
DWG.SIZE
-
-
1:2
E
TOP frame Part2
DRAWN
BY
DRAWINGNo.
MANUFACTURINGCOMPANY
FILENAME
REV.
TOLERANCES:
ISSUED
SCALE
TITLE
SHEET1 OF 1
CHECKED
APPROVED
MATERIAL
FINISH
APPROX.WEIGHT
ALLDIMENSIONS ARE IN INCHES.
REV.
APPR'D
DATE
DESCRIPTION
5/15/2020
Top Post
Connector Frame x (1)
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
E
F
E
F
E
--
REV
--
0.015
0.031
1/4
0.063
DO NOT SCALE DRAWING!
DWG.SIZE
-
-
1:2
E
Bottom frame Part2
DRAWN
BY
DRAWINGNo.
MANUFACTURINGCOMPANY
FILENAME
REV.
TOLERANCES:
ISSUED
SCALE
TITLE
SHEET1 OF 1
CHECKED
APPROVED
MATERIAL
FINISH
APPROX.WEIGHT
ALLDIMENSIONS ARE IN INCHES.
REV.
APPR'D
DATE
DESCRIPTION
5/15/2020
Bottom Post
Connector Frame x (1) Half Size – Rail Panels x (6)
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
E
F
E
F
E
--
REV
--
0.015
0.031
1/4
0.063
DO NOT SCALE DRAWING!
DWG.SIZE
-
-
1:5
E
Rail Assem10
DRAWN
BY
DRAWINGNo.
MANUFACTURINGCOMPANY
FILENAME
REV.
TOLERANCES:
ISSUED
SCALE
TITLE
SHEET 1 OF 1
CHECKED
APPROVED
MATERIAL
FINISH
APPROX.WEIGHT
ALL DIMENSIONS ARE IN INCHES.
REV.
APPR'D
DATE
DESCRIPTION
5/15/2020
Wedges x (8)
Bx (4)Ax (4)
Full Size – Rail Panels x (12)
REV. DESCRIPTION DATE APPROVED
.005 .010
1/4 .015
DO NOT SCALE DRAWING!
DWG. SIZE
1:1
A
DRAWN
BY
MANUFACTURING COMPANY
FILE NAME:
REV.
TOLERANCES
ISSUED
SCALE
TITLE
SHEET 1 OF 1
CHECKED
APPROVED
MATERIAL
FINISH
APPROX. WEIGHT
ALL DIMENSIONS ARE IN INCHES.
E. Freeman
UPRCWEDGE A 9-17-19 Part2
DRAWING No.
6/9/2020
PRINTED VERSIONS OF THIS DOCUMENT ARE NOT CONTROLLED
2 Person
Assembly
Use Rubber Mallet
for Assembly
COMPONENT
from the world of Comcater!
National Head Oce
156 Swann Drive
Derrimut VIC 3026
Tel: [phone]
Fax: [phone]
www.comcater.com.au
Melbourne
96-100 Tope Street
South Melbourne VIC 3205
Tel: [phone]
Fax: [phone]
Sydney
20/4 Avenue of the Americas
Newington, NSW 2127
Tel: [phone]
Fax: [phone]
Perth
Unit 16, 7 Abrams Street
Balcatta, WA 6021
Tel: [phone]
Fax: [phone]
Brisbane
46-60 Dunhill Crescent,
Morningside, QLD 4170
Tel: [phone]

REV.
DESCRIPTION
DATE
APPROVED
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
E
F
E
F
E
Single food pan adding post with casters and wedges Assem11
REV
.015
.031
1/4
.063
DO NOT SCALE DRAWING!
DWG. SIZE
1:8
E
Single food pan adding post with casters and wedges Assem11
DRAWN BY
DRAWING No.
MANUFACTURING COMPANY
FILE NAME
REV.
TOLERANCES
ISSUED
SCALE
TITLE
SHEET 1 OF 1
CHECKED
APPROVED
MATERIAL
FINISH
APPROX. WEIGHT
ALL DIMENSIONS ARE IN INCHES.
5/15/2020
E. Freeman
PRINTED COPIES OF THIS DOCUMENT ARE NOT CONTROLLED
REV.
DESCRIPTION
DATE
APPROVED
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
E
F
E
F
E
Single food pan adding post with casters and wedges Assem11
REV
.015
.031
1/4
.063
DO NOT SCALE DRAWING!
DWG. SIZE
1:8
E
Single food pan adding post with casters and wedges Assem11
DRAWN BY
DRAWING No.
MANUFACTURING COMPANY
FILE NAME
REV.
TOLERANCES
ISSUED
SCALE
TITLE
SHEET 1 OF 1
CHECKED
APPROVED
MATERIAL
FINISH
APPROX. WEIGHT
ALL DIMENSIONS ARE IN INCHES.
5/15/2020
E. Freeman
PRINTED COPIES OF THIS DOCUMENT ARE NOT CONTROLLED
REV. DESCRIPTION DATE APPROVED
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
E
F
E
F
E
Single food pan showing post installed Assem11
REV
.015
.031
1/4 .063
DO NOT SCALE DRAWING!
DWG. SIZE
1:8
E
Single food pan showing post installed Assem11
DRAWN
BY
DRAWING No.
MANUFACTURING COMPANY
FILE NAME
REV.
TOLERANCES
ISSUED
SCALE
TITLE
SHEET 1 OF 1
CHECKED
APPROVED
MATERIAL
FINISH
APPROX. WEIGHT
ALL DIMENSIONS ARE IN INCHES.
5/15/2020
E. Freeman
PRINTED COPIES OF THIS DOCUMENT ARE NOT CONTROLLED
Step 1: Install Bottom Post Connector Frame
1
2
3
Match lock tab on post wedge
(B close up) to lock opening
(A close up) on frame.
Slide each post up through
bottom post connector opening.
Move frame down evenly
onto wedges (C close up).
Stand trolley upright on casters.
Mallet frame down on
4 corners (D close up).
Top of frame should be ush to
top of wedges (D close up).
1
2
3
4
5
6
REV. DESCRIPTION DATE APPROVED
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
E
F
E
F
E
Single food pan showing post installed Assem11
REV
.015
.031
1/4 .063
DO NOT SCALE DRAWING!
DWG. SIZE
1:8
E
Single food pan showing post installed Assem11
DRAWN
BY
DRAWING No.
MANUFACTURING COMPANY
FILE NAME
REV.
TOLERANCES
ISSUED
SCALE
TITLE
SHEET 1 OF 1
CHECKED
APPROVED
MATERIAL
FINISH
APPROX. WEIGHT
ALL DIMENSIONS ARE IN INCHES.
5/15/2020
E. Freeman
PRINTED COPIES OF THIS DOCUMENT ARE NOT CONTROLLED
A
B
REV.
DESCRIPTION
DATE
APPROVED
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
E
F
E
F
E
Single food pan adding post with casters and wedges Assem11
REV
.015
.031
1/4
.063
DO NOT SCALE DRAWING!
DWG.SIZE
1:8
E
Single food pan adding post with casters and wedges Assem11
DRAWN BY
DRAWINGNo.
MANUFACTURINGCOMPANY
FILENAME
REV.
TOLERANCES
ISSUED
SCALE
TITLE
SHEET 1 OF 1
CHECKED
APPROVED
MATERIAL
FINISH
APPROX.WEIGHT
ALL DIMENSIONS ARE IN INCHES.
5/15/2020
E.Freeman
PRINTED COPIES OF THIS DOCUMENT ARE NOT CONTROLLED
6
3
4
1
C
5
D
from the world of Comcater!
National Head Oce
156 Swann Drive
Derrimut VIC 3026
Tel: [phone]
Fax: [phone]
www.comcater.com.au
Melbourne
96-100 Tope Street
South Melbourne VIC 3205
Tel: [phone]
Fax: [phone]
Sydney
20/4 Avenue of the Americas
Newington, NSW 2127
Tel: [phone]
Fax: [phone]
Perth
Unit 16, 7 Abrams Street
Balcatta, WA 6021
Tel: [phone]
Fax: [phone]
Brisbane
46-60 Dunhill Crescent,
Morningside, QLD 4170
Tel: [phone]

Step 2: Install Side Rail Panels
Identify top and bottom of
rail panel (A close up).
Hold each side/end and carefully
remove elastic band.
Hold panel with rails facing
into the inside of the trolley
(B close up). Slide down into
grooves on posts.
Slide down slowly, 2 or 3 per side
to hold frame together, alternating
until complete.
1
2
3
4
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
E
F
E
F
E
--
REV
--
0.015
0.031
1/4
0.063
DO NOT SCALE DRAWING!
DWG.SIZE
-
-
1:5
E
Rail Assem10
DRAWN
BY
DRAWING No.
MANUFACTURING COMPANY
FILE NAME
REV.
TOLERANCES:
ISSUED
SCALE
TITLE
SHEET 1 OF 1
CHECKED
APPROVED
MATERIAL
FINISH
APPROX.WEIGHT
ALL DIMENSIONS ARE IN INCHES.
REV.
APPR'D
DATE
DESCRIPTION
5/15/2020
A
TOP
BOTTOM
1
B
REV. DESCRIPTION DATE APPROVED
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
E
F
E
F
E
Single food pan showing instaling rail exp Assem11
REV
.015
.031
1/4 .063
DO NOT SCALE DRAWING!
DWG. SIZE
1:8
E
Single food pan showing instaling rail exp Assem11
DRAWN
BY
DRAWING No.
MANUFACTURING COMPANY
FILE NAME
REV.
TOLERANCES
ISSUED
SCALE
TITLE
SHEET 1 OF 1
CHECKED
APPROVED
MATERIAL
FINISH
APPROX. WEIGHT
ALL DIMENSIONS ARE IN INCHES.
5/15/2020
E. Freeman
PRINTED COPIES OF THIS DOCUMENT ARE NOT CONTROLLED
3
REV. DESCRIPTION DATE APPROVED
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
E
F
E
F
E
Single food pan showing instaling rail exp Assem11
REV
.015
.031
1/4 .063
DO NOT SCALE DRAWING!
DWG. SIZE
1:8
E
Single food pan showing instaling rail exp Assem11
DRAWN
BY
DRAWING No.
MANUFACTURING COMPANY
FILE NAME
REV.
TOLERANCES
ISSUED
SCALE
TITLE
SHEET 1 OF 1
CHECKED
APPROVED
MATERIAL
FINISH
APPROX. WEIGHT
ALL DIMENSIONS ARE IN INCHES.
5/15/2020
E. Freeman
PRINTED COPIES OF THIS DOCUMENT ARE NOT CONTROLLED
4
REV. DESCRIPTION DATE APPROVED
D
C
B
A
A
B
C
D
1 2 3
4 5
6
7
8
8
7
6
5
4
3
2
1
E
F
E
F
.015 .031
1/4 .063
DO NOT SCALE DRAWING!
DWG. SIZE
1:12
C
Showing panels installed correctly Assem2
DRAWN
BY
DRAWING No.
MANUFACTURING COMPANY
FILE NAME:
REV.
TOLERANCES
ISSUED
SCALE
TITLE
SHEET 1 OF 1
CHECKED
APPROVED
MATERIAL
FINISH
APPROX. WEIGHT
ALL DIMENSIONS ARE IN INCHES.
6/11/2020
E. Freeman
PRINTED COPIES OF THIS DOCUMENT ARE NOT CONTROLLED
REV. DESCRIPTION DATE APPROVED
D
C
B
A
A
B
C
D
1 2 3
4 5
6
7
8
8
7
6
5
4
3
2
1
E
F
E
F
.015 .031
1/4 .063
DO NOT SCALE DRAWING!
DWG. SIZE
1:12
C
Showing panels installed incorrectly Assem2
DRAWN
BY
DRAWING No.
MANUFACTURING COMPANY
FILE NAME:
REV.
TOLERANCES
ISSUED
SCALE
TITLE
SHEET 1 OF 1
CHECKED
APPROVED
MATERIAL
FINISH
APPROX. WEIGHT
ALL DIMENSIONS ARE IN INCHES.
6/11/2020
E. Freeman
PRINTED COPIES OF THIS DOCUMENT ARE NOT CONTROLLED
CORRECT INSTALLATION
INCORRECT INSTALLATION
from the world of Comcater!
National Head Oce
156 Swann Drive
Derrimut VIC 3026
Tel: [phone]
Fax: [phone]
www.comcater.com.au
Melbourne
96-100 Tope Street
South Melbourne VIC 3205
Tel: [phone]
Fax: [phone]
Sydney
20/4 Avenue of the Americas
Newington, NSW 2127
Tel: [phone]
Fax: [phone]
Perth
Unit 16, 7 Abrams Street
Balcatta, WA 6021
Tel: [phone]
Fax: [phone]
Brisbane
46-60 Dunhill Crescent,
Morningside, QLD 4170
Tel: [phone]

Step 3: Install Top Post Connector Frame
Install wedges as shown (A close up).
Place Top Post Connector Frame
down onto wedges.
Mallet frame down onto each corner
(B close up).
Frame lock opening should be fully
engaged on wedge lock tab.
1
2
3
4
REV. DESCRIPTION DATE APPROVED
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
E
F
E
F
E
Single food pan adding wedges exp Assem11
REV
.015
.031
1/4 .063
DO NOT SCALE DRAWING!
DWG. SIZE
1:8
E
Single food pan adding wedges exp Assem11
DRAWN
BY
DRAWING No.
MANUFACTURING COMPANY
FILE NAME
REV.
TOLERANCES
ISSUED
SCALE
TITLE
SHEET 1 OF 1
CHECKED
APPROVED
MATERIAL
FINISH
APPROX. WEIGHT
ALL DIMENSIONS ARE IN INCHES.
5/15/2020
E. Freeman
PRINTED COPIES OF THIS DOCUMENT ARE NOT CONTROLLED
REV. DESCRIPTION DATE APPROVED
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
E
F
E
F
E
Single food pan adding final view Assem11
REV
.015
.031
1/4 .063
DO NOT SCALE DRAWING!
DWG. SIZE
1:8
E
Single food pan adding nal view Assem11
DRAWN
BY
DRAWING No.
MANUFACTURING COMPANY
FILE NAME
REV.
TOLERANCES
ISSUED
SCALE
TITLE
SHEET 1 OF 1
CHECKED
APPROVED
MATERIAL
FINISH
APPROX. WEIGHT
ALL DIMENSIONS ARE IN INCHES.
5/15/2020
E. Freeman
PRINTED COPIES OF THIS DOCUMENT ARE NOT CONTROLLED
A
REV. DESCRIPTION DATE APPROVED
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
E
F
E
F
E
Single food pan adding top frame exp Assem11
REV
.015
.031
1/4 .063
DO NOT SCALE DRAWING!
DWG. SIZE
1:8
E
Single food pan adding top frame exp Assem11
DRAWN
BY
DRAWING No.
MANUFACTURING COMPANY
FILE NAME
REV.
TOLERANCES
ISSUED
SCALE
TITLE
SHEET 1 OF 1
CHECKED
APPROVED
MATERIAL
FINISH
APPROX. WEIGHT
ALL DIMENSIONS ARE IN INCHES.
5/15/2020
E. Freeman
PRINTED COPIES OF THIS DOCUMENT ARE NOT CONTROLLED
1
2
B
A
B
from the world of Comcater!
National Head Oce
156 Swann Drive
Derrimut VIC 3026
Tel: [phone]
Fax: [phone]
www.comcater.com.au
Melbourne
96-100 Tope Street
South Melbourne VIC 3205
Tel: [phone]
Fax: [phone]
Sydney
20/4 Avenue of the Americas
Newington, NSW 2127
Tel: [phone]
Fax: [phone]
Perth
Unit 16, 7 Abrams Street
Balcatta, WA 6021
Tel: [phone]
Fax: [phone]
Brisbane
46-60 Dunhill Crescent,
Morningside, QLD 4170
Tel: [phone]

Care and Maintenance
• Clean rack and cover with hot water, mild detergent and soft cloth or sponge. Racks may also be pressure washed.
Use cleaners and degreasers designated for plastic materials.
• DO NOT use cleaners or detergents containing ammonia or bleach.
• DO NOT use steel wool, abrasive scrub pads or brushes.
• Wipe off any remaining soap and dirt with a clean cloth. Allow to air dry or use a clean cloth to wipe dry.
Warranty
• GN Food Pan Trolley has a warranty against manufacturing defects for one year from date of shipment
and a lifetime limited warranty against rust and corrosion.
• The warranty is in effect provided that the product has not been altered in any way and assuming
normal and proper use and maintenance. Abuse or misuse will void the warranty.
Caution!
• Do not use with or place near an open flame or against hot surfaces above 177˚C.
• Not intended for use in blast chiller.
Customer Service
from the world of Comcater!
National Head Oce
156 Swann Drive
Derrimut VIC 3026
Tel: [phone]
Fax: [phone]
www.comcater.com.au
Melbourne
96-100 Tope Street
South Melbourne VIC 3205
Tel: [phone]
Fax: [phone]
Sydney
20/4 Avenue of the Americas
Newington, NSW 2127
Tel: [phone]
Fax: [phone]
Perth
Unit 16, 7 Abrams Street
Balcatta, WA 6021
Tel: [phone]
Fax: [phone]
Brisbane
46-60 Dunhill Crescent,
Morningside, QLD 4170
Tel: [phone]
Phone: [phone]
Fax: [phone]
Email: [email protected]