Campa Campalys 3.0 Mounting instructions

Campalys 3.0
Use manual

This radiator is compatible with the ECOcontrol
®
Smart
communication modules that keep your radiator connected
Discover all the advantages offered by
radiators connected to
smart-ecocontrol.campa.fr

Page 3
Read the Installation and User Manual (*) carefully, in particular the instructions below.
CAUTION - Some parts of this product may become
very hot and cause burns. Remain vigilant when
children or vulnerable adults are present.
Children under the age of 3 should not be left near the radiator unattended.
Children aged between 3 and 8 must only switch on or off the radiator if it has been positioned
or installed in a recommended position and if these children are being supervised or have been
told how to use the radiator safely and have been made aware of potential hazards. Children
aged between 3 and 8 must never plug in, adjust, clean or maintain the appliance.
This appliance may be used by children over 8 years of age and by adults with reduced
physical, sensory or mental capacities or lacking experience and knowledge, if they are carefully
supervised or if they have received instructions pertaining to safe use of the radiator and have
been made aware of and have understood the associated risks.
Children must never play with the appliance.
The radiator must not be cleaned or maintained by children unless supervised.
IMPORTANT: DO NOT COVER
The radiator may overheat if covered. The logo above indicates this risk.
You must not therefore cover or block the airways as this may result in an incident or cause
damage to the radiator.
This radiator must only be electrically connected when switched off and by a qualified
electrician.
All maintenance work on this radiator must be carried out with the radiator switched off and by
a qualified and approved operator.
If the appliance has a glass front, do not use it if this is damaged.
Please do not insert anything into the appliance.
(*) This manual was written when the appliance was manufactured and in compliance with current standards in force.
The company reserves the right to make changes to the installation and usage manual at any time in order to remain in line
with updates to standards.
Caution, hot surface
Attention surface très chaude.

Page 4
Foreword:
- You have purchased a controlled inertia®radiator with steel front and
INTERNAL INERTIAL CRYSTAL HEATING ELEMENT equipped with
all new Campa smart functions. Thank you for putting your trust in our
products.
- This appliance was researched, designed and manufactured in France to
give you complete satisfaction.
- Please read this manual in its entirety before installing and switching on
your appliance.
(*) General provisions:
This manual was drawn up based on standards in force in France, the
country in which the appliance is installed (standard NFC 15100) on the day
of appliance manufacture.
We reserve the right to make changes to this manual at any time in order to
remain in line with updates to current standards.
Our appliances must be installed and maintained by qualied personnel who
are specically trained in the domain of electrical appliance operation and
who have completed a safety training course.
We do not accept liability concerning the consequences of use of the
appliance in the following cases:
- use of the radiator without regard for the directives specied in this manual.
- failure to check the correct mains voltage (alternating current).
The yellow warning triangles in this manual must be strictly adhered to.
Regarding the diversity of the standards in force, if the appliance is used in a
country other than the country in which it was purchased, it must be checked
by a qualied expert.
Keep these instructions after installation of the appliance.
Certified quality
Our appliances are designed, developed and
manufactured at our factories in France.

Page 5
CONTENTS
p6
1.1. OPERATING YOUR APPLIANCE p6
1.2. SETTING THE SETPOINT TEMPERATURE p7
1.3. AUTOMATIC OPERATION p 7
3. ADVICE - MAINTENANCE p22
4. IDENTIFYING HEATING APPLIANCES p23
p212. TROUBLESHOOTING
1.4. MANUAL OPERATION p7
1.5. OTHER SETTINGS p8
1.6. PROGRAMMING (Time, Day, Programme, etc.) p15
1.7. RESTORING FACTORY SETTINGS p20
1. USING YOUR APPLIANCE

Page 6
1. USING YOUR APPLIANCE
Move the On/Off switch to position "1" to energise the appliance.
The thermostat heating On/Off switch lights up orange
MANUAL
MANUAL
MANUAL
.
The box
MANUAL
MANUAL
MANUAL
button controls the on, off and heating functions of
your appliance.
The buzzer sounds and the screen and green indicator light
MANUAL
MANUAL
MANUAL
come on.
1.1. OPERATING YOUR APPLIANCE
MANUAL
MANUAL
MANUAL
Heating indicator light Temperature setting
knob
Heating
On/Off
Operating mode selection
Manual
Heating
On/Off
indicator light
Activation/Deactivation
Window opening sensor
Operating mode
display
ECOcontrol Smart Touch®
Performance indicator
The heating indicator light
MANUAL
MANUAL
MANUAL
indicates appliance heating. When
the required temperature is reached and maintained, this indicator
light comes on and goes off according to heating requirements.
Remember to remove the protective film from the box
i

Page 7
Temperature setting
knob
1. USING YOUR APPLIANCE (cont'd)
1.3. AUTOMATIC OPERATION, "Smart ECOcontrol®
" BUTTON
The
MANUAL
MANUAL
MANUAL
button selects automatic operation based on your heating schedule
(programming of Comfort and Eco time periods) and your preferred settings
(favourite setpoint temperature, absence sensor, window opening sensor, etc.).
Press the
MANUAL
MANUAL
MANUAL
button for 3s to store your automatic setting preferences in the memory.
By default, the stored setting is: 19°Cas preferred temperature, window opening sensor and absence sensor activated.
i
1.2. SETTING THE SETPOINT TEMPERATURE
When setting the temperature, an indicator can be used to control and also adjust the
required temperature based on its impact on consumption.
This setting is available in Comfort mode (manual or automatic).
i
MANUAL
MANUAL
MANUAL
The + and - knob
MANUAL
MANUAL
MANUAL
is used to increase or decrease the required temperature.
If it corresponds to the temperature at which you feel most comfortable,
you can store this temperature by pressing the
MANUAL
MANUAL
MANUAL
button for 3s.
To set the temperature to its optimum value, allow it to stabilise
for several hours and keeping the room door shut.
1.4. MANUAL OPERATION, "MANUAL" BUTTON
Press the
MANUAL
MANUAL
MANUAL
button to take control of automatic appliance operation.
either in Comfort mode (required temperature can be set)
or in Eco mode (advised for short periods of absence)
or in Frost-free mode (advised for periods of absence of longer than 24 hrs)
The automatic functions are deactivated (absence sensor, programming and
temperature lowering commands sent via the Pilot Wire), and the appliance is
positioned:

Page 8
1. USING YOUR APPLIANCE (cont'd)
1.5. OTHER SETTINGS
MANUAL
MANUAL
MANUAL
1.5.1. "ECO" ECONOMY MODE
Press
MANUAL
MANUAL
MANUAL
successively until economy mode is displayed.
To display the Eco setting, rotate and release the knob
MANUAL
MANUAL
MANUAL
.
Press
MANUAL
MANUAL
MANUAL
for 3 seconds until the Eco setpoint temperature
ashes.
To change the Eco setpoint temperature:
Press
MANUAL
MANUAL
MANUAL
for 3s to save.
Rotate the knob
MANUAL
MANUAL
MANUAL
to change.
If you are planning to leave the house for a period of time no longer than 12 hours, we recommend the use of economy
mode. This lowers the temperature by approximately 3.5°C in relation to the setpoint temperature of Comfort mode.
The Eco setpoint cannot be set to a temperature higher than 19°C.
i
1.5.2. FROST-FREE MODE
MANUAL
MANUAL
MANUAL
Press
MANUAL
MANUAL
MANUAL
successively until frost-free mode is displayed.
If you are going out for a long period of time (longer than 24 hours), we recommend the use of this mode for
optimum economy. This allows the room temperature to be maintained as Frost-free.
i
1.5.3. ABSENCE SENSOR
MANUAL
MANUAL
MANUAL
By default, this function is activated in automatic mode
MANUAL
MANUAL
MANUAL
.
In the case of prolonged absence, the appliance gradually reduces its temperature setpoint. When it senses your
return, the appliance reacts and restores your set operating mode
i
Priority can be given to economy or comfort modes and it is also possible to deactivate
this function (see table on next page).

Page 9
1. USING YOUR APPLIANCE (cont'd)
Choice of absence detection operating mode
Press
MANUAL
MANUAL
MANUAL
to
switch your
appliance to
standby.
Simultaneously
press
MANUAL
MANUAL
MANUAL
and
MANUAL
MANUAL
MANUAL
for
6s until the
detection option
1, 2 or OFF is
displayed.
Rotate the
MANUAL
MANUAL
MANUAL
knob
to select the
detection
option.
Save by
pressing
MANUAL
MANUAL
MANUAL
for 3 seconds.
Option 1:
(by default)
Priority for
economy modes
Are taken into
account:
- absence detection
- all commands*.
Option 2:
Priority for
comfort
Are taken into
account:
- absence detection
- only * Frost-free,
Off and Comfort
commands.
OFF Option:
The absence
function is
deactivated
Are taken into
account:
- all commands*
Reminder: in all cases, the pilot wire Frost-free and Heating off orders take priority.
i
To prioritise comfort (Option 2), choose between internal programming and pilot
wire commands.
In addition, when a lowering order (CF-1, CF-2 or Eco) is sent to the
appliance via the pilot wire or internal programming when Option 2 was
selected, the appliance does not take this into account and the screen
displays a message to notify you of this:
* Commands: pilot wire or internal programming commands.

Page 10
Absence
Movement
ECO
Comfort
ECO
Comfort
Detection Priority for economy mode
Priority for comfort
Pilot Wire Command
OR
Internal programming Result
Result
Gradual switch to ECO
(in 1hr 30 mins)
Gradual switch to ECO
(in 1hr 30 mins)
ECO mode
Immediate switch to
Comfort mode
Immediate switch to
Comfort mode
ECO mode
Pilot Wire Command
OR
Internal programming
Absence
Movement
Detection
Comfort
ECO
1. USING YOUR APPLIANCE (cont'd)
MANUAL
MANUAL
MANUAL
1.5.4. WINDOW OPENING SENSOR
To activate or deactivate the function, press
MANUAL
MANUAL
MANUAL
.
The
MANUAL
MANUAL
MANUAL
symbol appears on the screen.
The buzzer is activated, the symbol
MANUAL
MANUAL
MANUAL
and the green indicator
light
MANUAL
MANUAL
MANUAL
ash when the appliance cuts out following detection.
To cancel this cut-out, press
MANUAL
MANUAL
MANUAL
to automatically restart the
appliance.
This function automatically cuts out the heating appliance in the event of the detection of a sudden drop in
temperature in the room (e.g. an open window or door).
i

Page 11
1. USING YOUR APPLIANCE (cont'd)
Simultaneously press
MANUAL
MANUAL
MANUAL
and
MANUAL
MANUAL
MANUAL
for
3 seconds to lock
or unlock the keyboard.
This function can be used to block access to
appliance adjustments in order to prevent any
untimely modification.
i
1.5.5. SIMPLE PARENTAL LOCK
MANUAL
MANUAL
MANUAL
MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL
MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL
1.5.6. PARENTAL LOCKING WITH CODE
MANUAL
MANUAL
MANUAL
MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL
MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL
It is
IMPORTANT
to remember this code.
If you forget, you will not be able to lock/unlock the keyboard.
i
To lock
Locked Unlocked
Only the Heating On/Off
function remains accessible.

Page 12
1. USING YOUR APPLIANCE (cont'd)
MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL
MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL
To unlock
MANUAL
MANUAL
MANUAL
1.5.7. PERFORMANCE INDICATOR
To run the appliance economically, we recommend keeping the temperature no higher than 19°C on average
throughout the home.
i
The performance indicator cursor gives information regarding the economic
aspect of appliance setting.
Cursor toward green: economy
Cursor toward red: less economic

Page 13
1. USING YOUR APPLIANCE (cont'd)
1.5.8. CONFIGURING ADDITIONAL FUNCTIONS
This menu allows you to lock and unlock some options and to adjust
some parameters.
Press
MANUAL
MANUAL
MANUAL
to switch your device to standby.
MANUAL
MANUAL
MANUAL
Simultaneously press
MANUAL
MANUAL
MANUAL
and
MANUAL
MANUAL
MANUAL
for 3s.
When the screen displays
MANUAL
MANUAL
MANUAL
, press
MANUAL
MANUAL
MANUAL
for 3s,
the rst conguration screen appears.
To switch between one conguration and another, press
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
.
Conguration
screen Meaning
MANUAL
MANUAL
MANUAL
Result
MANUAL
MANUAL
MANUAL
Permanent backlighting of screen or
limited to 10s after last use
MANUAL
MANUAL
MANUAL
Permanent
backlighting
MANUAL
MANUAL
MANUAL
10s
backlighting
MANUAL
MANUAL
MANUAL
Buzzer function:
When this function is activated,
the box emits a sound for certain
manipulations.
The buzzer always sounds when
the heating On/Off button is pressed.
MANUAL
MANUAL
MANUAL
Buzzer
deactivated
MANUAL
MANUAL
MANUAL
Buzzer
activated
MANUAL
MANUAL
MANUAL
Display the temperature in degrees
Celsius or degrees Fahrenheit
MANUAL
MANUAL
MANUAL
Degrees
Celsius unit
MANUAL
MANUAL
MANUAL
Degrees
Fahrenheit
unit
MANUAL
MANUAL
MANUAL
Capping and applying a minimum
setpoint temperature:
When this function is activated,
the Comfort temperature setting is
capped or assigned a minimum level.
The setpoint temperature can only be
altered by + or - 2°C
MANUAL
MANUAL
MANUAL
Capping and
minimum level
deactivated
MANUAL
MANUAL
MANUAL
Capping and
minimum level
activated
Back to user mode

Page 14
1. USING YOUR APPLIANCE (cont'd)
1.5.9. TIME DISPLAY
Press
MANUAL
MANUAL
MANUAL
and
MANUAL
MANUAL
MANUAL
simultaneously and release quickly to
display the current time.
MANUAL
MANUAL
MANUAL
1.5.10. DETAIL OF COMMANDS VIA THE PILOT WIRE AND ENERGY MANAGER
Command Meaning Conguration
screen
COMFORT Required room temperature
(in this case 19.0°C)
MANUAL
MANUAL
MANUAL
ECO Lowering of temperature for economy
operation
MANUAL
MANUAL
MANUAL
COMFORT -1 Lowering of temperature by 1°C
(in this case 18.0°C)
MANUAL
MANUAL
MANUAL
COMFORT -2 Lowering of temperature by 2°C
(in this case 17.0°C)
MANUAL
MANUAL
MANUAL
FROST-FREE Lowering of temperature to maintain
frost-free
MANUAL
MANUAL
MANUAL
HEATING OFF Switching off your appliance's heating
MANUAL
MANUAL
MANUAL
In manual mode, the Frost-free and Heating off commands sent by the programming unit or the pricing manager
take precedent. To identify the priority commands, the symbol flashes.
i

Page 15
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
1.6.1. SETTING THE CLOCK
For the programming to work, without exception, the time and day need to be set on the
appliance (factory setting 00:00)
If the power is cut off for more than 12 hours, the time and day will need to be reset on the appliance.
i
1.6.1.A. SETTING THE TIME
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
Press
MANUAL
MANUAL
MANUAL
and
MANUAL
MANUAL
MANUAL
for 3s to enter the
programming menu.
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
is displayed on the screen.
Turn the knob
MANUAL
MANUAL
MANUAL
to select the setting the time
function
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
in the dropdown menu
.
Change the time by turning the knob
MANUAL
MANUAL
MANUAL
and
conrm by pressing the
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
knob.
Change the minutes by turning the knob
MANUAL
MANUAL
MANUAL
and conrm by pressing the
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
knob.
Turn the knob
MANUAL
MANUAL
MANUAL
to select
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
displayed on
the screen and conrm by pressing the
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
knob.
(Select
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
to exit this setting menu).
5.6.1.B. SETTING THE DAY
To exit, turn the knob
MANUAL
MANUAL
MANUAL
until
EXIT is displayed in the dropdown
menu. Validate by pressing the
knob
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
.
Change the day of the week (JO:MON=Monday,
JO:TUES=Tuesday, JO:WED=Wednesday,
etc.) by turning the knob
MANUAL
MANUAL
MANUAL
and conrm by
pressing the
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
knob.
1. USING YOUR APPLIANCE (cont'd)
1.6. INTERNAL PROGRAMMING
Internal programming takes precedence over Pilot Wire commands (except for the
Frost-free and Off commands that take precedence over all others).
Internal programming:
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
is not applied,
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
is applied.

Page 16
1. USING YOUR APPLIANCE (cont'd)
1.6.2. IMPLEMENTING PROGRAMMING
This mode allows your heating appliance to function automatically either at Comfort
setpoint or at Eco setpoint.
i
To assign a programme to each day of the
week, press the
MANUAL
MANUAL
MANUAL
and
MANUAL
MANUAL
MANUAL
buttons for 3s to
enter the programming menu.
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
is displayed on the screen.
Validate by pressing the knob
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
.
Assign one of the programmes (predened
or personalised) to each day of the week by
turning the knob
MANUAL
MANUAL
MANUAL
and validate by pressing
the knob
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
.
To exit, turn the knob
MANUAL
MANUAL
MANUAL
until EXIT is
displayed in the dropdown menu. Validate by
pressing the knob
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
.
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
Turn the knob
MANUAL
MANUAL
MANUAL
to select
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
displayed on
the screen and conrm by pressing the
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
knob.
Select
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
to exit this setting menu and
prevent programming application.

Page 17
1. USING YOUR APPLIANCE (cont'd)
Details of predened programmes (P1 - P2 - P3)
and customisable programmes (P4 - P5 - P6)
Predened programme Choice Meaning
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
P1
The P1 programme is used
to obtain the Comfort setpoint
temperature from 5am until 9am
in the morning and from 5pm to
11pm in the evening.
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
P2
The P2 programme is used
to obtain the Comfort setpoint
temperature from 5am until 9am in
the morning, from 12pm to 2pm at
lunchtime and from 5pm to 11pm
in the evening.
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
P3
The P3 programme is used
to obtain the Comfort setpoint
temperature from 5am to 11pm at
weekends.
Customisable programmes
see 5.6.3
P4
P5
P6
Programmes P4, P5 and P6
used to customise the time
periods for the Comfort setpoint
temperature depending on needs.

Page 18
1. USING YOUR APPLIANCE (cont'd)
1.6.3. CUSTOMISING PROGRAMMES P4-P5-P6
This mode allows your heating appliance to function automatically daily either at Comfort
setpoint or at Eco setpoint.
i
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
is displayed on the screen.
Assign one of the programmes (we have used programme P4 as an example) by
turning the knob
MANUAL
MANUAL
MANUAL
and conrm by pressing the knob
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
.
This allows you to dene specic periods of time in Comfort mode or in Eco mode
(see example on next page).
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
(Select
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
to exit this setting menu).
Turn the knob
MANUAL
MANUAL
MANUAL
to select one of the programmes P4, P5 or P6 in the dropdown
menu
.
Turn the knob
MANUAL
MANUAL
MANUAL
to select
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
displayed on
the screen and conrm by pressing the
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
knob.
To assign a programme to each day of the
week, press the
MANUAL
MANUAL
MANUAL
and
MANUAL
MANUAL
MANUAL
buttons for 3s to
enter the programming menu.

Page 19
1. USING YOUR APPLIANCE (cont'd)
Customising a programme, example: P4
E.g. from
6am to 9am Choice: period of time 1 Result
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
Change ON time:
Change ON time:
Change ON time:
Change OFF time:
Change OFF time:
To exit
Change OFF time:
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
Change ON time:
Change ON time:
Change ON time:
Change OFF time:
Change OFF time:
To exit
Change OFF time:
Period of time 1 from
6am to 9am is
conrmed, switch to
period of time 2 is
automatic
E.g. from
11am to 2pm Choice: period of time 2 Result
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
Change ON time:
Change ON time:
Change ON time:
Change OFF time:
Change OFF time:
To exit
Change OFF time:
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
Change ON time:
Change ON time:
Change ON time:
Change OFF time:
Change OFF time:
To exit
Change OFF time:
Period of time 2
from 11am to 2pm is
conrmed, switch to
time period 3 is
automatic.
E.g. from
6pm to 10pm Choice: period of time 3 Result
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
Change ON time:
Change ON time:
Change ON time:
Change OFF time:
Change OFF time:
To exit
Change OFF time:
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
Change ON time:
Change ON time:
Change ON time:
Change OFF time:
Change OFF time:
To exit
Change OFF time:
Period of time 3
from 6pm to 10pm is
conrmed, the screen
displays Pr.
Programme P5 or P6
or select Exit to exit.
Conrm
We have used the example of a Monday "MON:P4".
The Comfort setpoint temperature is required over three different time periods: in
the morning from 6am to 9am, at midday from 11am to 2pm and in the evening
from 6pm to 10pm.
Repeat the process for programmes
P5 and P6, either by sticking with the previously
dened programme or by modifying it.
To exit, turn the knob
MANUAL
MANUAL
MANUAL
until EXIT is displayed in the
dropdown menu. Validate by pressing the knob
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
To exit
To exit
From Monday to Friday
Times
Times
Times
5am to 9am
12pm to 2pm 5pm to 11pm
5pm to 11pm
5am to 11pm
5am to 9am
From Monday to Friday
The weekend
.
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
Change ON time:
Change ON time:
Change ON time:
Change OFF time:
Change OFF time:
To exit
Change OFF time:

Page 20
1. USING YOUR APPLIANCE (cont'd)
1.7. RESTORING FACTORY SETTINGS
Hold the
MANUAL
MANUAL
MANUAL
button down for 10 seconds to restore factory settings:
Comfort 19°C
Eco 15.5°C
Absence sensor Activated Option 1
Window opening sensor Activated
Locking (Simple or Coded) None
Backlighting 10s
Buzzer Activated
Temperature unit °C
Capping and applying a minimum
setpoint temperature Deactivated
Table of contents
Other Campa Heater manuals