Cambro CVC75 User manual

This owner’s manual applies to all variations of
the following Vending Cart Models:
CVC75
Vending Cart with 12" Safety Barrier
CVC75B
Base Unit
Congratulations on the purchase of your
new Vending Cart. This Owner’s Manual
provides you with a step by step guide to
assembling and maintaining a Vending Cart.
If you have any further questions, please do
not hesitate to contact us, visit our website
at www.cambro.com or call our Customer
Service Dept. [phone].
OWNER’S
MANUAL
CVC75B
CVC75
VENDING CARTS
www.cambro.com

2
C VC 75 DC12 C VC 75 DC E12
CVC75DC6 CVC75DCE6
I. Extender Installation / Side Shelves
II. End Table CVC75LET and CVC75RET Installation
IV. Optional Tow Hitch
III. Base Shelves CVC75LSRL Installation

3
H23011: Wrap Green Custom Print CVC75 10.
H23012: Wrap Healthy Choices Print CVC75 11.
H23013: Wrap Red Custom Print CVC75 12.
A
H23001
H21044 H21045
H22003
S22006
CVC75LSRL110
H23014
S23004
S23005
S23006
CVC75RET110
CVC75LET110
DETAIL A
SCALE 1 : 1
S23001
S23002
S23003
Replacement Wrap Numbers CVC75 (above):
Each wrap comes with one squeegee (47900).
V. Part List
VI. Assembly
H23011: Wrap Green Custom Print CVC75 10.
H23012: Wrap Healthy Choices Print CVC75 11.
H23013: Wrap Red Custom Print CVC75 12.
A
H23001
H21044 H21045
H22003
S22006
CVC75LSRL110
H23014
S23004
S23005
S23006
CVC75RET110
CVC75LET110
DETAIL A
SCALE 1 : 1
S23001
S23002
S23003
Replacement Wrap Numbers CVC75 (above):
Each wrap comes with one squeegee (47900).
Detail A
CODE DESCRIPTION QTY.
CVC75LSRL110 Roto-Molded Lower Shelfs Packaged Seperately with Pawl, Shoulder Screw and Tool (not shown) 2
S23004 Roto-Molded Main Shelf 1
CVC75LET110 Left End Table 1
CVC75RET110 Right End Table 1
H22010 12" Front Window 1
H22011 6" Side Window 1
H23001 Lower Shelf Pawl Kit 2
H21044 CSTR 6 x 2 Flt Trd SWB Prem 5
H22003 6061-T6 Aluminum Anodized Black with 10-32 X 1.0" Threaded Holes at Each End 2
S23005 CVC75 12" Front Window 2
S23006 12.55" X 12" Side Window 2
H23014 CVC75 .25" 304 SS rod x 15.5" threaded x 1.5" at each end 4
H21045 Caster Swivel Lock for Large Pattern Mounts 2
S23001 Plastic Snap-in Panel Plug, Black 12
S23002 Tapered Test Plug, Rubber 1
S23003 Plastic Panel Plug, Black 4
S22006 PVC Drain Assembly Installed Before Foaming 2
CODE WRAP DESIGNS 1
H23002 Wrap Blue Print CVC75 1
H23003 Wrap Carbon Fiber Print CVC75 1
H23004 Wrap Fruit and Vegetable Print CVC75 1
H23005 Wrap Green Print CVC75 1
H23006 Wrap Red Print CVC75 1
H23007 Wrap Black Custom Print CVC75 1
H23008 Wrap Blue Custom Print CVC75 1
H23009 Wrap Custom Print CVC75 1
H23010 Wrap Fruit and Vegetable Custom CVC75 1
H23011 Wrap Green Custom Print CVC75 1
H23012 Wrap Healthy Choices Print CVC75 1
H23013 Wrap Red Custom Print CVC75 1

Fig. 6 Fig. 7
XI. Replacement Parts
XII. Warranty
Please visit www.cambro.com for a complete list of replacement parts. The model number
of the Cambro Vending Cart is required to determine the correct replacement part.
Cambro warrants to the original buyer that if a product proves defective:
1. Within 1 year from the date of manufacture, Cambro will replace the product free of charge; or,
2. After 1 year and up to 2 years from the date of manufacture, Cambro will grant a credit of 2/3 off replacement product; or,
3. After 2 years and up to 3 years from the date of manufacture, Cambro will grant a credit of 1/3 of the original price towards a replacement product.
TO ORDER REPLACEMENT PARTS:
• Call Cambro Customer Service at 800 833 3003 or
• Call International 714 848 1555
• Fax your order to 714 842 3430 or
• Call your local Cambro Representative or Distributor
Customer Service 800 833 3003
© Cambro Manufacturing Company, Huntington Beach, California 92647
Printed in USA 06/23
UMCVC75
REV B
D052307
X. Maintenance and Cleaning
The Cambro Vending Cart should be cleaned regularly.
Additionally, it should be cleaned before using if it has been idle for 5 days or more.
Vending Cart Body/Display Case/Extender/Compartments
Steam clean or wash with warm soapy water and a soft plastic or bristle brush. NEVER use a metal brush or abrasive cleaner.
Scrub with brush, and rinse thoroughly with clean water. If staining occurs, any standard de-stainer such as Ecolab’s “Dip It” should be used.
Clear Plastic Sneeze Guard Shield
Wash the clear plastic shield with warm soapy water. Rinse thoroughly. Dry with soft cloth or soft paper towel.
NEVER use alcohol, i.e. Windex, abrasives, any type of solvent or acetone
Alcohol based cleaners will cause the shield to crack.
CASTERS
Caster maintenance should be performed after every cleaning.
1. Grease swivel raceway of caster using a lubricant such as
Lubriplate #930-AA, Keystone #84EPXLT multi-purpose
grease or equivalent. Apply grease using a grease gun with
a needle nose adapter or a tube-type applicator such as
Sta-lube Moly-graph Assembly Lube (Fig.6). These can be
obtained at most auto parts stores.
2. Use a light oil such as WD-40 on the hub (Fig.7). Check
caster for damage and test caster spin and swivel rotation
before returning to service.
COMPLEMENTARY ACCESSORIES
CODE DESCRIPTION
OVERALL DIMENSIONS
L x W x H
UPC300 Ultra pan carrier 17" x 253⁄4" x 223⁄8"
EPP300 Cam GoBox®front loader 25.2" x 17.3" x 18.7"
EPP140 Cam GoBox top loader 23.6" x 15.7" x 8.5"
EPP160 Cam GoBox top loader 23.6" x 15.7" x 10"
EPPFLID Flip lid for Cam GoBoxes 23.6" x 15.7" x 1.6"
CB1220 Cutting Board 21" x 131⁄8" x 1⁄2"
CPB1220 Buffet Camchiller®181⁄2" x 125⁄8" x 4"
DIV12 12" Divider Bar 123⁄4" L
DIV20 20" Divider Bar 207⁄8" L
VBRWC Versa Well Cover 207⁄8" x 13" x 2"
CPH3 Crock holder 127⁄8" x 207⁄8"
SBH15 Salad bowl holder for 15" bowl 253⁄4" x 207⁄8"
SBH18 Salad bowl holder for 18" bowl 253⁄4" x 207⁄8"
Case Pack: 1 DIV12 and DIV20 Case Pack: 3
OPTIONAL ACCESSORIES
CODE DESCRIPTION
CVC75LET Left end table
CVC75RET Right end table
CVC75DC6 6" tall display case
CVC75DC12 12" tall display case
CVC75DCE6 6" tall display case extender
CVC75DCE12 12" tall display case extender
CVC75LSRL Lower shelves, set of 2
Case Pack: 1 CVC75LSRL Case Pack: 2
Scan to view video
on adjusting CVC
Caster to xed or
swivel position.