Campania International FT-320 User manual

F
T
-
320
LargeMWeaveFountain
Two people are recommended for the installation ofthisfountain!
R
evised
July18, 2018
PumpKitParts List
PK500 pump (1)
#7 drain stopper(1)
12”length of1/2”BlackNon-kinktubing (1)**
2”length of5/8”cleartubing (1)**
2”length of1/2"CPVCpipe(1)**
Wedges(3)
Hose clamps(1)*
*Hoseclamps maybe used asflow restrictors
** Tubing has been preassembled
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoinsurethat plastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
FOUNTAININFORMATION:
Thisfountain holdsapproximately20 gallonsof water.
Thisfountain usesanextra-largefountain cover.
(FTNCOV-XLG)
Compatible withbothRefill Devicesand LEDkits
(Aspecialstopper isNOTrequired tousethe refill kit
forthisfountain.
)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPF525 - 525GPH Pump
16 FTcord length

F
T
-
320
LargeMWeaveFountain
Two people are recommended for the installation ofthisfountain!
R
evised
July18, 2018
Assemble your fountainonalevel surface capable ofholdingaminimumof1200 poundswithanapproximate 6squarefootfootprint.
FT-320E (468lbs)
38”Lx25”Wx16”H
FT-320C(64lbs)
33.5”Lx6.25”Wx8.25”H
FT-320A(561 lbs)
33”Lx7.75”Wx33.5”H
FT-320B(4lbs)
29.25”Lx2.25”Wx.75”H
FT-320D(3lb)
5.5”Lx0.75”Wx6.75”H
1. Place thebasin (FT-320E)intoposition where thefountainwill be
installed, ensuringthatitislevel.
2. Assemblethepumpkit
a. NOTE: All pumpscomewith 2adapters.
i. This fountainusesthe largeradapterprovided.
b. Using ahoseclamp, attachthetubing assemblyto thepump
outlet.
3. Place thepumpin thecenter ofthepumpcover (FT-320C).
4. Laythepumpcordover theedgeatthebackofthebasin.
5. Place thewater feature(FT-320A)on topofthepumpcover and
ensure thatthepumpcordexits throughtheholeprovided.
6. InserttheCPVCpipeattachedto thepreassembledtubingintothe
couplingprotrudingfromthebottomofthewater feature (FT-
320A).
7. Place thespiller stopper (FT-320B) insidethetop ofthewater
feature.
8. Place thepumpcoverdoor(FT-320D)inthepumpaccessopening
ofthepumpcover.
9. Fillthefountainwithwater.