Campania International Palos Verdes FT-303 User manual

FT
-
303
PalosVerdesFountain
Two people are recommended for the installation ofthisfountain!
PumpKitParts List
PK140 Pump(1)
#10 stopper(1)
Approx. 10”lengthof 1/2” BlackNon-Kink tubing(1)
Wedges (4)
Hose clamps(3) *
*Hoseclampsmaybeused asflowrestrictors
p
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
FOUNTAININFORMATION:
Thisfountain holdsapproximately5gallonsof water.
Thisfountain usesasmallfountain cover.
(FTNCOV-SM)
Norefill device orsubmersible lightsare suggested for
thisfountain
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPF140 - 140GPH Pump
6FTcord length
Revised October 16, 2017
SHOP NOW
SHOP NOW

FT
-
303
PalosVerdesFountain
Two people are recommended for the installation ofthisfountain!
Assemble your fountainonalevel surface capable ofholdingaminimumof250 poundswithanapproximate 1squarefootfootprint.
FT-299F(97lbs)
11.5”Lx11.5”Wx25.75”H
FT-299E(94lbs)
29.5”Wx7.25”H
FT-303C (4lbs)
8.25”Wx5.75”H
FT-303B (15lbs)
14”Wx4”H
FT-303A(3lbs)
3.5”Wx7”H
FT-304D(1lbs)
5.5”Lx1.5”Wx4”H
1. Place thebase(FT-299F)into position where thefountain will beinstalled,
ensuringthatit is level.
2. Assemblethepump kit
a. Usingahoseclamp, attach the1/2”non-kink tubingto thepump
outlet.
b. Place thestopper around thepump cord about6”fromthepump.
3. Center thelargebowl(FT-299E)over thebase(FT-299F).
4. Feed thepump cord through theholein thelargebowl(FT-299E)and the
channelin thebase(FT-299F).
5. FIRMLY press thestopper into theholpeevenly.
a. Note: Usingthehandleofascrewdriverorhammer works best.
6. Place thepump house(FT-303C)over thepump and in thecenter ofthelarge
bowl(FT-299E).
7. Feed thenon-kink tubing through thetop ofthepump house(FT-303C).
8. Center thesmall bowl(FT-303B)over thepump house(FT-303C).
9. Useahoseclamp to secure thelooseend ofthenon-kink tubingto thepipe
protrudingfromthebottomofthesmall bowl(FT-303B).
10. Center thefinial(FT-303A) over thesmall bowl(FT-303B).
11. Fit thepipeprotrudingfromthetop ofthesmall bowl(FT-303B)into the
holein thebottomofthefinial(FT-303A).
12. Fit thepump housedoor(FT-303D) into thepump house(FT-303C).
13. Fill thefountain with water.
Revised October 16, 2017
SHOP NOW