Cambro Camshelving Ultimate Sheet Pan Rack User manual

Do not remove panel tie straps until
after the bottom frame is installed.
Open this User Manual for full directions.
No rompa las ataduras plásticas del
panel hasta que el marco inferior
haya sido instalado. Abra este manual
del producto para instrucciones.
STOP!
¡ALTO!
USER
MANUAL
Camshelving®
Ultimate Sheet Pan Rack

Camshelving®
Ultimate Sheet Pan Rack
User Manual
www.cambro.com
Half Size Rack
Full Size Rack
Undercounter Rack
2 Person
Assembly
Use Rubber Mallet
for Assembly
Scan for
Assembly Video
IMPORTANT!
Do not remove tie straps until after Step 1.
B
A
B
A
16 Post Connector
Frame Wedges
8
8
Premium
Plastic
Zinc
42
2
4 Casters
B
A
B
A
2 Pre-Assembled
Rail Panels
1 Top Post
Connector Frame
1 Bottom Post
Connector Frame
Use Clippers to
Remove Tie Straps
(After Step 1 is Complete)
COMPONENT

3
2
1
3
22
3
1
1
3
2
4
Assembly Instructions
Step 1: Install Bottom Post Connector Frame
IMPORTANT! Do not remove tie straps
until after bottom frame is installed.

4
5
34
5
53
4
3
5
54
3
4
3
2
1
Step 2: Install Top Post Connector Frame
Clip ALL tie straps rst and move rail panels down.

Step 3: Install Casters
A B
2
1
A B
If threaded insert set has come loose from the caster stem,
follow these steps. Then proceed to 1 below.

UMUPR
D0918135
Telephone [phone] Toll Free 800 854 7631 Customer Service 800 833 3003
© Cambro Manufacturing Company 5801 Skylab Road, Huntington Beach, California 92647-2056
Printed in USA 11/18
Care and Maintenance
Warranty
• Clean racks with hot water, mild detergent and soft cloth or sponge. Racks may also be pressure washed.
Use cleaners and degreasers designated for plastic materials.
• DO NOT use cleaners or detergents containing ammonia or bleach.
• DO NOT use steel wool, abrasive scrub pads or brushes.
• Wipe off any remaining soap and dirt with a clean cloth. Allow to air dry or use a clean cloth to wipe dry.
• Camshelving®Ultimate Sheet Pan Racks have a warranty for one year from the date of shipment from
Cambro’s distribution centers.
• The warranty is in effect provided that the product has not been altered in any way and assuming
normal and proper use and maintenance. Abuse or misuse will void the warranty.
• Camshelving Ultimate Sheet Pan Racks are warrantied against rust and corrosion on mobile posts
(with Premium Plastic Casters) and rail panels.
• Camshelving Ultimate Sheet Pan Rack Mobile Posts with Zinc Casters are NOT warrantied against
rust and corrosion.
Caution!
• Camshelving Ultimate Sheet Pan Racks are not intended for use in any type of roll-in oven.
• Do not use with or place near an open ame or against hot surfaces above 350˚F.