Campania International FT-240 User manual

FT
-
240 ThreeTierLongvueFountain
Three people are recommended for the installation ofthisfountain!
R
evised
April 6, 2017
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK800 pump (1)
#10 stopper(1)
#7 Drain stopperwith wing nut (1)
Approx.2”length of¾”clearvinyltubing (1)**
Approx.2”length of5/8”clearvinyltubing (1)**
Approx.80”length of½”blacknon-kinktubing (1)**
7 ½”length of1½”PVC pipe -stand pipe (1)
Wedges(4)
Hose clamps(3)
*Hoseclamps maybe used asflow restrictors
**Black non-kink tubing and clear vinyltubing havebeen preassembled
FOUNTAININFORMATION:
Thisfountain holdsapproximately21 gallonsof water.
Thisfountain usesamediumfountain cover.
(FTNCOV-MED)
Compatible withRefill #10 Device and LEDKit
(A different style stopper mayberequestedfor therefillkit.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
290 GPH Pump
15 FTcord length

FT
-
240 ThreeTierLongvueFountain
Three people are recommended for the installation ofthisfountain!
R
evised
April 6, 2017
Assembleyourfountainonalevelsurface capableofholdingaminimumof1052 poundswithanapproximate2.75 squarefootfootprint.
FT-239J(242 lbs)
20”Lx20”Wx12”H
FT-239I (141lbs)
15.75”Wx18.5”H
FT-239H (465 lbs)
48”Wx12”H
FT-239F(59 lbs)
12.75”Wx14.25”H
FT-239E (210lbs)
36.5”Wx10”H
FT-239C(28 lbs)
9.25”Wx13.5”H
FT-225B(55 lbs)
21.5”Wx6.75”H
FT-239A(14 lbs)
5.5”Wx13.5”H
FT-239D&G(2lbs)
Pumphousedoors
1. Placethe base (FT-239J)into position wherethe fountain willbe installed, ensuringthatit islevel.
a. Note:Check thatall components are leveledasthe fountain isassembled.
2. Centerthe large pedestal(FT-239I)overthe base.
3. Assemble the fountain plumbing
a. Attach the 3/4” cleartubingattached tothe non-kinktubingto the pump outlet.
b. Placethe stopperaround the pump cord approximately8” fromthe pump.
4. Centerthe large bowl(FT-239H)overthe large pedestal(FT-239I)makingsure the holeslineup.
5. Feed the pump cordallthe waythrough the holesin the bowl(FT-114F)and pedestal(FT-239I)then
outofthe accessdoorinthe base (FT-239J).
6. FIRMLY press the stopperintothe hole evenly.
a. Note:Usingthehandle ofascrewdriverorhammerworksbestto pressthe stopperin place.
7. Positionthe mediumpedestal(FT-239F)overthe pump inthe large bowl(FT-239H).
8. Feed the non-kinktubingconnected tothe pump through the top ofthe mediumpedestal(FT-239F).
9. Centerthe mediumbowl(FT-239E)overthe mediumpedestal(FT-239F).
10. Insert the standpipe into the middle bowl(FT-239E).
a. Feed the fountaintubingthrough the stand pipe asit isfixed intothe bowl.
11. Positionthe small pedestal(FT-239C)overthe centerofthe mediumbowl(FT-239E).
12. Feed the non-kinktubingthrough the holeinthe centerofthe small pedestal(FT-239C).
13. Usinga hoseclamp, securethe loose end ofthe non-kinktubingtothe pipe protrudingfromthe
bottomofthe smallbowl(FT-225B).
14. Centerthe small bowl(FT-225B)overthe smallpedestal(FT-239C).
15. Fit the finial(FT-239A)into the small bowl (FT-225B)byfeedingthe protrudingcopperpipe fromthe
bowlintothe holeinthe bottomofthe finial.
16. Placethe small pump coverdoor(FT-239D)intothe small pedestal(FT-239C).
17. Placethe large pump coverdoor(FT-239G)intothe mediumpedestal(FT-239F).
18. Fillthe fountain with water.