Campania International FT-337 M User manual

FT
-
3
3
7
MW
eaveDisc
Fountain
R
evised
August15, 2019
PumpKitParts List
PK300Pump(1)
LED-Ring(1)*
LED-Trans/ Transformer(1)*
LED-Cord
#10 stopper(1)
30”length1/2”non-kinkhose(1)
O-Ring(1)
Hoseclamps(1)
* DoNOTpreassemblethelightand transformer
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecure, andwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
FOUNTAININFORMATION:
Thisfountain holdsapproximately3-5 gallonsof water.
Thisfountain usesasmallfountain cover.
(FTNCOV-SM)
Norefill device orother submersible lightsare
suggested forthisfountain
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPF320 - 320GPH Pump
16 FTcord length

FT
-
3
3
7
MW
eaveDisc
Fountain
R
evised
August15, 2019
Assembleyourfountain onalevelsurface capableofholdingaminimumof225poundswith
anapproximate1.5square footfootprint.
FT-337B (176lbs)
21.75”Wx22”H
Light /Spout
FT-337A(13lbs)
16.75”Wx1”H
Transformer
1. Position thebasin (FT-337B) where thefountain is to be
installed, ensuringthatitislevel.
2. Place theO-Ring aroundthe Light /Spout.
a. TheO-Ring willsecure the
Light /Spout inplaceand
allowforthewaterto flow
correctlyin thefountain.
(IMAGE RIGHT)
3. Attachthenon-kinktubing to the Light /Spout.
4. Feedthe Light /Spout cordandnon-kinktubingthroughthe
holein thetop ofthewater feature disc(FT-337A).
5. Carefullypress the Light /Spout with O-Ring into theholeat
thetop oftheholeinthedisc.
a. Note:Useaflatheadscrewdriver orsimilartool topress
theO-Ring deeper intotheholearoundthe Light /
Spout.
6. Attachthe Pump to thenon-kink tubingwithahoseclamp.
7. Feedbothcordsthrough thePVCpipeinthebasin(FT-337B)
andout ofthechannelunderneath.
a. Note:Be sure toplaceoneplugbelowtheother. If you
tryforcing bothplugs throughatthesametime, they
will not fit.
8. Place thestopper aroundthepumpcordandlightcord.
9. FIRMLY pressthestopper intotheholeevenly.
a. Note:Usingthehandleofascrewdriverorhammer
worksbesttopressthestopperinplace.
10.Place thewater featuredisc(FT-337A)intothetop-center of
thebasin(FT-337B).
11.Connectthe Light /Spout totheLED-Cordthenthe
Transformer.
12.Fillthebasinwithwater.