Campania International Avignon FT-290 User manual

FT
-
290AvignonFountain
Three people are recommended for the installation ofthisfountain!
R
evised
October 21, 2017
PumpKitParts List
PK800 Pump (1)
#10 stopper
#7 drain stopper
12”length 1/2”non-kinkhose (1)**
2”length 5/8”clearvinyltubing (2)**
2”length of3/4"clearvinyltubing (1)**
2”pieceof1/2”CPVC pipe (1)**
Hose clamps(2)
2.8 oztubeofsilicone (1)
SpillerSpout (3)**
Wedges(3)
*Hoseclamps maybe used asflow restrictors
**Black non-kink tubing and clear vinyltubing havebeen preassembled
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
FOUNTAININFORMATION:
Thisfountain holdsapproximately20 gallonofwater.
Thisfountain usesamediumfountain cover.
(FTNCOV-MED)
Compatible with#10 Refill Deviseand LEDKits
(Aspecialstopper isrequiredtousethe refill kit for
thisfountain.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPP800 - 800GPH Pump
16 FTcord length

FT
-
290AvignonFountain
Three people are recommended for the installation ofthisfountain!
R
evised
October 21, 2017
Assemble your fountainonalevel surface capable ofholdingaminimumof900 poundswithanapproximate 8squarefootfootprint.
FT-290F(602lbs)
52”Wx12.25”H
FT-290D(55lbs)
13.25”Wx10.5”H
FT-290B (180lbs)
11”Wx29.25”H
FT-290C (4lbs)
7”Wx1.25”H
FT-290A(83lbs)
83”Wx10”H
FT-290E(4lbs)
6.75”Lx1.5”Wx6.5”H
1. Placethe basin(FT-290F)into position where the fountain willbe installed,
ensuringthatit islevel.
2. Assemble the pump kit
a. Connectthe preassembled tubingtothe pump bysliding the 3/4"clear
tubingoverthe pump outlet.
b. NOTE:Allpumpscomewith 1 adapter already inserted intothe pump
and 2 adapterssecured tothe power cord.
i. Thisfountain usesthe largest adapter provided.
c. Placethe stopperaround the pump cord approximately8 inchesfromthe
pump.
3. Feed the pump cordthrough the holeinthe basin (FT-290F)and the channel.
4. FIRMLYpress the stopperintothehole evenly.
a. Note:Usingthehandle ofascrewdriverorhammerworksbestto pressthe
stopperin place.
5. Placethe pump cover(FT-290D)overthe pump, ensuringthatit iscentered and
level.
6. Insert the CPVCpipe connected tothetubinginto the pipe protrudingoutofthe
bottomofthe column (FT-290B).
7. Placesiliconearound the straightend ofthe 3 spoutsand twisteach one carefully
intotheholesonwaterfeature (FT-290B).
a. Note:Be surethe spoutisfacingdown towardthebasin aftertheyare
inserted.
b. Note:CPVCPipe hasalreadybeen inserted into the spillerstopromote an
even waterflow. Ifthe pipecomesout, simplyreinsertthembackintothe
spiller.
8. Placethe disc(FT-290C)inside ofthe top ofthe column (FT-290B).
9. Centerthe cap (FT-290A)on top ofthe column (FT-290B).
10. Insert the pump coverdoor(FT-290E)intothepump cover(FT-290D).
11. LetSiliconedryfor24 hours before fillingthe basinwith water.