Campania International Pina FT-291 User manual

FT
-
291 PinaFountain
R
evised
July21, 2017
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK140 pump (1)
#10 stopper(1)
Approx.6”length of1/2”BlackNon-Kinktubing (1)**
Approx.2”length of5/8”cleartubing (1)**
Hose clamps(3)*
*Hoseclamps maybe used asflow restrictors
**Tubing hasbeen preassembled
FOUNTAININFORMATION:
Thisfountain holdsapproximately3gallonsof water.
Thisfountain usesasmallfountain cover.
(FTNCOV-SM)
Norefill device orsubmersible lightsare suggested for
thisfountain
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPF140 - 140GPH Pump
6FTcord length

FT
-
291 PinaFountain
R
evised
July21, 2017
Assembleyourfountain onalevelsurface capableofholdingaminimumof153poundswith
anapproximate1square foot footprint.
FT-291B(120 lbs)
25”Wx21”H
FT-291A(8 lbs)
7”Wx8.25”H
1. Position thebasin (FT-291B) where thefountain
is to beinstalled, ensuringthatitislevel.
2. Assemblethepumpkit
a. Using ahoseclamp, attachthe1/2"non-
kinktubing to thepumpoutlet.
b. Place thestopper aroundthepumpcord
approximately6inchesfromthepump.
3. Feedthepumpcordthrough theholeinthe
basin(FT-291B) and outofthechannel.
4. FIRMLY press thestopper intotheholeevenly.
a. Note:Usingthehandleofascrewdriver
orhammer works besttopressthestopper
in place.
5. Coilthepumpcordinthepumphouse.
6. Fit the5/8”clear tubing to thewater feature
(FT-291A).
7. Place thewater feature(FT-291A)into thebasin
(FT-291B) ensuring thatit is level.
a. Turnthefeaturetocoil thetubingasyou
lower it intoposition.
8. Fillthefountainwithwater.