Campania International GFRCFT-1101 User guide

Revised August 30, 2017
COMPONENTSAND PARTSLIST
31”Lx22”Wx66”H
220 lbs
Pump KitPartsList
PK300 pump (1)
6”length of1/2”BlackNon-kinktubing(1)
2”length of3/8”copperpipe
#5 Drain stopper(1)
Hose clamps(2)*
*Hoseclamps maybeusedasflowrestrictors
GFRCFT-1101 Brentwood Fountain
(1 pieces)
Toolsyou will need
Level
Thisfountain
usesfountaincover
FTNCOV-LG

Revised August 30, 2017
ASSEMBLYINSTRUCTIONS
1.Makesureyou areassemblingyour fountainonalevelsurface.
2.Assemblethe pumpkit
a.Attachone endof thenon-kink tubing tothepump.
b.Insertthe 2”copperpipe provided about 1”intothe1/2” endof thetubingassembly.
c.Securethe copper pipeintoplace withahose clamp.
3.Place the assembledpumpkit intothebasinnexttothehose protrudingfromthe inside backofthe
fountain.
4.Fit thecopperpipe thatyou attached tothetubingassemblyintothetubingprotrudingfrom inside
the fountain.
5.Feed thepumpcordthroughtheholeinthe backofthe fountain.
6.Fit the#5 drainstopperintothe drainhole.
7. Fill the fountainwithwater.
WINTER CAREAND GENERALFOUNTAIN INSTRUCTIONS
-WINTERCARE-
Fountainbowls/topsandotherfountain components,which collectwater, shouldnot be left outside in the wintersince
anycomponent, which fillswith waterandfreezesmaycrack. Likewise componentssuch aspedestals,whichremain
in abasin, filled withwater,which thenfreezes, mayalso crackorcrumble. Ideally, therefore, a fountain should always
be storedindoors orina dryprotected place such asa covered porchawayfromthe elements. However,ifa fountain
must be left outside:
(1)Remove pump, rubberstoppers, drainpipes, finials,and othersmall componentsforstorage indoors. Note
that stoppers ordrainpipesare removed to allow drainage in the event wateraccumulatesin anybasin.
(2)Raisefountainbase fromground with wood stripsso that basewillnot freeze totheground surface.
(3)Coverorwrap thefountainwith burlap orotherabsorbent material(oldblanket ortowel)and then cover
securelywith plastic, making sure that waterwillnot accumulate in the basin orotherfountain component and freeze;
(4)Checkfountainperiodicallyto insure that plasticissecure and waterisnot accumulating in anyfountain
component.
-GENERALFOUNTAINTIPS-
Installfountainson alevelsurface. You willneeda properlygrounded 110-volt (AC only)GFCI protectedreceptacle
nearthe fountain foryourpump. All pumpsare submersibleandmust be completelyunderwaterto function properly.
Test all pumpsand adjust to full output priortoassembly. It isnot recommended that fountainsbe placed directlyon
grass ordirt. Position the channelopening at the baseofeach fountaintoward the electricaloutletto be used since the
pump cord willbethreaded through thisopening.
Formore Campaniaproduct information visit www.campaniainternational.com
GFRCFT-1101 Brentwood Fountain
(1 pieces)